Currently peer ref_cnt increments and decrements are done by the caller
function. Wrap peer->ref_cnt increment and decrement into MACRO calls so
they can be tracked.
Change-Id: I64d8b85d5898545bbc5a4b81101d1fd306de3fc9
CRs-Fixed: 2005652
It just enumerates qdf list but do not remove element when cleanup
vdev response queue or hold request queue in wma layer, which cause
element duplicate free. Use adaptive method to cleanup them.
Change-Id: I85f71252c6452d31649295cb13aa0eeef2323b5a
CRs-Fixed: 2073394
In case of reassoc event handler, it may be possible that driver
doesn't inform kernel about the new bss as well as doesn't reset
the reference count of this bss due to memory allocation failure.
Add changes to reset bss reference count if memory allocation
failed.
Change-Id: I6844d9387dd018e24a4d15bd567294e08ae43941
CRs-Fixed: 2075074
qcacld-2.0 to qcacld-3.0 propagation
Checking every node in STA hash table when sending action frame. When
sending action frame, the driver will loop through the STA info hash
table to find all the STA need to recv unicast action frame. The STA
info stored in hash table from the second node to the last, the first
node is empty. But the current loop through policy lost the last node,
so change the loop count to fix this issue.
Change-Id: I323d7af5ea0871677ebf8bebe88eaff072efdac8
CRs-Fixed: 1098738
For encryption mode is WEP40 or WEP104, the default key index should
be set. if not set, the group key index will be zero always.
Change-Id: I3f2dae9d7b6cd4fbb7aa2882e6a5e89cf759cd11
CRs-Fixed: 2065988
Fix the restriction of not sending ROAM_START command if the
previously sent command was an UPDATE_CFG command. There is
no such requirement.If the framework sends a BLACK_LIST update
command, then it is sent to firmware even in case of disconnected
state for the sake of PNO. The subsequent connection triggers a
ROAM_START command and it is not sent to the firmware due to
the current restriction
Move the global flag of saving the status of roam start sent to
firmware into the session
If a ROAM STOP is being sent to the firmware directly to WMA, then
update the relevant flags in the session
Change-Id: I6c42bc7d1e10352883edc7e715ea1418835cd142
CRs-Fixed: 2074836
Call sme close session if sme open session times out, to clean up
the vdev created.
Change-Id: Icd718138d0198a6285243a15eb56ce912149f038
CRs-Fixed: 2043263
The length of buffer used to send wmi roam scan filter cmd is not
properly calculated and the length is less than the data to be copied.
Fix it by properly calculating the length of the buffer.
Change-Id: I971ff3c1313d617cc3174150c738ba20f931d2a1
CRs-Fixed: 2072064
Address the following issues identified for mScanPending:
* Do not ensure mScanPending is set in hdd_cfg80211_scan_done_callback
* Always set mScanPending to false in hdd_start_all_adapters
Change-Id: I233b8208cea0661c1d8834704e44a311e662dc47
CRs-Fixed: 2073232
snr_monitor_enabled in the mac context can be overwritten while
applying sme config again.
Add changes to retain value of snr_monitor_enabled from initial
configuration.
Change-Id: I60522fa27407506522efb45a9c5d3e7a5ac04ef2
CRs-Fixed: 2056870
In the reg channel info which is sent to external channel
selection daemon, Some channel flags are missing which causes
application to select wrong channel.
Add changes to correct channel flags.
Change-Id: I80834dd7f5f4bfbd2fce88084a938356a741140c
CRs-Fixed: 2068354
warning: implicit conversion from enumeration type 'QDF_STATUS' to
different enumeration type 'enum tSirRetStatus' [-Wenum-conversion].
Change-Id: I4627325a927c36f3c4f9bb6d89f04146784d458a
CRs-Fixed: 2055487
warning: implicit conversion from enumeration type 'enum hdd_wmm_user_mode'
to different enumeration type 'eCsrRoamWmmUserModeType' [-Wenum-conversion].
Add a utility function to convert enum hdd_wmm_user_mode to
eCsrRoamWmmUserModeType.
Change-Id: Iefbe7dd55bd51da2e019b528d64f9889abfd4d32
CRs-Fixed: 2055487
warning: implicit conversion from enumeration type 'enum pkt_filter_action' to
different enumeration type 'eSirReceivePacketFilterType' [-Wenum-conversion]
Change-Id: Idc819573712a54676ed0ba84d2032d80fd78b3b7
CRs-Fixed: 2055487
Currently at TSO segment free it's debug information is not
cleared. TSO segment TX descriptor owner is part of the debug
information. As a result even after segment free still its
point to stale TX descriptor as it's owner. In this change at
TSO segment free set TX desc owner to NULL.
Change-Id: I09f927d78c7b3aa4691aa69acbd4cef5002cf11d
CRs-Fixed: 2063433
Expand crash_inject command so that it can be used to simulate host
driver initiated recovery.
Change-Id: Ia29a528c7153ea2ca62094909cb535f218f7bf88
CRs-fixed: 2068035
Add the interface that host driver can trigger FW assert and do
recovery for QCA6290.
Change-Id: I03a9c374fd2ddc5cc46b9b0a98ce05bcf80a53ec
CRs-fixed: 2068035
HDD always sets periodicity=0 and cache=false so all logic
that exists to support these options can be removed from SME/CSR.
Change-Id: Ica9848badd09d14f50c44998ce830568e2b76024
CRs-Fixed: 2063484
Locally administered bit needs to be set and multicast bit
needs to be reset in the interface/vdev mac address.
Change-Id: Ifdc39a8137617ebf2d09434deba13767f0c7cf34
CRs-Fixed: 2059150
Use cnss_utils APIs to set/get wlan info as these APIs are platform
independent.
CRs-Fixed: 2071683
Change-Id: Ia35a648a1d4dff308b830bce3b4e9992de2a2834
To support reg-domain at pdev level, modify the usage of some
apis to pdev level.
Change-Id: I37c504f77c7704553714cc74cba6c5ef882e774c
CRs-Fixed: 2048784
Currently there is no nl policy defined for vendor sub command
QCA_NL80211_VENDOR_SUBCMD_GET_CONCURRENCY_MATRIX which may result in
buffer overread error.
To resolve this, add nl policy.
Change-Id: I155efdbb07f1c5fe300bb2be0c2a3fe07c7e134b
CRs-Fixed: 2054690
Update the DBS capability of HW in vendor attribute
'QCA_WLAN_VENDOR_ATTR_CONCURRENCY_CAPA' of vendor sub command
'QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES'.
CRs-Fixed: 2064411
Change-Id: I79ddd50a31c7627706684ddb1e5dbab667bf028d
Fix implicit conversion from enumeration type 'enum eSirMacStatusCodes'
to different enumeration type 'tSirResultCodes' (aka 'enum
eSirResultCodes')
Fix implicit conversion from enumeration type 'QDF_MODULE_ID' to
different enumeration type 'CDS_MQ_ID'
Fix implicit conversion from enumeration type 'enum eSirRetStatus' to
different enumeration type 'tSirResultCodes'
Fix implicit conversion from enumeration type 'QDF_STATUS' to different
enumeration type 'tSirResultCodes'
Fix implicit conversion from enumeration type 'tSirMacReasonCodes' (aka
'enum eSirMacReasonCodes') to different enumeration type
'tSirResultCodes'
Change-Id: I2e769dcf34a54959082d8154b1e9377b356d2f5e
CRs-Fixed: 2063149
Fix implicit conversion from type 'enum driver_type' to different
enumeration type 't_wma_drv_type'
Remove duplicate data structure
Change-Id: Iccf1bed796c0a67109788ce434ab9115b378dd43
CRs-Fixed: 2063149
Host is required to send HTT messages to firmware to configure
and enable monitor mode. The HTT message requests the firmware
to subscribe the TLVs, packet types and also monitor mode type.
CRs-Fixed: 2071621
Change-Id: If2da5de01f3a7eb594e25b421bc17f97498c8a92
Increase the scan ageing timer value from 30 seconds
to 90 seconds for the configuration item
gScanAgingTime
Change-Id: Ic4f87c20601f753c71710d20ed98bdb774538f82
CRs-Fixed: 2072461
qcacld-2.0 to qcacld-3.0 propagation
Host driver can send number of max AMSDUs in transmit frames.
Added a call to process_wma_set_command() similar to CLI
command processing for GEN_VDEV_PARAM_AMSDU during device
initialization.
Changed name of the field from isAmsduSupportInAMPDU to max_amsdu_num
in several places. Existing SME and LIM code passes this parameter
to WMA, but it is not used there. It may be useful if AMSDU setting
is changed to per-vdev basis in future.
WCNSS_qcom_cfg.ini changes:
Removed - "gAmsduSupportInAMPDU"
Added - Name = "gMaxAmsduNum", Min = 0, Max = 3, Default = 1
Actual function call to ol_txrx_aggr_cfg() send the parameters to
firmware is commented out because it is not implemented in firmware.
Change-Id: I2dfdd8c8c4a8807596ff28eee192ef66ac425653
CRs-Fixed: 871686
