Add the following WLAN_REG ini configs and FE_BEAMFORM
cfg items to MLME cfg:
1. WNI_CFG_11D_ENABLED
2. WNI_CFG_11H_ENABLED
3. WNI_CFG_TX_BF_CAP
4. WNI_CFG_AS_CAP
5. WNI_CFG_DISABLE_LDPC_WITH_TXBF_AP
Introduce the basic infra APIs related to these configs
from mlme.
In csr_roam_open_session, lim_populate_vht_mcs_set,
lim_sta_send_add_bss, populate_dot11f_tdls_ht_vht_cap,
populate_dot11f_vht_caps and sme_update_nss, local structure
is updated instead of mlme global structure for vht caps and
thus the mlme vht caps contains only the default values.
Fix this by updating mlme vht caps in mlme_update_vht_cap.
Change-Id: I1a948d7a44ad2bcc7f711c46b278971d7e4026e7
CRs-Fixed: 2354562
Add power items related CFG items in new file,
and store the respective inis in MLME component
Change-Id: Iac183da52495aca07c6270edeb9f383ab49c1ff5
CRs-Fixed: 2341900
The second part of LFR INIs are defined dynamically in legacy codes.
Refines these INIs and APIs based on new cfg component.
Change-Id: I89869c50952bf2fe403079299b3902fc53c11d61
CRs-Fixed: 2346784
Based on new cfg component, refactor CFG_TX_POWER_CTRL_NAME and clean
up related legacy codes.
Change-Id: I6dd317d5065c4111b71a9fe94d9b9af1f7d3d664
CRs-Fixed: 2355918
Based on new cfg component, refactor INI CFG_OVERRIDE_HT40_20_24GHZ_NAME
and remove legacy codes.
Change-Id: I5b4ed96a4930a9358bd93ee809bf5cddb2787fb4
CRs-Fixed: 2354476
Cleanup multiple HT related CFG/INI Items which are already moved to the
MLME component.
Also move gShortSlotTimeEnabled INI from HDD to MLME component
Change-Id: Ie8c19f508401d4d72990f35ea5dcc18d45f0f16b
CRs-Fixed: 2354687
Refactor ini items gSapForce11NFor11AC and gGoForce11NFor11AC
into new mlme component.
Change-Id: I85e2f7f9ae14a23c322572290b095aae0f29b0ec
CRs-Fixed: 2354940
Add the following WMM config ini configs to MLME cfg:
1. CFG_QOS_WMM_INFRA_INACTIVITY_INTERVAL_NAME
2. CFG_QOS_WMM_BURST_SIZE_DEFN_NAME
3. CFG_QOS_WMM_TS_INFO_ACK_POLICY_NAME
4. CFG_QOS_ADDTS_WHEN_ACM_IS_OFF_NAME
Introduce the basic infra APIs related to these configs
from mlme.
Change-Id: I149971768a7193099926e2778f093dcd073f0461
CRs-Fixed: 2327692
Refactor HE cap cfg items to new mlme component using
updated cfg architecture.
Change-Id: Ib983d3fc983dfffd2eee7efd1a4e3681d26d84a6
CRs-Fixed: 2351420
Store the ini and dynamic configurations in the
respective vdev's mlme priv obj.
Change-Id: Ib7a90937799a188dd729c91e7ee248d3287951c5
CRs-Fixed: 2349201
Define two different mlme priv obj structures
based upon the flag CONFIG_VDEV_SM, for the
support of dynamic nss, chains update.
Change-Id: I00f39eb82973da86233ddfc8bdcc94b6ca8a439a
CRs-Fixed: 2349200
Add prefix NSS_CHAINS to band info to remove duplicate band
info in driver, and minor code cleanup.
Change-Id: I3a8446af6b6c272cfcb19583540e2384f64e3a1a
CRs-Fixed: 2347624
Populate the ini and dynamic params from the mlme
component and store them to the respective
vdev component in mlme priv obj during vdev create.
Change-Id: Ic80526e51ba97c24b5340843fc97406a6ba4c7ef
CRs-Fixed: 2347504
Add the following HT Caps related INI/CFG items to MLME component.
gShortPreamble, CFG_HT_AMPDU_PARAMS, CFG_EXT_HT_CAP_INFO,
CFG_HT_INFO_FIELD, gEnableAMPDUPS and gMaxAmsduNum.
Change-Id: I019961016a2f0e39c7c62066c04788d3bd3d37e7
CRs-Fixed: 2318579
Add the following WMM BE VO ini configs to MLME cfg:
1. CFG_QOS_WMM_INFRA_DIR_AC_BK_NAME
2. CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BK_NAME
3. CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BK_NAME
4. CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BK_NAME
5. CFG_QOS_WMM_INFRA_SBA_AC_BK_NAME
6. CFG_QOS_WMM_INFRA_UAPSD_BK_SRV_INTV_NAME
7. CFG_QOS_WMM_INFRA_UAPSD_BK_SUS_INTV_NAME
Introduce the basic infra APIs related to these configs
from mlme.
Change-Id: I1f8e6f0fa1ff15eda36a20ee06772c4a1ddd9ca8
CRs-Fixed: 2327690
Add the following WMM BE VO ini configs to MLME cfg:
1. CFG_QOS_WMM_INFRA_DIR_AC_BE_NAME
2. CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BE_NAME
3. CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BE_NAME
4. CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BE_NAME
5. CFG_QOS_WMM_INFRA_SBA_AC_BE_NAME
6. CFG_QOS_WMM_INFRA_UAPSD_BE_SRV_INTV_NAME
7. CFG_QOS_WMM_INFRA_UAPSD_BE_SUS_INTV_NAME
Introduce the basic infra APIs related to these configs
from mlme.
Change-Id: Ibaf06ba2df07a4805d31a4748809c44d143dd12e
CRs-Fixed: 2327689
Add the following WMM AC VI ini configs to MLME cfg:
1. CFG_QOS_WMM_INFRA_DIR_AC_VI_NAME
2. CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VI_NAME
3. CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VI_NAME
4. CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VI_NAME
5. CFG_QOS_WMM_INFRA_SBA_AC_VI_NAME
6. CFG_QOS_WMM_INFRA_UAPSD_VI_SRV_INTV_NAME
7. CFG_QOS_WMM_INFRA_UAPSD_VI_SUS_INTV_NAME
Introduce the basic infra APIs related to these configs
from mlme
Change-Id: I320f49b216659937dc7f708fdbb7849ae415e249
CRs-Fixed: 2327687
Correct the configuration check to enable/disable the Tx SU
beamformee setting in 20MHz mode operation.
Change-Id: I958d5319acf98931187304f2c6fe2a9aff5991b7
CRs-Fixed: 2343849
There are two cfg setting parameters defined for SU Tx beamformer
and improperly updated the cfg settings hence the Tx beamformer
capability advertised as unsupported always.
Remove the redundant setting for SU Tx beamformer and update the cfg
with correct values.
Change-Id: I422179ae87ab5c561f0356bcab4585fbdc53c0bd
CRs-Fixed: 2343090
Remove legacy cfg items definitions and related macros for the
converged CFG items.
Change-Id: I12944f50d68dafe989417dda777f29a6233c97a4
CRs-Fixed: 2340856
Remove the definition of following INI & CFG Items
for VHT caps which is common for HT and HE caps.
CFG_VHT_LDPC_CODING_CAP
CFG_VHT_SHORT_GI_80MHZ
CFG_VHT_SHORT_GI_160_AND_80_PLUS_80MHZ
CFG_VHT_TXSTBC
CFG_VHT_RXSTBC
CFG_VHT_RX_MCS_MAP
CFG_VHT_TX_MCS_MAP
CFG_VHT_BASIC_MCS_SET
Change-Id: I55390c3391a0be272c609030dae232d767111fcf
CRs-Fixed: 2333183
Wireless application needs to tune parameters per AC based.
Such as VI/VO queue use the different re-transmission attempts
while other queue keeps the default value. It helps to improve
the video/audio performance in noisy environment. this change
add the ability to config re-transmission attempts of non
aggregation QOS packets.
Change-Id: I95404302463275803e3feff3038f04c900b14705
CRs-Fixed: 2323555
LFR2 uses ft reassoc, whose process is different from general
connect.
1.ft reassoc, normal reassoc and assoc, all of 3 need deliver
event WLAN_VDEV_SM_EV_START to SM, but need different handler.
2.ft reassoc send vdev start when add bss, not switch channel.
Change-Id: Ieefbcf0a28867be3c8a86d9a912143857c54fe06
CRs-Fixed: 2334194
For STA interface, add support to send VDEV_UP command to firmware when
VDEV state is transitioning to VDEV_S_UP.
Change-Id: Ic8f4e8355381d915f4c1c7f6650950d7d12d9db3
CRs-Fixed: 2333297
VHT Part3: Add the basic infra for MLME CFG items and the APIs
to be used from other components for VHT.
Change-Id: I8cd30439d7ac3de7b550aa5042353cf30e04cbda
CRs-Fixed: 2322304
Create and send user configurable ini for max number of roam preauth
retries and roam preauth no-ack timeout to the firmware.
Change-Id: I66808b33f421f56cd7c007cdde1db19c8e7ca5f9
CRs-Fixed: 2279049
Add the following WMM AC VO ini configs to MLME cfg:
1. CFG_QOS_WMM_INFRA_DIR_AC_VO_NAME
2. CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VO_NAME
3. CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VO_NAME
4. CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VO_NAME
5. CFG_QOS_WMM_INFRA_SBA_AC_VO_NAME
6. CFG_QOS_WMM_INFRA_UAPSD_VO_SRV_INTV_NAME
7. CFG_QOS_WMM_INFRA_UAPSD_VO_SUS_INTV_NAME
Introduce the basic infra APIs related to these configs
from mlme.
Change-Id: I402ff46aad528d7c4bbaa794b6fba498439f8e97
CRs-Fixed: 2327048
Add the basic infra for MLME CFG items and the APIs to be used from
other components for VHT - Part-1.
Change-Id: Ie74bfd42ed3d34cc218f20ee3f9d81dc6af02172
CRs-Fixed: 2322300
