This is to enhance statics for runtime put/get, which is
to detect if there is mismatch for usage_count.
Change-Id: I24cddb9d10e4cb675c8375cbd0f589c7718bd680
CRs-Fixed: 2647972
whenever there is a wmi command timeout and recovery is triggered,
the htc credit history gives insight into whether host had the credits
to send the command to firmware. Add the credit history from the
htc module.
Change-Id: Iaa760981296862f8af496a23e3c24bc2fda0fb55
CRs-Fixed: 2651744
When packet tx fails at transport layer, packet is re-queued and given to
HIF layer again. In this change, print the warning message about re-queue
only when tx fails for 5 consecutive attempts due to no resources
available at HIF layer.
Since re-queuing is not fatal, it need not be printed on every attempt.
Change-Id: I00082470420e29dfe4fb7a745ac709a682ba032e
CRs-Fixed: 2621763
There might be a race condition between htc_kick_queues which is sheduled
by RPM resume and hdd_wlan_stop_modules.
Here are detail info:
1. Run time resume is called, which will schedule a work to do the
htc_kick_queues later.
2. hdd_wlan_stop_modules is called at the same time, which will call
htc_destroy to free the HTC_TARGET.
3. the htc_kick_queues will access the HTC_TARGET, but it has been
freed.
Change-Id: I7211a8eef2a2f1924fe91eafec5a4496eea5a507
CRs-Fixed: 2622317
Add support to track tasklet execution and total time in different
buckets for debugging purposes
Change-Id: Ide459c385b2a44c0f16d05b37879c8b462782d72
CRs-Fixed: 2589199
The htc connect message buffer is not unmapped,
if the firmware does not send wmi ready event to the
host.
Scenario:
- Host sends htc init command.
- The command is queued into the src ring.
- The firmware has crashed before the Copy Engine
could copy the message to the destination ring
- Due to the above point, no copy completion
interrupt is received.
- The host times out during its wait for the wmi
ready event.
- Hence the htc init command buffer stays unmapped
and unfreed.
As a part of the wma ready event missing cleanup,
the htc connect buffer is not unmapped. Fix this
to avoid missing to unmap the buffer.
To avoid a side effect of sending a completion for
HTC connect command, all the commands are freed in
the htc completion handler in case of SSR.
CRs-Fixed: 2512344
Change-Id: I05026b3cbb764197e6df85c41634002d271a50e5
Featurize wmi multi mac service with the feature flag
WMI_MULTI_MAC_SVC, to cleanup CONFIG_MCL dependency.
Change-Id: I34a513a90096c586091034029fc17b6bf23a7278
Add target specific HW header for ipq6018 compilation.
Remove the 8074 header dependencies for 6018 compilation.
Change-Id: I8e45e3e039a4596c6722538405dcd381918fa6b1
Set MaxMsgsPerBundledRecv in HTC_SETUP_COMPLETE_EX_MSG for USB,SDIO
interfaces.
This is required for enabling RX bundling.
Change-Id: Ifb6a9a7167701c051d405bfae125fcfd0c8c55c5
CRs-Fixed: 2414409
Use INI configured WMI credit for exchanging WMI messages.
Make sure INI configured value is less than FW advertised capability.
This credit configuration should be non zero.
Change-Id: I26b2dfbee0fc095aca3d37f21cd22c974189bb49
CRs-Fixed: 2411028
Per the Linux Kernel coding style, as enforced by the kernel
checkpatch script, pointers should not be explicitly compared to
NULL. Therefore within htc replace any such comparisons with logical
operations performed on the pointer itself.
Change-Id: Ibb6d24aff9824d7e7cf253c1fe3081443cbfb63b
CRs-Fixed: 2418252
If FW supports new htt format include only payload length in
the header length.
Change-Id: Ia5ec9a474bc5fe68de28273e6f9615d36de94a7c
CRs-Fixed: 2359253
After gerrit#2176826, which the change ID is
I615f0e4d6de150924b99b3444cebf00571ddc088, HTCCreditLock is
removed from creation. However, the destroy of this lock is
missed. Need to remove this obsolete lock completely.
CRs-Fixed: 2345978
Change-Id: I4b67aa2a12befcd94a04a8a6acd43e31ae0b837f
Clean up hif and htc component prints by correcting trace levels
for regularly occurring prints and removing newlines from converged
print APIs since qdf_trace_msg appends them by default.
Change-Id: I45b1bbe7b16ab7fb8e229b59a094c7382561d658
CRs-Fixed: 2243843
TX comletion for WMI_FORCE_FW_HANG_CMDID would come after
TARGET_STATUS_RESET is set. In such a senario, there would
be memory leak.
Flush TxLookupQueue for WMI_CONTROL_SVC during htc_stop.
Since netbuf is freed in ISR, just free HTC frame here.
Change-Id: I5fab3effda1db70fa9b1208c854231a88b48309b
CRs-Fixed: 2242862
When driver unload is triggered, check_for_leaks complains,
saying it finds pending entries in TxLookupQueue of ENDPOINT_0.
Flush pending entries in TxLookupQueue for ENDPOINT_0 during htc_cleanup.
Change-Id: Ica661453d5cef283526cfa1e7267d5349b5e2310
CRs-Fixed: 2249980
Address the following issues in the htc folder:
CHECK: 'mesage' may be misspelled - perhaps 'message'?
CHECK: 'packtes' may be misspelled - perhaps 'packets'?
CHECK: 'throught' may be misspelled - perhaps 'through'?
Change-Id: Ied03e5a720ca1cd872c88df4e5cb4e014210b729
CRs-Fixed: 2241577
Update WLAN-IPA WDI-2 datapath for DMA buffer sharing with SMMU
Stage 1 translation support. When SMMU Stage 1 is enabled DMA
APIs return IO virtual address(IOVA) instead of physical address.
This IOVA need to mapped to physical address by IPA module
before accessing them.
Change-Id: I33082bc74760b0f12c348238c6f48f5ce5750172
CRS-Fixed: 2072953
Add compilation flag to compile out HTC credit History
feature cleanly from the cld-3.2 driver binary
Change-Id: I615f0e4d6de150924b99b3444cebf00571ddc088
CRs-Fixed: 2190546
Optimize HIF layer driver load time console logging
to avoid any logging related side effect.
Change-Id: I3549256559b3565ab62bfba998a64cda8a971840
CRs-Fixed: 2174888
When HTC_PACKETs are allocated for bundle tx, netbuf and bundle
queue will also be allocated and stored in the context of
HTC_PACKET, but these two structures are not freed when the
bundle HTC_PACKETs are removed from pBundleFreeList and freed.
Retrieve the netbuf and bundle queue pointers from HTC_PACKET
context and free them when HTC_PACKET is freed.
Change-Id: I61d9eb18027b12f8b9491c696e4e16d793edf0d2
CRs-Fixed: 2127098
When the wlan driver is suspending, the last thing it does is check to
see if the firmware has indicated a wakeup during the suspend process.
This is done by checking the initial wakeup flag, which is set when a
specific copy engine payload is received from firmware. For the new
dedicated wake MSI, only the wake signal is received, no payload. When
the wake MSI is toggled, set the initial wakeup flag to prevent race
conditions during the suspend process.
Change-Id: Id53cc7884431a437136d8dca068449bc5a25b87c
CRs-Fixed: 2133469
Run throughput with Rome chip, crash happens since of too many logs
in pm runtime put and get. So remove log in these functions.
Change-Id: I9ca4ddef328ade7fef63d04f19603927cf8ee6d8
CRs-Fixed: 2112431
Tx lookup queue holds the reference of the packet that is successfully
transmitted via CE pipe. Tx lookup queue method can be called from
tx path and from tasklet simultaneously for the same endpoint.
One context can get the packet reference in its local lookup Queue and the
other context may not find the reference as this is not brought back
from lookupQueue to TxLookupQueue.
Fix this by adding a per endpoint lookup queue lock.
Change-Id: I0f4872f695e9ab15c27c91e733449f03871f4262
CRs-Fixed: 2047390
For SDIO WLAN, the creditsize is different for data EP than other
EPs. This change using alt credit size to replace of original
credit size.
CRs-Fixed: 2072158
Change-Id: I105db55da66e6123b2a53326d53758c24eca21ec
implicit conversion from enumeration type 'A_STATUS' to different enumeration type 'QDF_STATUS'
implicit conversion from enumeration type 'QDF_STATUS' to different enumeration type 'A_STATUS'
CRs-Fixed: 2063344
Change-Id: Id3613d0b7fca58c3d94c5af59838b0bff3ef26de
Firmware requires WMI commands to be sent on different copy engine for
each MAC. Change CE assignement to support this.
Change-Id: I91a2422a944741dc25c3bf45b18cde30e7409632
CRs-Fixed: 2005214
qcacmn to qcacmn-2.0 propagation
qdf_mem_zero is called after qdf_mem_malloc to set the memory
value to zero. qdf_mem_malloc uses kzalloc internally to allocate
memory which sets memory to zero.
Removing redundant qdf_mem_zero which are called after
qdf_mem_malloc.
Change-Id: I8e1faf6099f8fbc869c8af42b7511a13e66e6bed
CRs-Fixed: 1079697
propagation from qcacld-2.0 to qcacmn.
If host fail to allocate receive packet bundle buffer
it will return no memory without freeing receive pkt queue.
Fix is to free the receive pkt queue before returning from message handler.
Also, fill the rx free list during driver load time itself with the
pre allocated memory so that Tx won’t take away this memory.
Change-Id: I4bf2aeb7bc85cc68cfa1314e6dbf5057665ba7ce
CRs-Fixed: 1079623
We want to enable the compiler's -Wmissing-prototypes switch, but
there is existing code that is generating warnings. Fix all warnings
in the Host Transport layer.
Change-Id: Ic9c7f920883f41176d89419de25b7e02df0b895e
CRs-Fixed: 1093231
qcacld-2.0 to qcacmn propagation
Return HTC_SEND_FULL_KEEP directly in epping_tx_queue_full function
and give nodrop pkts higher priority over normal pkts
Change-Id: Ib36e1a9f34eb9054b12f0e8ba54a86ace7d6c8f8
CRs-Fixed: 990726
This is a qcacld-2.0 to qcacld-3.0 propagation.
pr_debug() should not appear by default in kernel log (kmsg).
DEBUG is a kernel macro, since host driver is using the same name macro,
pr_debug log statements are appearing in kmsg.
Fix this by moving the code under DEBUG to WLAN_DEBUG and
remove DEBUG macro from Kbuild.
Change-Id: I5bb385f91f9b6ba15629a5878625fefc21d4a7e1
CRs-Fixed: 1003261
htc_runtime_pm apis are needed to deprecate the qdf_runtime_pm apis.
The qdf_runtime_pm apis rely on cds_get_context which is not being
converged and thus qdf_runtime_pm needs to be deprecated.
Since the htc_handle wraps the hif context for most upper layers,
htc_module is providing a wrapper functions.
Change-Id: Ic66a0891db53b610fd4373e7528a08f2787f45fc
CRs-Fixed: 1044150
Add two new apis of dump bundle stats and clear bundle stats
for debug logging support.
CRs-Fixed: 975526
Change-Id: If8e3bc2bc5e5a4f1b2e180d7d5c4ce0695e933ee
Remove the header files which are not in common project so that HTC
layer can be converged.
Change-Id: Iaf5869e1d739cc80dcc5b89a446f499527350e38
CRs-fixed: 982024
Clean up CDS related functions so that HTC layer can be converged.
Also add compilation flag for runtime PM APIs.
Change-Id: I4c4a06b4387c8cc3f9b41d0191f46d7fa1b0a0b4
CRs-fixed: 982024
There are two ways to enable/disable HTC credit flow control. One is
in HTC itself with a static variable. The other is from the modules
who want to establish HTC service (e.g. WMI or HTT) by sending the
request. Make sure credit flow control enable/disable can be safely
done by other modules so that HTC layer can be converged.
Change-Id: I169c1ac7b410a7c9e7203c174bf1f1ec8a07ca06
CRs-fixed: 982024
Reduce the api footprint of hif and make hif responsible for controlling
its own timer as part of suspend resume.
Change-Id: I256161a8d147e99811f018c995081684f2bd0167
CRs-Fixed: 986480
