Adds wlan_scan_start and wlan_scan_cancel public APIs to use
from non-osif component, as ucfg_* API should only be used from
OSIF.
Change-Id: If603e49a57641dba26163454bce12327660b20fd
CRs-Fixed: 2773612
Add support to filter APs based on dot11mode such
as connect only 11N/11AC/11AX capable APs.
Change-Id: I0046c726d944dd08453c19086282e32d0599ddac
CRs-Fixed: 2769979
Add change to move the existing filter params bool datatypes
into bitfields and also add new filter type to filter candidate
with channel marked as DFS hit.
Change-Id: I4aa5d7342cf7880da20c35eebd99fc72a71b58be
CRs-Fixed: 2746157
Currently, vendor scan request is enqueued in the scan queue first and
then posted into the scheduler queue. Now if there is an SSR in between,
then scan request will be freed twice. Once in SSR context and again
in the caller context because scan scheduling fails due to user disabled
the scan.
To resolve this, post the scan request in scheduler queue first. Once
scan request scheduling is success, then enqueue the scan request in
scan queue. This approach can lead to a race condition like after
scheduling scan request, host may get scan response from firmware even
before the scan request is queued. To avoid this race, scan request
scheduling and enqueue should be protected by scan_req_q_lock.
Change-Id: Ic26da0181fb9a902a8a4abb8f68d9fc668f1b3f2
CRs-Fixed: 2714495
In the TBTT info of RNR, one byte is added for power
spectral density. Add logic to get the PSD limit.
Change-Id: I7ce44a762c47d0d0526157fcb41a80ad3ef3c08e
CRs-Fixed: 2731433
Remove unused filter params from scan filter. Also
change the type of few, to decrease the memory required.
Change-Id: I3f86d416805174b56c8998f5a4a4723d9ebdd90b
CRs-Fixed: 2723220
Add new scan type SCAN_FOR_CONNECT to support connection manager
infrastructure.
CRs-Fixed: 2713772
Change-Id: I631f3f0324e82ef6cd8b2befbed020649c80bc4c
There are different version of SSID structure used in driver, replace
them with struct wlan_ssid.
Also move struct element_info from scan module to generic structures.
Change-Id: Ia32f82d943980c23b4ff478f5a06c5c053036de5
CRs-Fixed: 2721872
Kernel reject the beacon/probe resp frame with invalid channel in
DS,HT info and HE IE, but same frame is added in the scan cache
and when mlme refer this frame, connect issues are seen due to
invalid channel.
Thus do not add the entry in scan cache.
Change-Id: Ib2891f95034b04be26c5feefed7c4354d8bb367a
CRs-Fixed: 2708975
In struct weight_config, "oce_subnet_id_weightage" added newly.
Station uses "oce_subnet_id_weightage" as one of the parameter for
selecting AP candidate during initial connection. Host sends
"oce_subnet_id_weightage" ini value to firmware over WMI command
WMI_ROAM_AP_PROFILE.
Add oce_subnet_id_weightage in scan object scoring param to calculate
weightage based on SUBNET ID and select candidate accordingly.
Change-Id: I6583f46f661eaefabbad858bc7fb34e37443ebae
CRs-Fixed: 2675924
Change max AP score limit from 100 to 200 and thus change
BEST_CANDIDATE_MAX_WEIGHT to 200 from 100.
Also remove duplicate sanity check, which is already done while
getting values from INI.
Change-Id: I4f87a00e90b7d5d829007d89cbf7cfd9b70fa4dc
CRs-Fixed: 2673980
The roam sequence in LFR-3.0 is roam scan start notification
from firmware followed by roam start indication and then
roam synch,roam synch frame events. Roam start is sent
after candidate selection and host driver will disable
queues when roam start is received.
But for emergency roam trigger, firmware sends roam start
indication directly without notifying roam scan start to disable
data path queues immediately after deauth received from the AP.
So roam start is received before roam scan is started at firmware
and before candidate selection is done.
After roam start notification, host sends scan abort for all scan
on vdev by setting scan command request type to
WMI_SCN_STOP_VAP_ALL. This results in roam scan getting aborted at
firmare in emergency deauth roaming case and roaming fails.
Introduce new vdev id value based on which the scan module will
abort only host triggered scans setting the flag
WMI_SCN_STOP_HOST_VAP_ALL in the scan request.
Change-Id: I3a162c55d4a008ff986fd957bed395b39c060bb5
CRs-Fixed: 2636410
The driver doesn't ageout connected BSS from rrm scan
result after the scan default ageout time. This results
in connected AP information sent in beacon report request
in table mode always.
Introduce scan api to get the scan age out time configured
from scan module. This value will be used as the threshold
in rrm scan filter.
Change-Id: Ib3981538faf179cff53936770f705d41922dca66
CRs-Fixed: 2650914
In struct weight_config, "oce_ap_tx_pwr_weightage" added newly.
Station uses "oce_ap_tx_pwr_weightage" as one of the parameter for
selecting AP candidate during initial connection. Host sends
"oce_ap_tx_pwr_weightage" ini value to firmware over WMI command
WMI_ROAM_AP_PROFILE.
Add oce_ap_tx_pwr_weightage in scan object scoring param to calculate
weightage based on AP tx power and select candidate accordingly.
Change-Id: I7f717e9cc398e8b9307f2f464f972b095c06364b
CRs-Fixed: 2647116
Currently QDF_MAX_NUM_CHAN and NUM_CHANNELS aren't aligned, this unalignment
may cause many potential OOB access. So replace QDF_MAX_NUM_CHAN with
NUM_CHANNELS to keep unified.
Change-Id: I7bf7829d776f7caf5b2afbd2c9fd0c20d608e630
CRs-Fixed: 2644073
The default value provided for the INI item
gScanProbeRepeatTime for WIN is 50 which is
beyond the specified INI range 0 and 30.
Changing the max value to 50 to accommodate
the default value used by the INI and avoid
warning while parsing INI values.
CRs-Fixed: 2633733
Change-Id: I442d07de55813c930b77e7dfffcdebf5372c5c0e
Populate RNR info during scan req instead of beacon
add/delete to avoid loop while holding scan db spin lock.
With loop spin lock can take more than 5ms, which can results
in asserts.
Change-Id: I4ba346b8dcbaf7da844f97195dbdd3003bdb234b
CRs-Fixed: 2640889
"WPA3-SAE Single PMK" is a feature by which STA can
complete SAE roaming to specific group of AP(s) using
single PMK. This is done with the help of advertising
vendor specific SAE single PMK IE in the beacon/probe.
When vendor specific sae single pmk IE (oui 0x00 40 96,
type 0x03) is present in the beacon/probe of AP then the
BSS supports WPA3-SAE roaming using Single PMK.
Add changes in scan module to parse the Vendor specific
SAE single PMK IE and copy it to the scan_entry ie_list.
Change-Id: I5b7096d1360c624ce1c47e56e8cad37adbdda1e3
CRs-Fixed: 2616099
Currently there is no support to dynamically set dwell time
for 2g channels.
Add support in existing command SETDWELLTIME to dynamically
configure dwell time for 2g channels.
Along with set, add support to get dwell time for 2g channels
with the existing driver command GETDWELLTIME.
Change-Id: I8a71e39338e7a81690140f50bc3c5ac7b0bd63eb
CRs-Fixed: 2620370
PNO scan is failing to start because it is coming with 97 channels
but the current max number of channels in PNO scan is 60. To allow
for a larger number of channels, increase SCAN_PNO_MAX_NETW_CHANNELS_EX
to 100.
Change-Id: I3ac08f83f9f500899656caf48c112c33580cef70
CRs-Fixed: 2585685
RSSI in the scan entry is a negative value. It was converted to positive
value and if the converted value is greater than WLAN_RSSI_DUMMY_MARKER
(has positive value 295), util_scan_entry_rssi() was returning 0 to the
caller.
util_scan_entry_rssi() is used for printing RSSI value. Since RSSI is saved
as a negative value and caller expects it as a negative value, return a
negative RSSI value from util_scan_entry_rssi().
Change-Id: Ifdeb88dfa42a6927ff29670429d846ff071e9c59
CRs-Fixed: 2576129
Depending on the requirement, a bigger size or a smaller size for
the frequency variable can be chosen. The advantages of each size
are described below:-
Advantage of a bigger size:
When two technologies (e.g. 802.11AX and 802.11AD ) are controlled
by the same driver software, the frequency range may be very large
and a bigger size (e.g. 32bit integer) is more appropriate.
Advantage of a smaller size: When the frequency range is not very
large, a smaller size(e.g. 16bit integer) can be used. It saves a
large amount of space especially when many large arrays containing
elements of this type/size are defined in the driver.
Also, change the size of the IEEE channel variables to unsigned
8-bit integer.
Change-Id: Ie503623ec6e4473abe8ee95c19dc4470853326dd
CRs-Fixed: 2586177
Modify the following API's code and parameters to make
sure it is using frequency instead of channel:
csr_update_scan_entry_associnfo
Change-Id: Id289c2bd2e2cdf3f6a5e16028bbafb3df4049dac
CRs-Fixed: 2563874
To support 6G, replace chan id with frequency.
Replace channel_list and pcl_channel_list with
chan_freq_list and pcl_freq_list in struct scan_filter.
Change API scm_get_pcl_weight_of_channel to use freq.
Change-Id: I6e880986fb2dcb1fa7aa4f40d2e3f849e7e3af64
CRs-Fixed: 2561234
Add support for 6Ghz short ssid and bssid hint mechanism
as part of scan command.
Change-Id: I53a787d2a1406ffd658dc0765bae1e632b870b36
CRs-Fixed: 2559877
6G Scan mode for AP platform is different
from non-ap paltform so modified default values
accordingly.
Change-Id: Ifdea76b449998ffa5e33ffedd30564bd8eda8d6a
CRs-Fixed: 2555441
Add snr and avg_snr variables to scan entry and populate these variables
while generating the scan entry.
Add API to read avg_snr value from the scan entry.
Change-Id: Ie19d5ad7c8debb35e9d278ec648bd6217b2f4099
CRs-Fixed: 2532369
As a part of 802.11ax amendment, 6GHz band operation is added.
Since the 6 GHz channel numbers are overlapping with existing 2.4GHz
and 5GHz channel numbers, use frequency to identify unique channel
operation instead of channel number. Channel frequency is unique across
bands.
As part of above requirement add logic to process rx mgmt
packets based on the frequencies instead of channel numbers.
Change-Id: I33e31fa124cedfab31dd1827721a420ad6cdba07
CRs-Fixed: 2519512
Add support to scan for the 6GHz band capabilities
IE and parse the IE. Added peer assoc param for updating
the minimum data rate advertised by the peer in 6GHz
Opration information.
Change-Id: Iebb4379d321832f3ed2bcd3174a54843fa2d497c
Currently in the scan path frequencies received
in the scan request are getting converted to channel
number and again converted to frequncies.
For 6GHz support in the scan path do not convert
frequency to channel number, instead use frequncies
received in scan request to send the scan command to
FW, remove the dummy conversion from chan to freq and
freq to chan.
Change-Id: Ieab7dded0678fac54796bba3b1b210c910f6173e
CRs-fixed: 2534897
Clean up CONFIG_MCL and add MAX_BCN_PROBE_IN_SCAN_QUEUE
in the defaul_defconfig file.
Change-Id: I5c79ed31609ae67545d7ddf4a649925d1d071b9a
CRs-Fixed: 2495605
There are macro defined differenly for WIN and MCL
to pick up default INI value either for WIN or MCL.
The macro name uses WIN and MCL and also enabling the
right macro is controlled by CONFIG_MCL.
Replace the macro with CONFIG_AP_PLATFORM.
Change-Id: Ib5663532d45534cce1715ef06447116e2654e709
CRs-Fixed: 2484959
Currently with the support of Blacklist manager
component, all the blacklist, avoid list, RSSI-REJECT
list is maintained by the BLM, hence the filter logic
of the blacklist APs in the scan component is not
required.
Cleanup the blacklist BSSID APIs, and related functionality
Change-Id: Ic2f282d9ab7d6d30d87d9718a128cbd8446aff4c
CRs-Fixed: 2464191
Currently dwell time is determined by scan policy flags from kernel.
Sometimes when we suspect the scan result is not full enough, we need
to set dwell time by force through ini.
Add ini to decide whether to honour NL80211 scan policy flags, so that
we can disable dwell time changed by scan policy flag from kernel.
Change-Id: Ia0b9f957a7de901513479522e008e4bcbd6b2c0e
CRs-Fixed: 2428630
