Set num_max_active_vdevs to WMI init command and
extract it from WMI ready event.
Change-Id: I6d6377c03214fcab74c675839f136301ebf27834
CRs-Fixed: 3183010
Add init sequence handling to support AFC device deployment type
Set AFC device deployment type to regulatory private obj
Change-Id: Ib041d2010552412aaaa41395915d948aa2ea2bba
CRs-Fixed: 3190288
Add support to manage Wifi pos vdev private object. Add new peer
type in enum wlan_peer_type. Add rx_ops and register the rx_ops
for PASN peer create/peer delete request.
Register 11az PASN related WMI events in target if.
Change-Id: I2a5e4d8d7c9b9562d9ab02b287957e93ee6f4758
CRs-Fixed: 3154521
Read the management Rx reorder snapshots back to back to get a
consistent value.
CRs-Fixed: 3181479
Change-Id: I5ff73db5d4be362d7449494f3630a11da0456f0e
Currently host driver defines 11d offload APIs under
HOST_11D_SCAN feature flag which is not correct.
Add 11d offload APIs under TARGET_11D_SCAN feature flag.
Change-Id: I0d3205b215c9fc363a71c4e7a6b54e40fb10a964
CRs-Fixed: 3183200
When we try to unregister a module that was not registered earlier, we will
try to unmap the buffers that were not allocated. As a result, we end up
with invalid memory access. Fix this issue by checking if the module was
registered before unregistering it.
Change-Id: I97c4ee7a6690c6cba2a7d1a919a39fcb12ebb692
CRs-Fixed: 3179498
Add change to fetch and save the WMI service capability
bit of FW to support multi-client low latency feature
using service bit.
Change-Id: Ifce82c06fc913668949ed06634da1eebcea80397
CRs-Fixed: 3180932
While pushing WMI cmds for TWT enable/disable, use separate
CE instance for each pdev.
Change-Id: I63e77996f9face7e319fbd8abf580d13ce1c05a1
CRs-Fixed: 3162042
Firmware advertises per candidate roam frame capability to
indicate:
1. Firmware sends auth/assoc frames for each candidate to
which roaming was attempted.
2. Fill the frame info TLV with authentication algo = 3
for authentication frames.
Add support for the roam per candidate frame info capability
Change-Id: I95c23031ab0fbc21fb9d8db3bd54004e4d1ac234
CRs-Fixed: 3172311
packmode_fftbin_size_adj is used when the reported FFT bin length from
HW is twice the actual size. This issue is fixed in HW from Pine onwards.
So, don't use this WAR on QCA9574.
Change-Id: I43a4bcb6f238fac6a14c1f6459d7ad24a7a99b2d
CRs-Fixed: 3165085
Update cfr metadata version for Alder as agc gain table index
is reported newly on this target
Change-Id: Ie9b4933068163d461676a9005ba8c706730717e8
CRs-Fixed: 3170137
1. Since peer id is reused for reconnection in MLO case,
old entries for queue desc addr is cleared. Clear the reo
internal storage and reset it back on client connection.
2. Send Qref feature WMI cmd to FW to enable the feature.
Change-Id: I6705ce121c8c25d9a2ace039dab21312fa5ea4b1
CRs-Fixed: 3156642
Puncture is one of 11be feature. Even 11be compile macro is defined,
Dut can start AP with non-11be mode. Regulatory component has no idea
whether it should consider puncture or not. Puncture should be a
configurable parameter from caller.
When updating channel state, puncture should be considered for 11BE
AP. is_create_punc_bitmap should be set in struct ch_params and pass
it to reg_get_5g_bonded_channel_state_for_pwrmode.
Change-Id: I96fb131f2df201a827ab7d98ca099a38b008e0d3
CRs-Fixed: 3160259
Validate the MLO HW link related info obtained from the global shared
memory arena of management Rx reorder feature.
CRs-Fixed: 3111549
Change-Id: I6fd7812dc49bfa8428b2ffbf66ae978592734bc0
When non-TLV targets are used, the WMI event table is not populated.
So, it shouldn't be treated as fatal and WMI event register/unregister
functions can return NOSUPPORT instead of FAILURE.
Handle this value in TWT code.
Change-Id: I5bc8e7aae2e572c84ea0333c967cff527d5cbcc3
CRs-Fixed: 3145077
Update cfr metadata version for Pine and HKv2 as agc gain
table index is reported newly on these targets.
CRs-Fixed: 3158325
Change-Id: I17fe5a78ec44e1528e6187535a803c729734dd18
Include a UTC timestamp when constructing the CFR header,
represented as a 64-bit nanoseconds value. This will allow
for better correlation with ground truth data.
CRs-Fixed: 3156846
Change-Id: Ic5308bcd591d641e715ded8e4b75d447160dbbce
Add API target_if_get_active_mac_phy_number to get max
active MAC-PHY pairs from target IF.
The API will loop through all HW mode and get max MAC-PHY
number in all HW modes.
Change-Id: I2755197c043f9d2df6f8aaf6bf50093a2d1b1596
CRs-Fixed: 3154072
Add support to set 11az ext feature flags
Read the firmware capability for 11az features and
advertise the corresponding wiphy flags.
Change-Id: I85f6cc2f65a5d9892830f66a726cffc823093bca
CRs-Fixed: 3150584
Add the following stats.
- Number of Spectral events received from the target
- Number of consume_spectral_report() invocations
- Number of fill_samp_msg() invocations
- Number of SAMP messages that are ready to be sent to the user-space
- Number of SAMP messages queued to the user-space
Change-Id: I53fda4b309620043a77bc2bc87573941d7fb0bcb
CRs-Fixed: 3156151
Changes to add chip crash info in global shared mem arena
and expose the respective APIs to qca_ol.
Also add APIs to process global link info tlvs in order
to offset to crash info.
CRs-Fixed: 3121465
Change-Id: Idabf9fb8d4755bdd755897b3c09d2e28259a6f46
Changes to move the global shared memory arena init deinit
APIs from MGMT RX REO cmponent to MLO component.
CRs-Fixed: 3121467
Change-Id: Ie5ca50780ffb3343d225b6cf6acfa569463d5a3e
Enable the wmi_service to fetch the radar found cfreq from
wmi_service_radar_found_chan_freq_eq_center_freq.
Add changes in DFS random channel selection algorithm
(1) To find a channel of input width 320MHZ. Since 320MHZ in 5G
is 240MHZ (320 - 80 punctured), there are 12 valid 20MHZ subchannels
possible in 240MHZ. Validate the continuity of 240MHZ channel before
declaring the channel to be found.
(2) To find a fallback channel for the input channel
width of CH_WIDTH_320MHZ. The fallback channel of 320MHHZ is
160MHZ.
CRs-Fixed: 3149475
Change-Id: I03cac7f090de20efd912402b5e4df543b47aafed
Read out of bound due to invalid cookie and cause device broken. This
change checks cookie before using it as index of DBR buffer pool.
Change-Id: I1abc7d771cc62a7dd2dfe98784bf8ef2710f26ca
CRs-Fixed: 3144133
Add support to receive the fft_recapture arg value
from spectraltool, handle the FFT recapture config and
pass this to FW. The recapture feature must be
enabled only for spectral scan period > 52 us and
Normal Spectral scans.
Change-Id: Ied637704d25bb15bff2139a215da7481d4f80e4f
CRs-Fixed: 3140890
Add support to handle the FFT recapture config and
pass this to FW. The recapture feature must be
enabled only for spectral scan period > 52 us and
Normal Spectral scan.
Change-Id: I6b92fcd674ae95bcd0a23892ef9ccc6ba487d6ad
CRs-Fixed: 3140890
The qcacld driver does not register ol_if_ops callbacks
to handle wds AST request.
Call target if APIs directly to add, delete, and update
the AST entries for the WDS stations.
Change-Id: Ib4d5e1fdd6598e3390dbd2be0f24a72ccf01f202
CRs-Fixed: 3133839
Use CONFIG_REG_ 6G_PWR_MODE for the new API.
Use "_for_pwrmode" as suffix for the new functions.
Change-Id: I9b84944a59062277b76bc48877c47ea5afada0ec
CRs-Fixed: 3133023
The consumers of the current channel list may want to search through 6G
channels that are not part of current channel list and belong to channel
list of different power mode.
Therefore, replace the regulatory current channel list with that of 6G
power based channel list.
Change-Id: Ie2ff8bbfb50a5f95f584b134b18246cb28b1c406
CRs-Fixed: 3110987
Include relevant header for MAX_SESSIONS and use
the correct build flag to retrieve session params.
CRs-Fixed: 3136148
Change-Id: I28ef98a67cbe479c5d8be93c49f9ae6ce63ba982
Add support for EHT PPE threshold's. Store 2G and 5G thresholds received
in service ready. Fill peer PPE thresholds for EHT peer.
Change-Id: Id5c8310cbf34c59a3d88072b37ce3f871354ed17
CRs-Fixed: 3128586
Firmware doesn't expect any vdev commands from host while RSO stop
is happening. It sends a response to the RSO_STOP command once
it's done with cleanup. Host needs to run a timer and wait for a
maximum of 6 seconds for the response. Host can stop the timer and
allow the commands to firmware in the below cases,
1. RSO_STOP response with success status
2. RSO_STOP response with HO_FAIL status followed by
HO_FAIL event: Host needs to wait till HO_FAIL event is
received
If firmware doesn't send any response in the 6 seconds wait, issue
a recovery to help to check the firmware state.
Change-Id: I4577f9b0aac71c0c86bd32b59e69d9527bf107b9
CRs-Fixed: 3106032
MCL host only has one pdev with pdev id as 0. If pdev id indicated
from FW is bigger than 0, MCL will not get pdev. Get pdev with pdev
id 0 in this case.
Change-Id: Ie43fc2d78d31ebaa3f32076704d81439f1d46830
Remove Legacy Qwrap max client mode code as part of Legacy
RE code cleanup. Old change (same code changes as new) was
reverted as some PF checks were missing/skipped before merge
due to an IT issue
Safe to merge now as IT issue has been resolved and all PF
checks are enabled again before merge.
Change-Id: I2f6ae57a27d50c31115d89e57281dc1f7094d71d
CRs-Fixed: 3125196
While copying FFT bins from the target, Spectral Host driver reads
one DWORD (32-bits) at a time and extracts FFT bins out of those DWORDs.
This extraction uses standard bit shift and mask operations as below.
#define QDF_GET_BITS(_val, _index, _num_bits) \
(((_val) >> (_index)) & ((1 << (_num_bits)) - 1))
For a chipset that uses pack mode 0 i.e., packs 1 FFT bin per DWORD,
_num_bits in the above operation will be 32. So, we try to left shift the
integer constant '1' by 32. If the integer constant is represented by
32-bit integer, we could have issues in the result of shift operation.
As per C standard, the result of shifting an operand by a count greater
than or equal to width (in bits) of the operand is undefined.
This is because some platforms could optimize the shift operation by
masking the shift count to 5 bits. That means, the shift actually
performed is 32 & 31, which is 0.
Fix this by using 64-bit integer constant '1' in the above operation.
Change-Id: Ic7fe4de7917f3069d78a2ff29d86009cbf381e3f
CRs-Fixed: 3125158
Currently, qdf_spin_lock/qdf_spin_unlock is used to protect
spectral_lock. This can lead to a deadlock when the process
context is holding the lock and gets pre-empted by the tasklet.
To avoid this use qdf_spin_lock_bh/qdf_spin_unlock_bh.
Change-Id: Ibd2be7b7f3faf2dea9d7df8d6468c7a8fda512f2
CRs-Fixed: 3124199
Add change to fetch and save the WMI service capability of FW to
support multi AST delete using service bit.
Change-Id: I038073085dca1370bafe691b6b0ba8c4476be7a2
CRs-Fixed: 3118892
