Add changes to use wsa883x for receiver with
low_noise mode settings.
Change-Id: Icfa43ebbdb1e366f365053535f541bee03751ca3
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Thermal framework is expected an error to be returned if the requested
cur_state exceed the max_state.
Change-Id: I1e0d8124a1aa6c0d755b35225207638aefdcb464
Signed-off-by: Junkai Cai <junkai@codeaurora.org>
Update central broadcast register control to enable bcl path.
Change-Id: Ibc05289d9cdd41e81369c6ef2547eceffa36d73a
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
When multi wsas are connected to wsa-macro and some registers
are written to wsa, swr broadcast mode is used. When closing
one wsa, it will also send the register write to the other wsa
and it should not get updated. The other wsa will be in bad
state.
Remove broadcast for wsa-macro to resolve this issue.
Change-Id: I4c788a213fdcd217861703a13d44c096fd9b632d
Signed-off-by: Meng Wang <mengw@codeaurora.org>
cooling of WSA/WSA2 is to reduce the digital gain.
the cooling callback should only be called when the WSA pointer
has not been initialized.
Also the adjusted volume of RX0 and RX1 need to be set separately.
Change-Id: I6aac0e7a3a3219e8b5c24d711a6c7773824827e9
Signed-off-by: Junkai Cai <junkai@codeaurora.org>
the dapm_mclk_enable flag has not been set back to false
when the actual mclk is disabled.
Change-Id: Ic04756b3dcd074887dd1e93f23cf31873abc1428
Signed-off-by: Junkai Cai <junkai@codeaurora.org>
The digital gain will be adjusted lower than what userspace set
during playback if the device temperature reach the threshold.
Whenever digital gain is changed from userspace, codec will check the cooling
state and adjust the gain.
Change-Id: I52df0f96cf20b90a9bdad70b9c117eed82145fb2
Signed-off-by: Junkai Cai <junkai@codeaurora.org>
Add wsa2 backend dai links only in platforms
which has 4 wsa speakers.
add 2 to the device index parsed from hardware device id
of wsa slave to match the dai names in the msm_dailink.h
Change-Id: Iffe43842123526f4925f9d5bcd8dff0317bac7a7
Signed-off-by: Junkai Cai <junkai@codeaurora.org>
During sound card register init call, if swr pdev
is not initialized yet respective soundwire port
config is not updated to soundwire controller device.
In macro drivers, update swr pdev into macro private
data prior to platform device add.
Change-Id: Ifa67471cfc7a10b102b573df6285e598bb0b5e5e
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Update ch_mask of WSA2 macro to return based on
4-channel DMA support.
Change-Id: Iea4800dc85bf6bf1d250dfca214c58925ea328ab
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
RX4/5 are added on bolero 2.5 and can be used for wsa1 macro.
Make this change to add RX4/5.
Change-Id: I4fa77fec3cbcb4d01718026cf648e5e7a171ddb2
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Remove bcl decode registers and add new central broadcast
decode registers.
Enable the new central broadcast (CB) block registers during usecase
start and request for bcl data inorder to receive current bcl events.
Change-Id: I4c626e5083328b4cfdb5c956695078985b5c54a5
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Update LPASS digital codec driver name for proper enumeration.
Change-Id: Ied6a3697a5e47c0695b6339ec7b4b4561ef6ccbd
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Update compander settings table to calculate based on
upper gain and lower gain.
Change-Id: Ib423f3c14c900c0df03bc8fcab2df0f62fb614f1
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
