The event WMI_ROAM_STATS_EVENTID is received after
every roam, once the roam synch complete is sent by the host.
This event contains details regarding the btm response.
This helps to debug the scenario when roam failure happen.
Print the info received related to roam scan type & roam status
info into kmsg.
Change-Id: Idd688eb4d1e699573fa1e243873c30ffdc5bf96f
CRs-Fixed: 2794555
Move ini CFG_VENDOR_ROAM_SCORE_ALGORITHM from qcacld-3.0 to qcacmn part.
from qcacld-3.0: mac_ctx->mlme_cfg->roam_scoring
to qcacmn: mlme_psoc_obj->psoc_cfg.score_config.
Change-Id: I318f0d516ce699c061f268116e1cbf79fcc9e23a
CRs-Fixed: 2806090
Move the logic to get HT and VHT caps in LIM from CSR also store
VHT and HT caps in vdev mlme instead of csr session.
Change-Id: I29b8e836a79a4a9eda5088c0eb2e0bf48d616de2
CRs-Fixed: 2807209
INI he_twt_requestor and he_twt_responder should be able to disable/enable
twt requestor and twt responder.
Make them work.
Change-Id: I5e091a2f04cca1817f1a2db6358f141c2eaf103d
CRs-Fixed: 2798800
Host is not enabling WTC_BTM roam trigger via
roam_enable trigger command
(WMI_ROAM_ENABLE_DISABLE_TRIGGER_REASON_CMDID). Because
of this roam scan is not triggered and BTM response is
not sent to AP.
Fix is to enable WTC BTM by default
Change-Id: Ie33f8a298818955c886094d6f703b9603ab5b00e
CRs-Fixed: 2795665
To discard 5G candidates based on RSSI threshold, Introduce
a new INI "min_rssi_for_2g_to_5g_roam" to configure the RSSI
for High RSSI Trigger.
Min: -120
Max: 0
Default: -70
Change-Id: If4545296ef1b53d18b8ae4abf12d450f5e690240
CRs-Fixed: 2789017
Currently, QCA_SETBAND_AUTO is backwards compatible, so it is set
to include only 2G and 5G bands. Update this to include 6G bands
as well. Also update the band capability INI to have the default
value 0 include 6G bands.
Change-Id: I98067c18e939ff4c1e7b1e778b020b44409b5b34
CRs-fixed: 2799883
Change the default value of in CFG_REPORT_MAX_LINK_SPEED
to CFG_STATS_LINK_SPEED_REPORT_ACTUAL instead of
CFG_STATS_LINK_SPEED_REPORT_MAX_SCALED so that
gReportMaxLinkSpeed uses the default value as zero which
was previously 2.
Change-Id: I459c807b1738e21a28c5b51e2eeb6a4bccb78662
CRs-Fixed: 2787888
Add support to handle the nl80211 attribute -
QCA_ATTR_ROAM_CONTROL_TRIGGERS_SCAN_SCHEME. Send RSO update to
firmware if roam scan scheme value is received via the nl80211
attribute QCA_ATTR_ROAM_CONTROL_TRIGGERS_SCAN_SCHEME over the
QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD subcommand.
Change-Id: If21281245097648380990b9218a722691279f598
CRs-Fixed: 2785256
The bit 5, 4, 3 are used differently in case of solicited and
unsolicited btm request. Update the description of the ini
param to provide clarity on the usage of these bits.
Change-Id: Ic9a596710da6b4692d578206bbd783f784a230fb
CRs-Fixed: 2787597
In OWE transition mode, the AP advertises one Hidden SSID and one
normal ssid and the OWE capable STA connects to the OWE supported
hidden SSID. When connecting to the hidden SSID, if the AP sends
beacon for the unicast probe request sent by driver before
anouncing join success, then the beacon NULL ssid gets updated to
the kernel. Then after successful association, while indicating
the connection successs to the kernel, the current bss is not
filled as wlan_cfg80211_get_bss() is called with the actual ssid
and not the NULL ssid.
Due to this when supplicant sends install key command for this
bss, kernel returns error and set_key always fails.
Wait for the probe response from the AP for the unicast probe
request sent before announcing join success and drop the beacon
received from the AP so that the driver
fills the proper ssid to the kernel bss entry and same ssid gets
used in association completion handler.
Change-Id: Icded0af5d45d3281ab4304bf166bdc318aa7a942
CRs-Fixed: 2782618
For STA+P2P GO case, DUT sets operational rates when connecting to AP
as STA, and overwrites it when DUT forming P2P connection as P2P GO.
So, add this change to save operational rates to vdev mlme legacy
object, and avoid to overwrite for other inferfaces.
Change-Id: I2bfbecbc9bc50b8943b1e3de516782e70b125ce2
CRs-Fixed: 2773943
Add ini he_mcs_12_13_support which will be used to enable
or disable 4K QAM MCS rates.
This ini can be used to set. MCS 12 and 13 for 2.4Ghz and
5Ghz. First 16 bits(0-15) is for 2.4ghz and next 16 bits
is for 5Ghz. Of 16 bits the higher, first 8 bits represent
BW less than or equal 80Mhz (<= 80Mhz) and higher 8 bits
represent BW greater than 80Mhz (> 80Mhz). nth bit in octet
represents support for nth NSS [n=1:8].
Def value is 0xFFFFFFFF which enable MCS 12 and 13 for all
NSS and BW.
Also, enable 4K QAM MCS only when this ini is enabled and
firmware also supports it.
Change-Id: I8375203735d8b07ef4ff86be2213da127be4e556
CRs-Fixed: 2762230
Reduce default value of gMaxLIModulatedDTIM from 10 to 5
to shorten the listen interval. It provides better
connectivity when AP has a large DTIM Period or
Beacon Interval.
Also, move the ini definition to sta header file from
sap header file.
Change-Id: I9661c6fc623949cf8b260043e8da7448b496d57f
CRs-Fixed: 2780070
Currently, gRoamBeaconRssiWeight is not used in HOST or
FW.
Remove unused roam ini param gRoamBeaconRssiWeight.
Change-Id: Ida6ddb8ca5805f819c4d3f7e6ed96c705fa6594f
CRs-Fixed: 2767533
Pass rx data rssi triggers and rx time to firmware.
Add log in wmi to narrow down host and firmware issue.
Change-Id: I255e02ab8f2c88a29619a49d9c2055bdaa75642a
CRs-Fixed: 2768053
FW triggers roaming based on the RSSI score of AP(s) available
after background scan. Currently, the host does not configure
the value of bg_rssi_threshold RSSI. This results in ping-pong
roaming after background scan, even though candidate AP
RSSI is not better than 5dbm than connected AP.
Fix is to configure the value of bg_rssi_threshold via new
INI "bg_rssi_threshold" and configuring default value of
INI as 5dB.
Min: 0
Max: 100
Default: 5
Change-Id: Ib710e294c8b33ff4903d41453e3b55f02daf53ae
CRs-Fixed: 2763962
SAE Public Key (SAE-PK) authentication is an extension of SAE. Host adds
support for SAE-PK APs roam score which host uses to select AP for initial
connection and roaming.
Change-Id: Id8c420950bb8c1d11db5a26aa860e280bcb672d1
CRs-Fixed: 2769372
Currently, the APIs related to setting the preferred channel list is
in the SME module. Move these APIs to the policy manager so they can
be accessed from non-legacy modules.
Change-Id: Icc487dd2a0014e59db9c2df729b875f58e3e975e
CRs-fixed: 2766863
3 ini:
roam_data_rssi_threshold_triggers
roam_data_rssi_threshold
rx_data_inactivity_time
If there's rx activity during latest rx_data_inactivity_time
and avg of data_rssi is better than roam_data_rssi_threshold, then
suppress roaming triggered by roam_data_rssi_threshold_triggers: low
RSSI or bg scan.
Change-Id: I5b41c4119e61392b50e52ab8ccb8650e5758f3b3
CRs-Fixed: 2768053
Set default value of INI enable_subfee_vendor_vhtie to 1
to enable SU Bformee in vendor VHTIE by default.
Change-Id: I8a916495dd5c6ddfe78840dc6f35976fbdbbf8ba
CRs-Fixed: 2769257
This is a change for typo about LFR configuration. It uses ini -
"mawc_roam_ap_rssi_threshold", the correct is
"mawc_roam_rssi_high_adjust".
Change-Id: I7e29287b84559f58f13d191d6288534196b894da
CRs-Fixed: 2768752
Currently INI: gFirstScanBucketThreshold is not used
while LFR2/LFR3 roaming.
Remove unused INI gFirstScanBucketThreshold
Change-Id: Ifa909fc57d3ac3da696369fcffc390826f393b44
CRs-Fixed: 2767372
Add changes to send roam scan mode over RSO start/stop/update_cfg
from connection manager. Update the roaming params and roam scan
params to new structure.
Refine send_roam_scan_offload_mode_cmd_tlv().
Change-Id: I6adce2e8a24ece93a079032d0e66760393fcdccd
CRs-Fixed: 2766023
Increase max sae auth frame retry count to 3 since total SAE auth
timeout is 5s.
Change-Id: I5902cc3411f713eaeed5ef7754fe7fe8e590b459
CRs-Fixed: 2765211
In some instances, AP does not respond to probe req
causing join timeout at STA and no connection.
To solve this,send multiple probe requests(every 200ms)
to AP until join failure timeout(1 sec) expiry,
if single bssid case retry same bss again
(configurable via ini, max allowed tries 2).
Change-Id: I7a7eeedcc24db1a74cd186ff957c638a39cdea6d
CRs-Fixed: 2763815
Currently the driver enables the SRD channels
support for both P2P_GO and SAP if the SRD master
mode is enabled.
Have individual ini values to enable/disable
the SRD channel for each op-mode as required.
Change-Id: If6e66996ed19dacbde7f71a6702f378a7e9a273c
CRs-Fixed: 2748446
The ini ratemask_type and ratemask_set can be used to limit
the maximum phy rate. The ratemask_type is used to select
the phy mode and the ratemask_set to select desired NSS and MCS.
It can be used to optimize link performance.
Change-Id: Ia5c9f3a80eb93710bdcf53dabc4a45e554753b01
CRs-Fixed: 2758859
Add user configuration support to configure dot11 modes for
different vdev types.
Change-Id: I338d9d76f000195d1798bbc8b3b7ff1fb33ee305
CRs-Fixed: 2760240
If join fail reason is timeout, retry sending join req
after timer expiry, timer value can be configured
via join_failure_retry_interval.
Change-Id: If90071b3f6d7f48936db6f7088c3c1547e48b294
CRs-Fixed: 2760236
RRM 11k feature is enabled or disabled based on the
rrm_enabled flag. rrm_enabled is filled from the gRrmEnabled ini.
Change the default value of gRrmEnabled ini to 1.
Change-Id: Ie2a95293c3225abc667563fcc9eed8440e46727f
CRs-Fixed: 2754534
When sta_sap_scc_on_dfs_chan = 0, SAP is not allowed to SCC
with STA on DFS channel. Check the SAP target channel DFS flag
considering the target channel bandwidth.
Change-Id: I321c1055574477fe39ca8569f24a4040c8dc1904
CRs-Fixed: 2756518
Add changes to define structure to hold the WMI_ROAM_SCAN_MODE
command related parameters.
Also added minor cleanup changes.
Change-Id: I24ef18e05de8dd05ee437e440651ea9ab0731e46
CRs-Fixed: 2758316
Enable RX LDPC capability by default in the
driver sinc the ini gEnableRXLDPC is not present
in the WCNSS cfg ini file.
Change-Id: I826dca94e0db18713b0d87581da07eeefbfc80d4
CRs-Fixed: 2748730
Add support to retry the deauth frame if the Tx is not success if
user configured the retry count.
Change-Id: Id128b4a70a276ee86270372ff7954e40bde8123c
CRs-Fixed: 2754305
In roam trigger print the driver doesn't include the current
RSSI threshold info.
Add the current rssi threshold value at which roaming was
triggerd in roam trigger logging.
Also refine the candidate AP blacklisting related prints.
Change-Id: I6d39851278081a728b74e036c22e8d302d7b7b4c
CRs-Fixed: 2752998
Use ROAM_11KV_CTRL WMI vdev command to enable/disable the roaming
functionality in FW.
Change-Id: If3bb344ec7058d4149d0064975d7c91f213fd105
CRs-Fixed: 2727671
Host sends the WLAN_MSG_WLAN_STATUS_IND to WiFi Location Service(WLS) via
cnss daemon which includes supported channels. WLS service is yet not 6GHz
capable. Hence to limit the 2.4GHz/5GHz channels only in
WLAN_MSG_WLAN_STATUS_IND introduce new INI "wls_6ghz_capable".
Change-Id: I77b284d2025601fec72aa35d430f18865f15f247
CRs-Fixed: 2748489
CLD driver specific time sync feature is no longer used since
core BSP provides more accurate time sync over QMI and hence
disable CLD driver specific time sync feature to avoid periodic
wake ups.
Change-Id: Ic2790e7cdb6cf56f874fb56cda246777bc34d2e3
CRs-Fixed: 2715021
Print BTM BSS termination timeout value and BTM MBO assoc
retry timeout value coming from FW through
wmi_roam_trigger_reason_tlv_param tlv.
Print Blacklist reason, Source of adding AP to BL, timestamp
which indicates the time when AP added to blacklist and
Original timeout value in milliseconds when AP added to BL
coming from FW through wmi_roam_ap_info_tlv_param.
Change-Id: Iea5b8c136f83841d679b9ad06721bb0c9349b46a
CRs-Fixed: 2744250
Currently driver sets the NOL state of the channels to false
on every regulatory updated, which indicates the channel is
not in NOL. Which may lead to some issues where the channel
is actually in NOL but host treats it as non-NOL channel.
Ideally NOL list should be maintained throughout the driver
lifetime and across the regulatory changes.
To address this issue add a logic to not update the NOL state
of the channels whenever the regulatory update is received.
CRs-Fixed: 2744916
Change-Id: If96b22ab29a60a2aa752bbf01aaae46fc37362eb
Change the usage of cfg parameters from Internal/External
to External in .h description for mlme, p2p, and
policy manager files.
External means that both internal teams and external
customers can modify the parameters.
Change-Id: Ic1e68d5a90be2c898ce66aa18e8d91f16561b408
CRs-Fixed: 2712773
