Obsolete TWT functions are still called in driver. As part of
removal, Remove these functions and use component function.
Change-Id: I9f8b4186753ec9d446399be9e1cfc03a63a17391
CRs-Fixed: 3294868
Function mlme_vdev_create_send() was removed by the following patch:
qcacld-3.0: Send vdev create to fw from object create notification
Change-Id Ibba02f6b5885d7b3a62529ef51768f520395513e
However the prototype was not removed, so remove it now.
Change-Id: I45e20bc4cb8fb00486208711765625792312ce8b
CRs-Fixed: 3430397
The mlme_sap_set_twt_command_in_progress() prototype was added as part
of the following patch:
qcacld-3.0: Add support for SAP TWT teardown
Change-Id I108ea425e69e07ee8a3657ca5afcb436420b2626
However, there isn't an actual implementation of this function, so
remove the unused prototype.
Change-Id: If30d4e53b69c7747d60974c06a91795caffd19c0
CRs-Fixed: 3430387
Currently, on obss color collision detection driver sends bss color
change IE in beacon and updates the color switch count in IE in
every beacon until color switch count reaches 0.
If the wlan driver enters suspend during this updation of bss color
change IE in beacon, the bss color change is not completed until wlan
resumes. This will lead to delay in bss color change after bss color
collision is detected.
To fix this issue, acquire wakelock once obss color collision is
detected and release it once obss color change is completed. This fix
is similar to how CSA is handled currently in driver.
Change-Id: I9c3e7cfe16da116905121b044054c0987afbca09
CRs-Fixed: 3405919
As part of new requirement of 'SAP PS with TWT enabled',
add ini 'g_sap_ps_with_twt_enable' support in host
to enabled/disabled SAP power save with TWT enable.
Change-Id: Iea76f9cdef6f0753a6dfcebedc2aeab17d121faf
CRs-Fixed: 3421610
Add bool flag to mlme_vdev_disconnect_peers legacy callback.
This flag will be used by WIN. MCC should ignore this flag.
Change-Id: I693d1aeda1109a987311c1b87346960bed52309f
CRs-Fixed: 3403218
Handle mlme_vdev_reconfig_notify callback to get notification
after receive the first ML reconfig link removal IE.
Override the delete timer tbtt to 0 to fire the timer early
if timer is less than 1s. This is to avoid host delay of sending
to link inactive command to FW and FW receive deauth before host
inactive link command.
Change-Id: I7865b7942813fd7facf4daa8624c976166814311
CRs-Fixed: 3380147
Handle link removal for ML STA vdev:
Send force link command to target if MLO STA link number > 1.
Select other inactive link to active if possible.
Change-Id: I40567364ad240399caf6be6683b96d17f6a4aab0
CRs-Fixed: 3352849
Extend WMI_ROAM_STATS_EVENTID event information for
requirement of:
1.Roam trigger related information, include timestamp,
trigger reason, trigger condition, abort reason,
scan type, roam status and fail reason.
2.Roam scan related information, include scan channel
number, dwell type, max dwell time of each channel
and total scan time.
3.all types of roam related frame information, include
timestamp and successful or failed status for Preauth,
Reassoc, EAPOL-M1/M2/M3/M4.
Cache roam information in wlan driver, when qca vendor
cmd of QCA_NL80211_VENDOR_SUBCMD_ROAM_STATS get roam
information, driver send all the cached information to
user space.
change-Id: Ic5e1120b51c20c103100833b4296002c5939b021
CRs-Fixed: 3389269
Currently, if Channel change is required via DCS then ACS
is triggered to select the best available channel . In case of
XR SAP optimization, SAP can not come on 2 GHz and frequencies
that can be shared by current SAP frequency on same MAC are
removed from scan list. As result of which frequencies
5/6 GHz in case of DBS and 5 GHz low/5 GHz high + 6 GHz based
on which 5 GHz range is shared with 2 GHz will be disacrded from scan
list. In short Scan can not be triggered on freqeuncies of same MAC
on which SAP is up and can not come in MCC. So, if any other device
mode is up on 2 GHz on other MAC turning on SAP on other MAC can
cause MCC in case of SBS and DBS HW which is not preferred.
Fix is to start SAP on random 6 GHz channel when case CSA is required
due to DCS in case SAP can't come up on 2 GHz and scan can not be
triggered for same MAC on which SAP is enabled i.e ACS optimization
is enabled for XR SAP.
Change-Id: I0cb46a409e3ee04044f7a0b12addec464e87ef7d
CRs-Fixed: 3404097
Currently, if there is a legacy connection and a new STA
connection comes up with EMLSR capability, Host does not
advertise EML caps in assoc request. But there is no support
to enable EMLSR mode if the legacy connection goes away.
Thus, add support to handle this concurrency scenario as
follows
1) Host should advertise EML support capability in assoc
request.
2) After association is complete, force disable one of the
EMLSR links.
3) Once the legacy connection goes down, re-enable the
disabled link.
Change-Id: I5d9f37827e2a9f0571fa9733b4779668bd987f92
CRs-Fixed: 3363115
For bw higher than 20 MHz ACS request, such as 160 MHz,
weight calculation will combine the neighbor channel's
weight which maybe Non PSC channel, the previous setting of
combined weight to channel of lowest weight of neighbor channel.
That maybe Non PSC channel, that causes the final ACS result
is Non PSC channel, which is unexpected for standalone SAP.
Fix by set combined weight to PSC channel, so that PSC
channel will have a valid weight in final sorting with 5 GHz
or 2 GHz list.
Change-Id: Ic37d005af524f5ff2c8cb2c86647f02ced7c32d7
CRs-Fixed: 3394384
Add ini groam_info_stats_num used to control wlan driver
cache roam statistics information number.
Change-Id: I203257af37dcac76c6822ddfcc2e9dc723078a25
CRs-Fixed: 3393712
Add APIs to set/clear link removal flag on vdev object.
If link is removed, drop the disassoc or deauth frame for
the vdev.
If disconnect start is indicated, stop the reconfig timer.
Clear the link removal flag on disconnect complete.
Change-Id: I729621aec36b82de6e88970675b020a2c5721e68
CRs-Fixed: 3352779
Currently if host enable AFC in WMI INIT CMD, target will trigger AFC
request if current country has AP SP reg rules. We have changed regdb
on specific SP to enable AFC test, to not affect other SP which shares
regdb and FW, introduce INI to control AFC enable/disable for
flexibility.
And because currently no country support AP SP reg rule per spec,
so disable AFC by default.
Change-Id: I0e5eb2dac0a8df01635437fe8353ca5431ae5d2a
CRs-Fixed: 3393896
Some legacy STA doesn't recognize the EXT CAP IE with
length greater than 8bytes. Therefore, these STA cannot
associate with hotspot broadcasting newer capabilities
in the extended IE.
To fix this, add an ini which would override the beacon
protection config in host driver.
Based on this ini, the beacon protection would be disabled
only for non-6 GHz and non-11be SAP profiles, as beacon
protection is mandatory in 6 GHz and 11be cases.
Change-Id: I672b707f6955fa31938aebba5e25461dd40cee4e
CRs-Fixed: 3378974
Currently host drops an AP from scan list if host country is set to
US and AP country is non-US. This implementation violates our
standard regulatory scan policy.
To address this issue, introduce a new INI to differentiate
between our standard regulatory policy with others.
Change-Id: Ie6bd2d1925048aef427136b34d00d361955f40b2
CRs-Fixed: 3377242
The wpa_supplicant disables the BTM cap in extcap IE whenever
the MBO AP is not PMF capable, or if the btm_disable conf is set.
In current host driver design, the BTM offload is disabled only for
the MBO+non-PMF case. Therefore, add change to disable the btm offload
config if the BTM CAP is not present in the (re)assoc request as this
is determined based on intersection of peer and self cap.
Change-Id: I2fdc1010bccf5ce23f4ab2177aed6c374f7a510f
CRs-Fixed: 3369096
This is applicable only when the roaming happens from 2.4 GHz/5 GHz
to 6 GHz AP.
The value is used to check if the 6 GHz AP to which we are roaming
(from 2.4 GHz/ 5 GHz) is better than current AP in terms of RSSI.
This checking is disabled if the value is set to zero.
Change-Id: I77f1183e1fd704dfa153841e669a20c9e75d0fe7
CRs-Fixed: 3353346
In WoW mode, roam auth event may comes before roam start event, so CM
isn't in ROAMING state at that time, can't assume ROAMING state.
Change-Id: Ibf868db1ca0f9863d4beae4c83227cf04fe55adb
CRs-Fixed: 3357115
Roam sync may get aborted on link vdev due to multiple reasons.
Link scan entry being not available at host is one such case.
del_sta response of BSS gets dropped due to stale link-RSO state
and results in disconnect timeout.
Reset the RSO state machine of link vdev when roaming is aborted
to allow cleanup the vdev in next disconnect.
Change-Id: Ie584c5b7ccae989cf2ce64e85da26d1b3526f1e0
CRs-Fixed: 3352543
Move Action OUI INI config to component.
Add ucfg API to load/parse the configuration.
Change-Id: Ibaab5428bc575394b9a5b464639d24f80f042e93
CRs-Fixed: 3310697
Add edca_param_type ini to configure edca or pifs param for
LL SAP.
If edca_param_type is 0 then set edca param or
if edca_param_type is 1 then set pifs param.
Based on this ini, host configures either edca or pifs param
and send it to firmware and earbud via OTA frames.
Change-Id: I46a5efea4f516b145d04d8b8ad79c5d47ceb7f89
CRs-Fixed: 3344875
Currently probe request is sent every 200ms during join timeout
this can lead to 16+ probe req, send during join time.
Change logic to send max 5 probe req during join time,
if candidate freq can lead to MCC concurrency scenario.
Change-Id: I7956771e2cf6724754f59c6db5b07fb45426ae41
CRs-Fixed: 3338329
Add 4 static cfg items for AFC feature:
CFG_AFC_REG_NO_ACTION, CFG_6GHZ_SP_POWER_MODE_SUPP,
CFG_AFC_TIMER_CHECK_DIS, CFG_AFC_REQ_ID_CHECK_DIS.
Add APIs to pass these settings to psoc private of regulatory
component.
Change-Id: I61114fb7bf7d84f939265629bde78813b6295e39
CRs-Fixed: 3153987
In 11be capable configuration, for connection attempt
to MLO AP from non-MLO type vdev, downgrade to 11ax
mode association for that vdev.
User can still connect in ML mode from MLO type vdev.
Change-Id: I1e7cf940a778a20f2f4d5d24283ffb6aae52781b
CRs-Fixed: 3312163
Currently host driver does not support dynamic NSS update for
SAP. Based on new requirement update NSS for SAP.
To achieve this requirement, add a logic to update the NSS and
restart the SAP with the updated NSS based on the ini.
Change-Id: Ie770b1103ba4050c48cd4ba3674a5e0d89c86fdf
CRs-Fixed: 3307308
In case of ML SAP, userspace needs assoc resp IE to get all
the ML link info.
So, Add support to save assoc_resp ie pointer in peer common object
which will send to userspace.
Change-Id: If19857ecce62092b1aa4e7fef17c09e819822f5f
CRs-Fixed: 3325938
Add sr_enable_mode ini to check SR(Spatial Reuse)
can be enabled for non-STA mode or not. If SR
can't be enabled for non-STA mode and concurrency
is not allowed then don't allow any SR operation.
Change-Id: I876882c48c54f216bc1d0efa4dccce63f2a2e63c
CRs-Fixed: 3311374
This fixes a scheduler_msg CFI failure for function
mlme_wma_vdev_detach_post_cb().
Change-Id: I6271bf9de8d800aac8a804d1daf646063347a71c
CRs-Fixed: 3316558
Userspace provide below vendor attribute for low latency sap
concurrency
a. QCA_WLAN_VENDOR_ATTR_CONCURRENT_POLICY_AP_CONFIG
This userspace uses the below value defined in enum
qca_wlan_concurrent_ap_policy_config to specify concurrency
policy
a. QCA_WLAN_CONCURRENT_AP_POLICY_UNSPECIFIED = 0,
b. QCA_WLAN_CONCURRENT_AP_POLICY_GAMING_AUDIO = 1,
c. QCA_WLAN_CONCURRENT_AP_POLICY_LOSSLESS_AUDIO_STREAMING = 2,
Convert this above enum value in host to use in concurrency
scenario.
Change-Id: Ibab06f528fd99d8c421376bd02e4c748e9556b70
CRs-Fixed: 3302418
Control Preamble Puncturing feature via INI "he_rx_pream_punc"
and UL MU-MIMO feature via INI "enable_ul_mimo".
Change-Id: Ib4d6fd10c9e4f46c1baa5070f94d8dddd4978757
CRs-Fixed: 3305742
To avoid wma_vdev_detach_callback() is run under interrupt
context, post wma_vdev_detach_callback() to driver scheduler
when vdev delete is failed to send to FW.
Change-Id: I87a603de326789ac43dac34de31eb564f13d11f5
CRs-Fixed: 3308547
Build failed once WLAN_TRACE_HIDE_MAC_ADDR is enabled,
due to 'error: type mismatch in conditional expression'.
To fix it, correct the parameter for QDF_MAC_ADDR_REF.
Change-Id: Ifd89b02ab5fb2e3b59291c303ad93b691616dc57
CRs-Fixed: 3308193
Add new ini "enable_responder_11az_support" to enable/disable
R-STA 11az support.
Change-Id: If99f19eb88a6db31364f010db0f257ece45e6527
CRs-Fixed: 3295310
When roam from SAE legacy to SAE MLO, pre-auth TA is MLD address,
while peer AP expects link address, pre-auth fails.
Parse transmit address field from firmware roam_preauth_start_event and
include it when send NL80211_EXTERNAL_AUTH_START to wpa supplicant for
SAE roaming cases.
If transmit address is all zeros, wpa_supplicant will not do ML sae
auth, use MLD address as TA.
If transmit address is not zeros, wpa_supplicant will do ML sae auth,
use 'transmit address' as TA.
Since self peer is created with mld address, when roam from legacy to
MLO, try to get peer by mld address during pre-auth tx since bss peer
absent, or TX fails for no peer.
Change-Id: I99ed846e94165bfe01e1d1e8c620f035751c7056
CRs-Fixed: 3289987
This change fixes the use of uninitialized variable and dereference of
free pointer issue in host driver.
Change-Id: I88359cd383d15f9baa73bc7c3ce9d5fccee2a41e
CRs-Fixed: 3295234
Currently, in host drivers, compilation fails for some TWT API when
definition is not available for either of 11AX feature flag
(WLAN_FEATURE_11AX) or TWT feature flag (WLAN_SUPPORT_TWT).
Add support for the dummy TWT API to resolve the compilation error
when 11AX and TWT feature flags and are not defined.
Change-Id: I3fa96393d5cdac9e5222b3978108601e1a651143
CRs-Fixed: 3292454
Add new ini "enable_responder_secure_ltf_support" for R-STA
secure LTF support. Enable this ini for R-STA to advertise
secure LTF support in extended capabilities & RSNXE.
Change-Id: I474b06c52c47b5a54dc827031bf9ff7c0d2f7d05
CRs-Fixed: 3283083
Disable 11a support on 6 GHz band and change default rate of 6 GHz
frequency band by using WMI_PDEV_PARAM_DEFAULT_6GHZ_RATE.
Change-Id: I2db2dd54c03cf71e1b697796fa3dc58d2646a8b5
CRs-Fixed: 3251997
In STA+SAP concurrency, if the STA is connected in indoor
power, and if the country/channel supports VLP, then bringup
the SAP in VLP. Move the STA to VLP as well.
Restore the power of the STA, when the SAP is disconnected.
Add changes to:
a) Decide the power type for the concurrency during start bss,
stop bss, change channel request calls of the SAP interface.
b) Allow the 6 GHz SCC channel in ACS computation if the channel
supports VLP power or if the channel is indoor and enabled.
Change-Id: I151e2e3e8910a406bb5c1526f4f01715854d173f
CRs-Fixed: 3268100
In case of single link mlo roaming, set both dp peer flags
is_first_link and is_primary_link to 1, then datapath will
create MLD peer.
Change-Id: I935c42b2c3eaa558028d45bdbf502007723f656c
CRs-Fixed: 3271224
SAE authentication frames during roaming should be cached and
printed after roam scan done print. This support is not present
in diag logging.
Enable SAE auth frame caching for diag logging.
Change-Id: I205bd2fd1c91253d1e6aaf3361857baf67ccd6fd
CRs-Fixed: 3254216
Prensently for initial scan and roam passive scan dwell time,
the same ini CFG_PASSIVE_MAX_CHANNEL_TIME is used. This will
cause initial scan to have the roam passive scan value.
Decouple passive scan and roam passive scan ini parameter by
adding new ini param for roaming
Change-Id: I4b37c8faa26c971f173e8c8179e505ea4c69c27e
CRs-Fixed: 3268789
