As part of default enablement of output tx type sw fence,
add this support in driver to disable fence based on
below conditions for INPUT_PSC propertities:
- If session is interlace type
- If OUTPUT_ORDER is 0 and HFI_PROP_MAX_NUM_REORDER_FRAMES > 0
Change-Id: If861129ba96329c0277a9c9698f67baf25e5d82e
Signed-off-by: Akshata Sahukar <quic_asahukar@quicinc.com>
Remove deinit sequence calls and register devm
managed callbacks, so that kernel can invoke
then, when dev scope ends and cleansup all
associated resources.
Change-Id: I729fd21fe32d9f39240d0b743f910409d93a00c5
Signed-off-by: Govindaraj Rajagopal <quic_grajagop@quicinc.com>
This is resolve some of this kind of checker err.
Change-Id: Ief665e17045c3b6a6ff636ab6404c6e0c93e9460
Signed-off-by: Ankush Mitra <quic_ankumitr@quicinc.com>
- Introduce new control to set HEIC encoder tile size from HAL
- Support 1k x 1k tile encoding along with existing 512 x 512
tiling
Change-Id: Iaeffe421f8311d818695c3ae9af7cabcc8892043
Signed-off-by: Akshata Sahukar <quic_asahukar@quicinc.com>
Move private controls from each platform source files to
common header file
Change-Id: I22d8aa7f81919d950eed6b1f4ccd020c803a7ce9
Signed-off-by: Ashish Patil <quic_ashpat@quicinc.com>
Client is setting NV12 fmt as OP format before initial reconfig
So during input port stream_on, subscribe_input_property is
failing due to ubwc check(NV12 fmt), so DPB_LIST cap is getting
disabled, but later client is setting NV12C during reconfig.
So msm_vdec_release_nonref_buffers() during qbuf is bypassed and
release cmd is never sent to fw for pending ro buffers. Infact
entire RO handling at driver side is disabled.
Looks like due to some reason client was not requeueing same
buffers at same slot, So eventually number of pending RO buffers
increasing over the time. Once count shoots more than 256 fw
assertion happens and i.e leading to system error.
Remove UBWC check while subscribing input port properties, so
DPB_LIST willbe subscribed always and avoids above mentioned
issues.
Change-Id: I57ea0ea637ae3a57fcad430b212dcdb10f8e6d0f
Signed-off-by: Govindaraj Rajagopal <quic_grajagop@quicinc.com>
Remove HEIC codec definition from UAPI and use it as private
codec type
Change-Id: I4023b638f56e9db11c74ae8894f8451ada05c6e8
Signed-off-by: Akshata Sahukar <quic_asahukar@quicinc.com>
Add driver version for clients to query and manage
accordginly.
Change-Id: I5e8c51a4f18c28c0ed4d5a8bdaf0660d175c420a
Signed-off-by: Maheshwar Ajja <quic_majja@quicinc.com>
Add Synx V2 fences support to improve latency
in video decode usecases.
Change-Id: If21f8b65895364a804f8e03580b09c44b377c199
Signed-off-by: Akshata Sahukar <quic_asahukar@quicinc.com>
- Replace prior macros from downstream driver as these are now
defined in upstream V4l2 include files
Change-Id: I34dc063df0c2ca2194c115d310d7fe5026cd573e
Signed-off-by: Deepa Guthyappa Madivalara <quic_dmadival@quicinc.com>
Replace prior macros from downstream driver as these are now
defined in upstream V4l2 include files
Change-Id: I7d1677cd7ef95c05219e043e0c78d29299036bed
Signed-off-by: Deepa Guthyappa Madivalara <quic_dmadival@quicinc.com>
Introduce a control for client to enable or disable
csc. Disable csc for 10-bit encoding based on color format.
Change-Id: Ia49324332ce9b05b6f1a1283fa758638a8cc3ab8
Signed-off-by: Darshana Patil <quic_darshana@quicinc.com>
1. Move DPB_LIST subscription on input
port instead of output port.
2. Move decoder port PSC and properties
to platform data.
Change-Id: I5711e0ba915ebe4136f64d1440ae331b787f4d61
Signed-off-by: Zhongbo Shi <quic_zhongbos@quicinc.com>
remove all conditional compilation in video driver.
With this change, all files willbe always compiled
and will be available in final kernel object file.
Change-Id: I9843c246e23bd1ee4fb8918e5cfa840e2defd432
Signed-off-by: Govindaraj Rajagopal <quic_grajagop@quicinc.com>
New bandwidth and frequency calculation functions
for kalama.
Change-Id: Iaca0be832c42e00bb7404f7cfbac5bbf03427144
Signed-off-by: Ashish Patil <quic_ashpat@quicinc.com>
Restrict all intra encode support to 4k@30 fps from 4k@60 fps.
Change-Id: If77d391ccfe4453fc37de369a9ca5923a39c9c26
Signed-off-by: Akshata Sahukar <quic_asahukar@quicinc.com>
- introduce control to set colorspace. client will use this
to set private color info.
Change-Id: I0099ef1525f4562d3be3a6e518d046fe5b9ef894
Signed-off-by: Darshana Patil <quic_darshana@quicinc.com>
Add support to allow 5 LTR count as per new
requirement.
Change-Id: Ic839ea61ae8dfe21bd8891f0f0dbaf26506d84ec
Signed-off-by: Akshata Sahukar <quic_asahukar@quicinc.com>
- remove support of dynamic layer change for CBR
- remove support of layerwise bitrate
- any dynamic layer change request ignored without error for CBR_*FR cases
- layerwise bitrate is mapped to cumulative bitrate
Change-Id: I96c70fabd3c2bf94ce989b9e94620c166892b8e6
Signed-off-by: Ashish Patil <quic_ashpat@quicinc.com>
Added changes to support generic power domain and opp table.
This is an alternative for downstream regulator framework.
power domain can be enabled using below dtsi entries.
power-domains =
<&videocc MVS0C_GDSC>,
<&videocc MVS0_GDSC>,
<&rpmhpd SM8450_MXC>,
<&rpmhpd SM8450_MMCX>
power-domain-names =
"iris-ctl", "vcodec", "mx", "mmcx";
Power domain handles willbe parsed at driver side using below api's.
- dev_pm_domain_attach_by_name()
- devm_pm_opp_attach_genpd()
devm_pm_opp_attach_genpd() provides consumer virtual device handles
and i.e linked to core->dev using device_link_add().
MXC, MMCX rails wilbe powered up by scaling desired rate using
dev_pm_opp_set_rate().
Change-Id: I3d73434cb772078f031aec7cadc2d42ab930edd0
Signed-off-by: Govindaraj Rajagopal <quic_grajagop@quicinc.com>
update copyright markings to 2023 in all files.
Change-Id: I6842d56c4a8fff6a7a93d0c1d4bc049041297b02
Signed-off-by: Darshana Patil <quic_darshana@quicinc.com>
Use devm_reset_control_get_exclusive_released() instead of
devm_reset_control_get() to get the reset control of video_xo_reset
clock as it is shared reset clock between eva and video drivers.
Use reset_control_acquire() before assert and reset_control_release()
after de-assert video_xo_reset clock to avoid eva driver operating on
it in parallel.
Change-Id: I4936ed7a4556bb56d4b28546084fc877080308ef
Signed-off-by: Deepa Guthyappa Madivalara <quic_dmadival@quicinc.com>
Signed-off-by: Darshana Patil <quic_darshana@quicinc.com>
This is change 2 of the Prepare dependency list without
parent change.
In this change we remove all parent information from
the CAP database.
Change-Id: Ie0b878050ae2d24e3c1a41cbd579ef0f19d42250
Signed-off-by: Ankush Mitra <quic_ankumitr@quicinc.com>
Prepare dependency list only using children.
Change-Id: Id79487825fed1f121821126589594b64820c85d3
Signed-off-by: Ankush Mitra <quic_ankumitr@quicinc.com>
Upstream driver doesn't support context bank address ranges,
so add dma mask attribute to context bank to specify address
range for upstream driver.
Change-Id: I09191b500006d6c7abf364fbfa22377b480a4b4d
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Re-structure the memory_ops code so that
upstream driver use mem_ops defined on
msm_vidc_memory.c and downstream driver
use mem_ops defined on msm_vidc_memory_ext.c.
It helps to modularize the code even further.
Change-Id: Id00b0872d7a902a8540500df5efb5f546a9dbe41
Signed-off-by: Ankush Mitra <quic_ankumitr@quicinc.com>
add memory ops support so that different
implementations can exist for memory_alloc,
memory_free, memory_map and memory_unmap,
dma buf attach, detach, map, unmap and
get buffer region in upstream and downstream
drivers.
Change-Id: Ifabc34e7a8b0284579c1bc4a8f477fe558d068f4
Signed-off-by: Darshana Patil <quic_darshana@quicinc.com>
Only keep minimal entries in dtsi, which is essential for
other drivers usage. Move remaining all data into platform
resource file.
Remove device_tree dependency and maintain platform_data
to initialize resources like regulators, interconnects,
clocks, reset_clocks, subcaches and context_banks.
Read static data like freq_table, firmware_name, pas_id
also from platform_data instead of from dtsi.
Change-Id: I73a1df10b92c55e55b23e538aea62598a7250ab4
Signed-off-by: Govindaraj Rajagopal <quic_grajagop@quicinc.com>
Remove inclusion of non standard header file of_common.h and
related APIs from upstream database and common file.
Include it only in downstream databse file.
Change-Id: I22140c54de38afca8058198c49d9fecdceaad67a
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Introduce SUPPORTS_REQUESTS cap to have different caps support
for upstream and downstream driver.
Change-Id: Ib8bae21ba3fa6d65236954e0728fa30e20d7b375
Signed-off-by: Akshata Sahukar <quic_asahukar@quicinc.com>
