Add function pointer and initialize with function
to update stats for WKK
Add new fields in structure cdp tx stats
CRs-Fixed: 3071271
Change-Id: Ib1fd867e414b8a61cff4f462434c51541f925f62
Moving HTT parsing to common file dp_mon.c
Initialize function pointer to stats ind handler for BE
CRs-Fixed: 3071271
Change-Id: I08fb98f8dbed075c3b49baebca399771bfb5077c
Memset Rx ingress stats of pdev to 0 when user makes a request
for ifconfig output for radio.
Also correct the computation of rx_errors stat for ifconfig radio
output.
Change-Id: I78110602b939db0117cf26ca0f8f70cd1ef7b1e8
CRs-Fixed: 3088982
In the case of MCC due to low power mode atomic operation in
accessing the bank is resulting the crash.
Fix crash by using spinlock for WIN and mutex for MCC.
Change-Id: I5bb49cbed32e41ad88bfaeb24496adb180e37551
Currently dp_mon_register_intr_ops is defined conditionally
using DISABLE_MON_CONFIG macro but function call is independent of
DISABLE_MON_CONFIG which may cause compilation issue when
DISABLE_MON_CONFIG is disabled.
Fix is to add void function definition when DISABLE_MON_CONFIG
is disabled.
Change-Id: I5f0bafa1aa3560a5828500a687b8b11178ab945b
CRs-Fixed: 3084193
Offsets used by host for HTT stats are not aligned as per the
structure declaration given in file htt.h .
Make change to use the correct offsets to get the correct stats.
Also make change for byte count computation.
Also make cleanup changes for FR65817.
Change-Id: I8bc6164cc4994c49536d7277779f25b258be1592
CRs-Fixed: 3082742
Refine dp pdev vdev stats updating function to non-inline to avoid kasan
building failure.
Change-Id: I896f28831198632c61735ccc10ed4aedb30a8232
CRs-Fixed: 3085365
in some corner cases (ex: SG frames are received) we
do not decrement quota or num_pending and go and fetch
the next descriptor, chances are ring may not have valid
descriptors at that point of time hence added this sanity
check.
Change-Id: I6994cc69c35de6bed7a71adca0a1d66ed5c94d3c
tso_desc is assigned to msdu_ext_desc in dp_tx_prepare_desc
for TSO packet even before msdu_ext_desc is configured which
could result in NULL pointer dereference.
Fix is to set the tso_desc and tso_num_desc in msdu_ext_desc
post dp_tx_prepare_ext_desc.
Change-Id: I62279c94ea7037b3f6a92644ae7eb6a5e63631f6
CRs-Fixed: 3083846
Define the interface for Host and FW communication required for
configuration of HW vdev stats in BE architecture and add handler
for vdev stats received from FW.
Change-Id: I5f6a703596bd1fbb5e27e6261befda25aa0c3e12
CRs-Fixed: 3067843
Following peer stats are updated in per packet Rx path:
to_stack
multicast
broadcast
In BE architecture, HW provides the support for basic vdev stats and
hence per packet stats updation of above parameters can be done only
when enhanced stats is enabled or HW vdev offload stats is disabled.
Avoiding per packet stats updation reduces CPU load and improves KPI.
Change-Id: Id7c11c025a8464951b615a7f7b006ce61db487fc
CRs-Fixed: 3067843
Following peer stats are updated in per packet Tx completion path:
comp_pkt: Pkt Info for which completions were received
tx_failed: Total Tx failure
In BE architecture, HW provides the support for basic vdev stats and
hence per packet stats updation of above parameters can be done only
when enhanced stats is enabled or HW vdev offload stats is disabled.
Avoiding per packet stats updation reduces CPU load and improves KPI.
Change-Id: I7090d1a1ce0a882236e3310e3e9517149cbb146b
CRs-Fixed: 3067843
In BE architecture, HW provides basic vdev stats support for upto
48 vdevs. For each vdev, there is vdev_stats_id which represents the
id of this vdev on HW. This vdev_stats_id is assigned by host and
is conveyed to HW at the time of REO TID Queue setup for the peer.
Add logic for allocation and deallocation of vdev_stats_id and
convey this id to HW.
Change-Id: If5611bf54d057ccf71c6444b5c79a26eb28df87e
CRs-Fixed: 3067843
Add configuration at SOC level for hw vdev stats in BE architecture.
Following config parameters are added:
vdev_stats_hw_offload: option to enable/disable hw vdev stats
hw_vdev_stats_timer: timer duration for hw vdev stats
Change-Id: I8cbd2b6a7378d8a9e7de920a3a6fdff0cf7785fe
CRs-Fixed: 3067843
In the case of RAW mode, VAP parameters encap type, dscp_to_tid map id
and cipher are not updating in bank register.
Added a API to update vdev param.
Change-Id: I702bee563e7451f403fa32292bf20680cd66e213
CRs-Fixed: 3078687
Due to DP flow control network queues are stuck in
paused state and not getting reset even after new connection.
This is causing DHCP packets to be dropped and resulting
immediate disconnection after every connection.
Fix this by properly pausing and unpausing the AC flow control
based network subqueues during disconnection/connection events.
Change-Id: I280e704d5a01b19d180c32aaa272c0cb731f8c0e
CRs-Fixed: 3078745
In ME6 we are currently using a workaround to send the native wifi packet
through the exception path, as the older HKv1 hardware didn’t support
single packet AMSDU. Since, the hardware is supporting this starting
from HKv2, we are sending ME packets as normal packets to FW with
DMS indication in Peer based meta for Beryllium.
Change-Id: Ic154b438df2c811c845e7c2eaadf252985d419ad
This change will enable packet logging for the fragments
from RX monitor status ring and send it to the pktlog module
for post processing through WDI event.
Change-Id: I283a20e7d0fa1f9b88223a989beda529beff6718
CRs-Fixed: 3074184
Whenever firmware receives the sync interrupt, it would
update the MLO offset to the scratch registers. Additionally,
firmware also sends a HTT message.
The values from the HTT message are copied into two structures:
1. into the dp_pdev structure, for monitor mode usage
2. into the scn structure for updating the pktlog header
A new WDI event is introduced for MLO timestamp sync into
pktlog header. Host sends the WDI event once it receives
htt msg and the data gets parsed in the pktlog handler and
eventually pktlog header gets updated with those values.
Whenever pktlog memory is being filled, the latest value from scn
structure is filled into the pktlog header. Upon receiving a new
HTT message, the value in the scn structure is updated and
subsequently into the pktlog records as well. All the 8 bytes
from the HTT message are required to calculate the MLO timestamp
offset. The calculation of MLO timestamp offset is to be taken
care by the PKTLOG parsing script.
Change-Id: If1d40b4a889e58b358f0feae692958bca2b8e1de
CRs-Fixed: 3074184
- A new pktlog mode called "hybrid", is added for QCN9224 only.
- Create WDI event for hybrid mode
- Add dummy APIs for monitor filter setting
- Send WMI_PKTLOG_EVENT_HYBRID_TX to FW for umac TLV subscription
Change-Id: I47f4e14bfc766f29a0ab4a8c07ab19e0d919e66b
CRs-Fixed: 3074184
In case of WIN hal_soc will be freed in wifi down
path, this pointer is not valid at pdev_detach or
soc_detach.
Change to populate dmac source ring flag to dp_soc
as access is needed at pdev_detach or soc_detach
Change-Id: I628746bdd05ba3791d3d0e6b6dfdf160ed368e9a
Split setup API for IPA Rx Refill Ring into allocation and
initialization APIs and call them at pdev attach and pdev init
respectively.
Similary split cleanup API into deinitialization and free APIs
and call them at pdev deinit and detach respectively.
Move procedures related to IPA Tx and WBM rings from pdev to soc.
Also add cdp support to set ipa cfg parameter in soc_cfg struct.
Change-Id: I04bb9270ae2dff51746a42b358fbe346f1087f84
CRs-Fixed: 3053542
CCE disable was done for 8074 V1 specifically which is no longer
needed for future releases and hence removing CCE check in TX.
per packet path
Change-Id: Ia31c5e2cb181e4a3409fa1f1abce8c55524b1b05
Fix the invalid VAP instance error seen when RCC is
enabled and ol_ath_stats (enhanced stats) feature is
disabled case.
Populate gI as well similar to other rate stats in
CFR handler where this information would not be
available if ol_ath_stats is disabled.
CRs-Fixed: 3056621
Change-Id: Id1af6359408cb977ba0becf298121ee10dd5ef72
Rx patch changes for multichip MLO
1. Create ini for rx ring mask for each chip
2. Configure hash based routing for each chip based
on lmac_peer_id_msb
3. Peer setup changes to configure lmac_peer_id_msb
to enable hash based routing
4. Rx Replenish changes to provide buffers back to owner
SOC of reo ring
Change-Id: Ibbe6e81f9e62d88d9bb289a082dd14b4362252c4
DP peer changes required for multi-chip MLO.
This change includes
1) Adding MLO peer to global peer hash at ML context
2) Add ML peer to all partner chips id to objtable
Change-Id: I230a6c1b14484c587b190a9a318fe9ffb1caea11
Changes needed for MLO soc attach to pass chip_id,
dp_ml_context from upper layer.
This change also takes care of assigning appropriate
RBM id for IDLE link descriptors based on chip_id.
Change-Id: I8f5f08c524d91942e6e458f048700b7bdd900107
Changes to have HW cookie conversion context per
desc pool.
This context will be used to program CMEM of the
other SOC in case multi-chip MLO.
Change-Id: I5ec68813e8fcb6d124698a52f5553acf9a7b1795
Prefetch RX HW desc, SW desc and SKB in pipeline
fasion in the first loop of RX processing.
This has improved TPUT by 200Mbps and provided a
10% gain in CPU (single core)
PINE with other optimizations: 3960Mbps @ 100% core-3
PINE + pipeline prefetch: 4130Mbps @ 90% core-3
Change-Id: I47f351601b264eb3a2b50e4154229d55da738724
Added an API to do a batch invalidation of REO descs
saw an improvement of 40 to 45 Mbps.
Note: this change is applicable only for cached
descriptors
PINE with Default driver: 3189 @ 100% core-3
PINE with skb prefetch: 3469 @ 100% core-3
PINE with skb pre + batch inv: 3506 @ 100% core-3
Change-Id: Ic2cf294972acfe5765448a18bed7e903562836c3
This force use BA64 ini config is no longer needed, because another
gRxAggregationSize can do the same settings and more flexible.
Change is used to remove this config.
Change-Id: Ie780489849f8b701481a628a9bca2b4112460bd8
CRs-Fixed: 3076982
Dynamic GRO feature is enabled by default and aimed for specific
customers. Add an ini control to allow other customers to config
this feature enable/disable.
Change-Id: I7f505599327ac131b3cdac9b4d9e038861b1aeb6
CRs-Fixed: 3074689
For IPQ products, there is 1 refill ring which is of hardware type
and host replenishes the buffers onto this ring so that hardware can
use these buffers for Rx.
In IPA offload mode, the buffer replenishment model is different from
the one mentioned above. There are 3 refill rings, out of which,
2 are software refill rings (1 for host and 1 for IPA), and last ring
is hardware ring given to FW.
Ring given to IPA is to refill the buffers after processing the
regular Rx packets and ring given to host is to refill the buffers
after processing of exception packets. Since there are 2 entities to
refill the buffers, the hardware ring given to FW multiplexes these 2
software rings and provides the buffers to hardware.
Make changes to follow above replenishment model for SDX+Pine
integration.
Change-Id: I0d9e4ec811a3023a258e0a6b9ee22ccdffcebafa
CRs-Fixed: 3049633
