In wmi_buf_alloc() function, pass function name and
line number of caller and log the same in case of failure,
this approach helps to remove error logs in caller function
there by reducing text segment.
Also add wmi_nofl_* macros.
Change-Id: Ib1ac8bf2bbcefa7f0015aff2733d3dc4773b185d
CRs-Fixed: 2281983
P2P Listen offload is not a requirement for Genoa, hence featurize
P2P listen offload code to save memory foot-print for Genoa.
Change-Id: I3c32b4ee2b37421e49acee4bd20d36e7a8a3bf77
CRs-Fixed: 2304555
Add new WMI command to support WMM based ATF configuration.
The new WMI command sends the Access category ID and the
corresponding airtime allocation to the firmware.
Change-Id: I7a5fafa6190d779d0fef8982b7b781af54656b19
CRs-Fixed: 2293193
Change "qcacmn: Add revised extscan start hotlist monitor API" (Change
Id Ie705f2462c7d5befa691f1ab57293e55ab68e3e2) recently added a revised
"start hotlist" handler. The only known client of the existing
interface was converted to use the new interface with change
"qcacld-3.0: Refine the extscan start BSSID hotlist logic" (Change-Id
I4d9f982177bc61a751ba0e7437fe55482dfd2723) so remove the now obsolete
interface.
Change-Id: I6e43170daa3ed2d932f1f2fa6717ea230a37ea8b
CRs-Fixed: 2294278
Clean up WMI component prints by correcting trace levels for
regularly occurring prints and removing newlines from converged
print APIs since qdf_trace_msg appends them by default.
Change-Id: Ie375e6fda2943f5f2b7287da4374ef9d7470d593
CRs-Fixed: 2243843
There is an existing WMI command which is used to start the extscan
hotlist monitor, wmi_unified_get_buf_extscan_hotlist_cmd(), but this
API has multiple issues:
1) The "get_buf" in the name implies it retrieves something, but it
doesn't.
2) The full name is not a "mirror" of the companion function that
stops the monitor, wmi_unified_extscan_stop_hotlist_monitor_cmd().
3) The current function has an "int *buf_len" parameter that is unused.
To address these issue introduce a new function with "mirror" naming,
wmi_unified_extscan_start_hotlist_monitor_cmd(), which has an
appropriate parameter list.
It is expected that all clients of the existing API will be moved to
the new API, at which point the existing API can be removed.
Change-Id: Ie705f2462c7d5befa691f1ab57293e55ab68e3e2
CRs-Fixed: 2289368
For a full explanation of the problem and phased solution refer to
"qcacmn: Clean up the extscan unified WMI (phase 1)", Change-Id
I11800361b572331cfada00fb7d518c314df20b43, in the qca-wifi-host-cmn
project.
For phase 2 (this change):
Replace all references of the badly named identifiers with references
to the properly named substitutes. Note that this phase may touch
multiple repos and may involve a number of separate changes.
Change-Id: Ie19d632faa50b23f18a2214a7b2502830ff3fbd3
CRs-Fixed: 2282767
Add WMI support to send action OUI extensions to firmware.
For STA interface, this feature is intended to control mode of connection,
connected AP's in-activity time, Tx rate etc.,
Change-Id: I6a0bc9d3f7f0d57805b872cae4baa1fe84fb8193
CRs-Fixed: 2254509
Add support for sending WMI command to firmware
to measure estimated airtime that a new client
will get and populate the result that firmware
returns in the ESP IE.
Change-Id: Ic5fcb11100ecd0597ba02dfa5512e2f4ff3558c9
CRs-Fixed: 2261469
WMI recording is done per pdev and hence an instance of
debugfs directory (eg: WMI0, WMI1, WMI2 for 3 radio boards)
has to be created in /sys/kernel/debug/ path.
The wmi handle is per pdev and hence is causing the problem of wmi_instance
being 0 always as each pdev has its own wmi_handle.
WMI1 and WMI2 debugfs directories are not created as wmi_instance
is always 0.
WMI debugfs directory is created for every pdev of the psoc and naming
convention is changed to WMI_SOCx_PDEVx.
Change-Id: Ieb7e9d072d84f699588a8f719508c5cd8d9873fb
CRs-Fixed: 2232472
Android Packet Filter 3.0 requires the framework to be able to
read and write into the APF work memory in the Firmware. It
also requires to be able to enable or disable the interpreter.
New WMI commands are defined for read/write/enable/disable
operations.
Complete the implementation of these new commands.
Change-Id: I852d61eb213d9ae530e8a71069144ef35816f5b8
CRs-Fixed: 2184971
In implementation of Android Packet Filter, functions, variables,
definitions are named after BPF, which stands for Berkely Packet
Filter. The term was more appropriate for Link Layer packet
filters implemented in the Linux kernel, known as Linux Socket
Filters.
The term BPF is obsolete now, so rename it with the
appropriate acronym, APF.
Change-Id: I606afc747cddedb524a41cd8e5998400f04e69f6
CRs-Fixed: 2191531
Add support to configure logging buffer size from
per-OEM kbuild based on memory requirement.
Change-Id: Ia91d79e5e738b1c9787015de101c3f67ccde46aa
CRs-Fixed: 2253438
In case PMO feature flag disable, add this change. Change
WLAN_PMO_ENABLE to WLAN_POWER_MANAGEMENT_OFFLOAD.
Change-Id: I875e568dcb239da1b86d1a76cb8cbc925bb13cde
CRs-Fixed: 2243948
Add support for ndp schedule update event and provide channel information
in ndp confirm event.
Change-Id: Ic2c073dd4f220627cc2bd1a2d52d858136b6b450
CRs-Fixed: 2180310
Send average radar parameters to FW.
Extract host dfs spoof check status from FW.
Change-Id: I70c4e5aad0fe1eda55da37abd20cc6d70728edba
CRs-Fixed: 2211883
Address the following issues in the wmi folder:
CHECK: 'addres' may be misspelled - perhaps 'address'?
CHECK: 'COMAND' may be misspelled - perhaps 'COMMAND'?
CHECK: 'defintion' may be misspelled - perhaps 'definition'?
CHECK: 'happend' may be misspelled - perhaps 'happened'?
CHECK: 'managment' may be misspelled - perhaps 'management'?
CHECK: 'messsage' may be misspelled - perhaps 'message'?
CHECK: 'overriden' may be misspelled - perhaps 'overridden'?
CHECK: 'poiter' may be misspelled - perhaps 'pointer'?
CHECK: 'refering' may be misspelled - perhaps 'referring'?
CHECK: 'refrence' may be misspelled - perhaps 'reference'?
CHECK: 'shrinked' may be misspelled - perhaps 'shrunk'?
CHECK: 'succesfully' may be misspelled - perhaps 'successfully'?
CHECK: 'succesful' may be misspelled - perhaps 'successful'?
Change-Id: Ie97e4d83cc88a2610524b38adc3474cdd31170d9
CRs-Fixed: 2241590
Add changes to support get congestion stats(arp stats) from
within cp_stats component.
Change-Id: Ic3b2f020c0169c9113c1b40738f782cbb3b8f6c5
CRs-Fixed: 2222781
Remove duplicate structs wmi_dual_mac_config and sir_dual_mac_config
and use policy_mgr_dual_mac_config.
Change-Id: I6da6539f519ec46ee274ba3f3ae042e5fd9c25d2
CRs-Fixed: 2191031
Fix memory allocation during NDP firmware events by allocating
memory before wmi_extract APIs are called.
Change-Id: I3af2f49895a79a45b3add246eeb9025b1df92faa
CRs-Fixed: 2183493
There are instances of use of older A_UINT/A_INT.
Replace all such instances with the qdf u_int*_t/int*_t.
Change-Id: I7ce29b03f29a0d1a0cf87cfd3c846f4694da4c2a
CR's-Fixed: 2210869
IPA module has been moved to CLD component under the converged
driver model. Point the wmi API's and structures to the newly
defined files.
Change-Id: I96205f7cc18dbea1c05a5f6314490ea6b3dd75fd
CRs-Fixed: 2180176
Modify arguments of wmi_unified_attach to use struct to
send attach params instead of individual params. Add max
WMI commands as a param. Based on requirement MAX WMI
commands value is different. In case of AP that supports
16 VAPs and more than 512 clients, 1024 commands is not
enough. Use this param to configure this value based on
the requirement.
Change-Id: I4e778475481e509051dfbac70980614b644e1b4a
CRs-fixed: 2034438
The WMI_MAX_CMDS macro was defined in wmi_unified_priv.h, move it
to wmi_unified_param.h so that it can be used to set
wmi_unified_attach_params.
Change-Id: I33aaa3c1fb189c7ef660ccbc5262afd0a1ee258b
Add function for extract_nfcal_power_ev_param and
register wmi_pdev_nfcal_power_all_channels_event_id event
to support noise floor in HK.
Change-Id: I6eef823b507be94c65df026664244eec7fc07e24
CRs-Fixed: 2157972
qcacld-2.0 to qcacmn propagation
Adds qdf time api to get time of the day in millisec
Also send host timestamp to firmware, so that firmware can print the
logs timestamp in sync with host via the wmi interface,with
api wmi_send_time_stamp_sync_cmd_tlv()
Change-Id: Id6acfc5227fdca2fbf8d266998fdfc4046adc5f4
CRs-Fixed: 2193978
Change WMI initialization sequence to support WMI modularization.
TLV and Non-TLV modules calls WMI module registration based on target type.
WMI attach will call respective attach routines based on registration.
Change-Id: Id56446f491d129758537913d2d5d6633f8dec918
CRs-Fixed: 2179854
Remove dependency on WMA layer for green AP component by registering
green AP events through target_if layer.
Change-Id: I8fe9079c6ba6b23cd5f1d98a7d1b333fde31f19b
CRs-Fixed: 2178143
Currently WMI handler for WMI_PHYERR_EVENTID is used to handle DFS and
spectral scan phy errors; but Rome FW still uses WMI_PHYERR_EVENTID
and WMI_DFS_RADAR_EVENTID and does not have spectral scan phy errors.
Restore WMI_PHYERR_EVENTID and WMI_DFS_RADAR_EVENTID as Rome FW
requirement.
Change-Id: I23ca4ff6c9be0ba6a0f21f0e0ef9161b1942f629
CRs-Fixed: 2160431
Added a WMI command to add and del peer from the list
of non associated clients for which the RSSI stats
need to be populated
Also added event handler to extract the rssi stats
from the WMI event
Change-Id: I9880c74798c13a52e1498b81735ad78f86fa41b8
CRs-Fixed: 2148773
Recently change "qcacmn: Add SAR power limit configuration"
(Change-Id: I0a214a2af780e9dd8c381c4e9eaa7d8cab6ef853) added the
ability to dynamically configure Specific Absorption Rate (SAR) power
limits. Now add the ability to retrieve the current active power
limits.
Change-Id: I7a6071dee71300daa3a217780ff3523604a11795
CRs-Fixed: 2161451
Add new WMI EVENT, SW FILS Discovery Alert Event, to get
firmware trigger to transmit FILS Discovery Frames.
Add WMI command to send FD frame buffer to firwmare.
Add WMI command to set FD period interval in mili seconds.
Change-Id: I8cb6279ec4431b9236bd32c548228a0dc6598664
CRs-Fixed: 2118098
