- add support to skip lazy unmapping for decoder
output buffers only. Map twice for these buffers.
- v4l2 client owned RO SMMU mapped buffers are
maintained separately in read_only list.
- For FBD with RO flag from fw, add buffer to read_only
list. Else remove from this list.
- During FTB, if buffer present in read_only list,
add RO flag to hfi buffer and queue to fw.
- During streamoff output, unmap all buffers except
those present in read_only list.
- During close, unmap completely and clean up read_only
list, output list.
Change-Id: Iacee7d298dfbff0b9cb6f17dff27ad98574b489b
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Do not access buffers list of an instance without
acquiring its instance lock in msm_vidc_set_clocks()
and msm_vidc_set_buses().
Change-Id: Ic7e8e15eaddca3b77bd4eccc6b728de20d3bcc78
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Following changes are added with this:
1. Handle and adjust session priority.
2. Session addmission based on priority.
3. Power (clock and bus) scaling based on priority.
4. Handle s_parm influence on priority.
Change-Id: I12dec5fb03d733f07b0b0a24b4d74d1ccd4bf791
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Instead of formulating session_id, codec_type, domain at
each log print, used pre-formatted char array to print
the vidc logs.
Change-Id: If7a93ecb25a7b1b98ebca6f39e3990079c00b5dd
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Currently msm_vidc_close is called directly for any failure
in msm_vidc_open(at any level). So i.e leading to free without
alloc & deinit without init problems.
Example:
if msm_vdec_inst_init is failed, msm_vidc_event_queue_deinit
will be called as part of msm_vidc_close and leading to crash
at v4l2_fh_del.
v4l2_fh_del should be called only if v4l2_fh_add is successful.
Change-Id: I5dd063c19327b881f533aa141f77b23ee7fad125
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Add support to added buf flags in dequeued buffers based
on HFI_PROP_NO_OUTPUT and HFI_PROP_PICTURE_TYPE property
values received from video fw.
Change-Id: Icf285ab7feb88daf8991705964ed0d3214c99870
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Iris2 specific calculations for Work Mode and Route.
Also add quality mode support.
Change-Id: I7a1e2fa27236aa749978d146d85fd0af6177084c
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
Add support for some advance controls to set adjusted
client set values to video fw. Mentioned below
are the properties added.
- HFI_PROP_LTR_COUNT
- HFI_PROP_LTR_USE
- HFI_PROP_LTR_MARK
- HFI_PROP_IR_RANDOM_PERIOD
- HFI_PROP_AUD
- HFI_PROP_TIME_DELTA_BASED_RATE_CONTROL
- HFI_PROP_8X8_TRANSFORM
- HFI_PROP_LTR_MARK_USE_DETAILS
- HFI_PROP_DEBLOCKING_MODE
Change-Id: Id31e9774154556df7c66cda366913489815a2723
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Add support for S_PARM and G_PARM to enable client to
set and get frame rate and operating rate to driver. Also
includes some inst database grooming changes.
Change-Id: I5b39537662faa56effa0ac63acdfc100d83bf403
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
- post input psc, output psc and last flag
events to response work handler
- fix issue with release and create internal
buffers during input psc
- clear last flag after session continue
Change-Id: Ic0278a09a0f6ee8ffff8840a47cd80c046ecadc4
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Add support for all the required instance states and
move the states accordingly.
Change-Id: Iac1046ab8c7a0116df6ed3069d566c7a1b65e61c
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Add support to get and set selection to update
crop and compose values in driver.
Change-Id: I1f38ac6a4f3ceac64d08d66f30b422efd79959a9
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Allocate ARP buffer in CB4 to avoid HW hang issue.
Add support to set HFI_PROP_RAW_RESOLUTION at enc INPUT port
and did necessary changes to set HFI_PROP_CROP_OFFSETS at
OUTPUT port only for encoder. Also added support to set
missing basic control properties to video firmware.
Change-Id: If5bc2940d37ac20c1889cd4de466be09f1e1f28b
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Set ipsc subscribe properties once during start input
and opsc subscribe once during start output. Fetch all
property values from ipsc and set the same values to
output port.
added codec config control support.
Change-Id: I3683becdb62096ee4dbed36181a2dc9876c53724
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Firmware returns meta buffer after actual buffer but
client needs meta buffer before actual buffer. Handle
the case using MSM_VIDC_ATTR_DEQUEUED flag.
Change-Id: I99048a2f110a1b14bc4bb140b6211afa340c9f38
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
add support for input port settings change raised
by fw. update driver subscribed port settings
properties with instance. Raise event to client.
Release, get, create and queue input internal buffers.
Send resume commond to fw on input port.
Add support to destroy internal buffers.
Change-Id: Ic979cf2d0c7298b8083347173a973d553ed52af8
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Add support to encoder start and stop streaming sequence.
Change-Id: Ie4f124af212ed030178d0e2fe5af3d6f9f639aa0
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
- Add queue buffer support
- Add dequeue buffer support
- Use multiple plane buffers instead of single plane.
Change-Id: I911784a1fa4b8a4b5d3fd35049379ea35d4d52b0
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
add support for session open, close and set codec.
Change-Id: Ic2f7a953a0d90215fab0a0d141957c3eb1a8cc78
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Add queue buffer support for sending buffers to
firmware.
Change-Id: Ie573c10a9b2f32a3eb202f97227b5e7edea26705
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Add support for control initialization and set control
implementation. Modified hfi_create_header() and
hfi_create_packet() to handle offset and num_packets
within in the function itself.
Change-Id: If8560be8a884c5df2fcc91f75be90311f1003a41
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Add decoder input streamon functionality which
include internal buffers support as well.
Change-Id: Ifb5afa51a29270705863c273d1ae08310666895d
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Add support for
- set and get format
- get min buffers
- request buffers
Change-Id: I0696386e10fc9571a99853070c108832873c4923
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
