Several qdf_*_outline() APIs exist which are straight aliases to their
regular qdf_*() counterparts. Remove them, and update any callers to use
the regular APIs instead.
Change-Id: Ibe6e9cced521b93061e89690ab817ceafe49a469
CRs-Fixed: 2408267
A service bit is used to indicate support for MBSS IE.
This is set as capability in host at psoc level.
In host, we also maintain a flag for user to configure
MBSS support at pdev level. It could be used in future.
Change-Id: I31a27a755fb027de93bfe6c9639fdbda9693bace
CRs-Fixed: 2403030
Add support for UL_RU26 WMI service which will notify the host if
the target has allowed UL_RU26
Change-Id: I639c0872f541cf30776c9f76b87c4b950c1e17f4
CRs-Fixed: 2390350
check for max_ast entries supported by FW and add the
entry on host accordingly.
Change-Id: Ief70ba631bb41d50c79d3673e3eea0c45b0c1e19
CRs-Fixed: 2355947
Extended service ready event has a tlv
containing the spectral bin scaling parameters.
Populate the spectral capabilities using this info.
CRs-Fixed: 2379652
Change-Id: I0b4648302e7170b5965cf1aec68638e70cd36e73
Call qwrap_config enable from both ready and extended service ready
handler. This change is needed for lithium chipsets where the number
of radios per soc is more than 1. Number of radios is updated only
in extended service ready handler and this qwraP_config_enable should
be called in extended service ready
Change-Id: I12289c38996f3bb4274e5795d434dd86c83f34c0
CRs-Fixed: 2384604
Add host support for db2dbm RSSI changes. Firmware
indicates this capability when underlying hardware
has RSSI reporting feature. Based on this capability
host will know if firmware sends SNR or RSSI. If no
capablity is present then host will convert SNR to
rssi using a fixed offset of -96. If capability is
present host will directly use the rssi as it is.
Change-Id: I9058f16c6280d466feb96cf88a8a0d8cd7b02032
CRs-Fixed: 2364025
Add support to choose the hw_mode_id from FW supported modes. Preferred
mode will be selected if it is not configured in ini params. It is
selected based on the precedence as per capabilities supported by the
mode. For eg., if FW supports DBS and DBS_SBS, DBS_SBS is selected as it
supports three radio compared to DBS's two radio.
This can be overridden by user by setting proper hw_mode_id in ini file.
Change-Id: I162c3a66182882890c416a68f7f64d5149b8f1e5
CRs-Fixed: 2361280
In function init_deinit_chainmask_table_alloc, alloc size is declared
as uint32 and is assigned the value the multiplying non zero value
sizeof(struct wlan_psoc_host_chainmask_capabilities) and uint32
value ser_ext_par->chainmask_table[i].num_valid_chainmasks.
This can lead to overflow as multiplies value can be more than uint32.
Change-Id: I9a886d9ee5213ae8989a2c5d4502336cc275418a
CRs-Fixed: 2347650
num_mem_reqs used as for loop vairable in init_deinit_handle_host_mem_req,
will give user control over tgt_hdl->info->num_mem_chunks used in
init_deinit_alloc_host_mem() which is later passed to
init_cmd_send_tlv().
In init_cmd_send_tlv() num_mem_chunks is used as a for loop variable,
and can result in OOB issue.
Change-Id: Ica9bd42e596da19a4033ffd9424ddeedb593bad1
CRs-Fixed: 2331844
Abstract BMI callback from common module and move it to specific component.
Add Export symbols to support modularization in WIN. (BMI)
CRs-Fixed: 2324081
Change-Id: I1ec463d41d238ce81254ecc1f0bb1dc545e1248e
Add host WMI support for EAPOL minrate resource configuration.
Through the use of the global.ini configuration parameter -
eapol_minrate_set and eapol_minrate_ac_set, the user can set EAPOL
frames to be sent in minimum rate in tunnel mode. In addition to
this, the user can also select between the 4 ACs (BE, BK, VI, VO)
to send the EAPOL frames.
The changes are reflected in the target resource config which
is sent to the firmware.
Change-Id: Ib9a264b64305bf43708c3c2af3ff254b6cc28477
CRs-Fixed: 2298020
Host changes to enable HTT version 2 messaging for
PEER map and unmap in FW and changes to handle these
messages in host
Change-Id: Ifbe478212bbbc9c9ea1c1e4791c7a78407c376cc
Make the HECAP and HEOP changes for 11ax Draft3.0.
Draft2.0 support can still be enabled by unsetting
SUPPORT_11AX_D3 in config.unified.wlan.profile.
Change-Id: I0c0fd885a43b672baca61011b75a51526481b1ee
CRs-fixed: 2294235
1. Service ready ext includes a parameter for max
BSSID indicator.
2. Beacon template includes MBSSID IE offset.
3. Vdev create and up cmds include more parameters.
Change-Id: I71214eacdaa886725b7ea8f61db3a743ba6597e9
CRs-Fixed: 2306638
Reduce log level for few prints to debug to avoid flooding
of prints to console.
Change-Id: I514585cc87d51ead15fb1f40d45f62023628d9bb
CRs-Fixed: 2296839
TWT requester/responder capability is reported by FW in service bitmap.
Based on this support set soc's extcap feature bit. This is used while
adding extended capabilities IE to set TWT REQ/RSP bits in IE.
Change-Id: I304e9fa4dc32bd3c2f47901bc34438cb188d138a
CRs-Fixed: 2290026
Excessive logging in target_if has been identified as the root cause of
a watchdog timeout. Reduce target_if logging in normal operation paths
to debug level to avoid excessive CPU use.
Change-Id: If384474270bb4b860100b98e5eea81d54b7c2184
CRs-Fixed: 2286630
In current implementation, wait_queue is used for waiting on WMI ready
event, it is now changed to event mechanism
Change-Id: I08b4f088874b7c63e20b129f14dbac01851496e5
CRs-Fixed: 2276900
In the scan channel list, host sends both 2.4GHz and 4.9GHz channels to FW
because there are ieee channels which have same value in 2.4 GHz and 5GHz
bands. Example: channel 1 is 2.412 in 2.4GHz and 4.942 in 5 GHz.
When converting a channel to freq, the host uses low/high 2GHz and 5GHz
frequency ranges. For a partial-offload 5GHz pdev, both low/high 2.4 GHz
and 5 GHz frequencies are set and hence 4.9 GHz channel is converted to
2.4GHz frequency.
To fix the above issue, based on the wireless modes remove either low/high
2.4 GHz or low/high 5 GHz frequency based on the wireless modes.
Change-Id: I1fb0a56c70d1dc0ffc2731da3f25c910af46bb41
CRs-Fixed: 2239771
As return of wlan_psoc_get_qdf_dev(), qdf_dev may be
NULL. Add null check in case referencing null.
Change-Id: I7e9bd54e5f4b5260f664bdd4ccee0e4267e2b81e
CRs-Fixed: 2247327
Initialize local array reg_cap in init_deinit_populate_phy_reg_cap
to avoid accessing uninitialized fields in the array.
Change-Id: I9afb8d47cc12b3d1626aa64a52f9583d45df5f34
CRs-Fixed: 2232822
Replace functions with ucfg as prefix in init_deinit_ucfg file with lmac as
prefix
Change-Id: I90d77dd5ddae4854ea68eeb67dc1b4fc356c2fe3
CRs-Fixed: 2182449
Void pointer usage may lead to memory corruption due to
wrong pointer is typecasted. Hence define structure for all, and modules
internally typecasting based on their type
Change-Id: I6271ed8aa3f94254fd85f41962f23ea36895154e
CRs-Fixed: 2182452
bss peer are used for each vdev. Include this count also in the num_peer
count sent to FW.
Change-Id: I71c4858ebe416a644f9e100a8d28ac1fd7989757
CRs-Fixed: 2233009
Initialize the peer map and peer hash memory based on the config
received from target in service ready event
Change-Id: I8e1b62cd9586f5b2be7acb863a106d2486be1b35
CRs-Fixed: 2223428
Converge dbglog and diag_event_log component through fwlog api
interface. It abstracts dbglog and diag_event_log from other
components.
Change-Id: I8f86a4381fbb9af8386320906337638113c8f189
CRs-Fixed: 2217556
Module param capabilities stored per module per pdev and overall
target dbr ring capabilities allocated and stored during service ready
are not freed during detach.
Fix above mentioned memory leaks through below changes
1. Free module param capabilities allocated per pdev during ring deinit
2. Free DBR ring capabilities allocated during service ready event
as part of target psoc info free.
3. Free DBR entries allocated per event received from target
Change-Id: I93d5126063d3fa0094e15d57a75f03cf63b3c494
CRs-Fixed: 2228428
1. Populate number of capabilities after extracting service ready ext param
2. Deinit ring during pdev destroy only if ring is configured
3. Do not allocate module param if no capability is shared for
the pdev by target
Change-Id: Ie92b7fc882ba8b7755fea150c724459264a0ea79
CRs-Fixed: 2192671
Initializing preferred_hw_mode to WMI_HOST_HW_MODE_MAX and removing
preferred_mode check. This is needed for Napier where preferred_hw_mode
of 0 is a valid configuation which represents single radio mode.
Change-Id: I8998745427427021f219667e03f767c66527d579
CRs-Fixed: 2192227
At some point WLAN_MACADDR_LEN was added to the driver, despite
QDF_MAC_ADDR_SIZE already serving the same purpose. There are cases
where these two macros are implicitly assumed to be the same value.
This is a classic single-source-of-truth violation, and only serves to
confuse developers. Deprecate WLAN_MACADDR_LEN and use
QDF_MAC_ADDR_SIZE instead.
Change-Id: I4e941d5e17d161a5810e693c89b95ae08f83c6b0
CRs-Fixed: 2179728
FW provides a list of MAC addresses in ready event,
one per radio. Change event handler to extract the
list. Legacy HW will use the single MAC address
function.
Change-Id: If0a9db3b7dab81bbeed387d2b7417100021e912d
