In force teardown case disable the interrupts before
going down. As target may be still active, we may
still continue to receive traffic. Disabling
interrupts to nsure we dont process interrupts while
cleaning up partner SOC
Change-Id: I7092d398c039302234206cb72f7453b6dc0cbcb7
CRs-Fixed: 3332961
Add MAC ID to which the Spatial Reuse stats is requested from.
Pass this MAC ID to FW to get the respective Spatial Reuse stats.
Change-Id: Ief2434bf1f2fc82d9339ee38933effbd580088af
CRs-Fixed: 3328686
Add support to read TSF2 and TQM scratch regitser in the HAL layer
for WKK v1 and v2 board.
Change-Id: I0ef5e8cf4e06c0b5c98169252a81f70989285d2d
CRs-Fixed: 3321782
As part of mac address filtering feature for scan radio in special
vap mode, on addition of first NAC entry or deletion of last NAC entry
the corresponding monitor filter needs to be set or reset
Add change to support ops callback function required to set or reset
monitor filter settings are runtime.
Change-Id: I916c0b246bb180363f1a181ef49618af763b261d
CRs-Fixed: 3317409
Add support for:-
1. PPE VP entry attach and detach.
2. Per VAP PRI2TID Support
3. Dump the PPE VP HW entries.
4. Add tx completion handling for ppeds descriptors
Change-Id: I2a6d0be5bb556663a39a24d17b703877f3b5ad00
CRs-Fixed: 3276981
In SAP due to intrabss forwarding, Tx ring update is going through
when WOW enable command has been sent to FW. This results in crash.
To fix this, do not update HP when apps suspend is in progress.
Change-Id: Id4176224563bdd759828397fa1cd23de1598192e
CRs-Fixed: 3294407
Debug framework for tracking the SMMU mapping and unmapping of
skb buffer when IPA offload is enable and IPA_SMMU_NBUF_TRACKER
is define.
CRs-Fixed: 3255423
change-Id: I8966097945b33cb866f4642b98b3d1a4beabfad7
Add cdp function to get the peer extended rate and link stats.
This change is to support user level command to flush mld/link
peer extended link and rate stats.
cfg80211tool wifiX get_peer_extd_rate_link_stats <mac_addr>
Change-Id: I20cd2b38b242008b95aedc5f9914088a149093dd
CRs-Fixed: 3278042
When AP vap disconnect aburputly or by doing channel switch then for WDS
node, client disconnect event is not sent to IPA driver, hence IPA is
not aware of any new wds client coming behind that peer as the previous
delete event is not handled properly
Fix is to send wds client disconnect event when ast entry are flushed.
CRs-Fixed: 3271481
Change-Id: Id507f543c8f4cb8f69e26ba6ca3a23787af21ed7
This is a new FAST TX API which avoids various checks.
This API will be called when SFE tags a pkt as fast_forwarded
and vap's fast_tx flag is set.
avoid additional re-checks in the wifi TX function
CRs-Fixed: 3218650
Change-Id: Iba17ede59652a1ff2af553f57de21dc58946298e
Use WLAN_CONFIG_TX_DELAY to enable HW Tx delay for both
SAWF and non-SAWF stats.
Change-Id: I6db7d386c0e3654f53398dcba1db7c5568544b0c
CRs-Fixed: 3262425
Call UMAC reset initialization API from soc_attach_target().
FW exposes a service bit for this feature, use that to conditionally
enable this feature. Also, add default log levels for this feature.
CRs-Fixed: 3253464
Change-Id: Ia7c9cf07a7ab7b000ebe452ab074a82173b70129
Add changes to support flushing of MLO peers only.
This is required to support the mode-1 behavior of target
recovery feature, where we delete MLO peers and retain
legacy peers across SOCs which are not crashed.
CRs-Fixed: 3243549
Change-Id: I5ae326bfffd1267768c83fd7f60fa1343ef305fe
Currently, if mld and link peer has the same mac
address, the peer cannot distinguished with
just the mac address as the search argument.
Hence to support same mld/link peer mac address,
cdp_peer APIs that uses both link and mld peers,
are also given peer_type info. This helps
to perform the operations on the correct peer.
Change-Id: If646755facc8f9a4d9fed2f31c5cc6618fa9a952
CRs-Fixed: 3043428
On receiving the peer unmap event the ops
is called without the mac address of the
peer for which peer unmap is received.
Add mac address of the peer for which peer
unmap is received.
Change-Id: I9026433089963818d5a227a0660866ff504dea84
CRs-Fixed: 3238626
Set function pointer for SCS peer lookup and rule handler.
Add a new module id for SCS.
SCS database maintained in dp_peer structure is redundant as
same info is maintained in control peer. Therefore remove
SCS database from dp_peer structure and also remove APIs
which access/update this database.
Change-Id: I951f12de487a4be3ae169d1e309352e4e5031fc9
CRs-Fixed: 3226693
To avoid unmeaningful rate fluctuation, when report
rx linkspeed to upper layer, exclude special frames:
arp/ssdp/dhcp/eapol/ipv6 NA/NS/DHCPV6 in low rate.
Change-Id: I4bc49a808a02b4bc8c687f70690922045d65e739
CRs-Fixed: 3198484
Add function pointer declaration for SCS peer lookup and rule
match and also define cdp call for the same.
Change-Id: I4329b746a12f019a077652d02625b76c7f5fa21f
CRs-Fixed: 3226475
To support WDS feature in IPA driver, WLAN needs
to update the ast entry for any new rx packet, and for
end-nodes connected via repeater to root.
CRs-Fixed: 3226348
Change-Id: I7383b12f18e7c70ec06499d66130667eca033131
Add extra actions for tx peer filtering. This actions are used
to indicate to FW for the first peer addition and the last peer
deletion. This will be used by FW to set and clear peer filtering
related registers.
Change-Id: I1488146f54f3aab82651f4a27823a9b977d7b307
CRs-Fixed: 3237958
Add delta_tqm, delta_tsf2 and mlo timestamp offset for BE.
These offsets are used to calculate hardware Tx completion delay.
delta_tsf2 and delta_tqm are updated during init. mlo timestamp
offset is updated whenever target sends the update event.
Also, adding CDP ops to set the offsets.
Change-Id: I55665982798c3a795481fa96c023bb851ea17476
CRs-Fixed: 3220906
The telemetry agent on certain intervals needs to pull the
SAWF stats from the driver.
Add CDP ops to pull the SAWF stats from the driver.
CRs-Fixed: 3210834
Change-Id: Ibc27059ff13b33acc4e71d3174a0415756dcfc5e
Since more than one components depend on reap timer of
monitor status ring, add bitmap to record the trigger
sources of the timer and refine the APIs/calling functions
accordingly.
With this change:
When a new start request comes, if the source is
CDP_MON_REAP_SOURCE_ANY, skip bit set, and start timer
if any bit has been set in the bitmap; while for the
other sources, set the bit and start timer if the bitmap
is empty before that.
When a new stop request comes, if the source is
CDP_MON_REAP_SOURCE_ANY, skip bit clear, and stop timer
if any bit has been set in the bitmap; while for the
other sources, clear the bit and stop timer if the bitmap
is empty after that.
Change-Id: Idaa7837c4b93b247ff2236aa5072d309fa9548c2
CRs-Fixed: 3190347
This enables the option to configure when a peer's
TID queue needs to be flushed. This is required to
discard packets that are no longer useful to the application.
Change-Id: I558debff043fc0c8038e5f5f2c815b64c90e1561
CRs-Fixed: 3130422
Use CONFIG_SAWF macro to prevent linking dp_set_delta_tsf in
low memory profile.
Change-Id: I07b75f893e6d043839225d9b7288823b6ef2f823
CRs-Fixed: 3211426
For telemetry agent, some more statistic support is required.
Hence, add support for telemetry agent required stats.
Change-Id: Ieb2210a4a5dfe6fa0a0dd46a85f2d9ae483bb746
CRs-Fixed: 3210797
Add WMI command for tx peer filtering. This command is needed to send
the mac address to FW for which tx monitor peer filtering is needed
to be done.
Change-Id: Ia141fba81ba240b7f4ca015eb9251e3485294bb6
CRs-Fixed: 3199493
Add cdp api to get accumulated pdev tid stats along with per tid
total tid rx and tx stats.
Change-Id: I7862c4265f199d0588d8865c5ed97e06010dd79f
CRs-Fixed: 3207499
Define a new function to calculate HW delay so that same logic
can be used to calculate delay by other modules.
Change-Id: Id3740bcaa2cd558b89ab02d8e88d5947eb5997b1
CRs-Fixed: 3198305
In VoIP cases, no or minimal packet drop is expected during
roaming. Currently, data packets are dropped in host if they
are received after roam sync indication from firmware and before
peer map indication is received due to invalid peer.
This change allows rx UDP data packets during roaming before
peer map indication is received from FW if peer's auth_status
received in roam_sync_indication from FW is authorised.
Change-Id: Ic518b7cd0aef48a2b0f8c923a2e20838b07f3d1f
CRs-Fixed: 3168603
In QCN9224, when 11v DMS feature is enabled use
FW based DMS support instead of SW based WAR.
Change-Id: Icc5b9740f71bd00862e06950e4fe49c663d513b4
CRs-Fixed: 3182547
Currently, in case where AP advertizes BA window size
which is different than our max supported BA window size,
the HW gets configured for BA window size advertized by
the AP, whereas the ADDBA response indicates the window
size of the STA, which is less than the AP.
This mismatch leads to the BA bitmap to be incorrect.
Fix this by exposing an API from datapath for the update
of the final BA window size which is populated in the
ADDBA response.
Change-Id: I81a039f47a775990b426e9aca1daaaa9bdb6e88f
CRs-Fixed: 3187941
After enable and disable of both radio, If second radio is enabled
then the instance_id from wlan driver is passed wrongly to IPA driver
which is in leading to initializion of first radio on IPA driver side.
Fix is to take the instace id based on psoc id and set the prod and cons
pipes based on instance_id instead of IPA given handle.
Change-Id: I26f4f3fbd23284e79a380d212ad07aceac50f053
CRs-Fixed: 3179306
RSSI calibration parameters are received as part
of WMI event from FW, update these parameters to
monitor pdev via CDP interface.
Change-Id: I5060795918571763ad467aae93729040fbca96a1
CRs-Fixed: 3147897
With new configuration changes for enable_peer_extended stats, update
code to peer_extended_stats naming for clean codebase.
Change-Id: I97a7ee331042232098382683fefebd05e6b099c3
CRs-Fixed: 3149920
