Address the following issues in the dp folder:
CHECK: 'availble' may be misspelled - perhaps 'available'?
CHECK: 'catagory' may be misspelled - perhaps 'category'?
CHECK: 'endianess' may be misspelled - perhaps 'endianness'?
CHECK: 'exceded' may be misspelled - perhaps 'exceeded'?
CHECK: 'explicitely' may be misspelled - perhaps 'explicitly'?
CHECK: 'Inteface' may be misspelled - perhaps 'Interface'?
CHECK: 'lengh' may be misspelled - perhaps 'length'?
CHECK: 'messsages' may be misspelled - perhaps 'messages'?
CHECK: 'miscelleneous' may be misspelled - perhaps 'miscellaneous'?
CHECK: 'Ouput' may be misspelled - perhaps 'Output'?
CHECK: 'poiter' may be misspelled - perhaps 'pointer'?
CHECK: 'Poiter' may be misspelled - perhaps 'Pointer'?
CHECK: 'psuedo' may be misspelled - perhaps 'pseudo'?
CHECK: 'registerd' may be misspelled - perhaps 'registered'?
CHECK: 'requred' may be misspelled - perhaps 'required'?
CHECK: 'retreive' may be misspelled - perhaps 'retrieve'?
CHECK: 'succesfully' may be misspelled - perhaps 'successfully'?
CHECK: 'vaild' may be misspelled - perhaps 'valid'?
CHECK: 'virtaul' may be misspelled - perhaps 'virtual'?
Change-Id: I66b9cdc6115dd133b385e60c9d02cefd1bd0bac3
CRs-Fixed: 2241574
Drop MPDUs received with rxdma_overflow_err, rxdma_flush
or rxdma_mpdu_length_err errors on monitor RXDMA2SW ring
since Rx TLVs are not populated properly by HW.
Change-Id: I3d4399f4c2b4bbe21e9f6b1b24369a633e964154
CRs-Fixed: 2233141
In case of raw mode HW does not set the l2 header offset.
ignore this field in rx for rawmode.
Change-Id: I6e08a9540f55fdb97b21e4939256e6e5b9076e77
CRs-Fixed: 2243850
HMWDS for legacy was broken during bring up of DBDC on Hawkeye
platform.
Add cmn_tx_ops to support add, delete and update of AST entries.
Change-Id: Ia2a465a1f5f3d304a35d02c33bff73c56bb010a3
CRs-Fixed: 2225830
"(" character should not appear in macro parameter list. Remove
this illegal character to avoid compiling error.
CRs-Fixed: 2239574
Change-Id: Ie50feb5dacda52edb0b1a4fcdfd516e909c7bda8
Add sanity checks for pool id & index extracted
from the SW cookie field within buf_addr_info.
Change-Id: Icf21b94fa05f6f8887b8c7a17896348f25436dda
CRs-Fixed: 2220030
In VHT case, for some packets SGI value is 3, which
represent 3.2us value. Which is not applicable for VHT.
So if value 3 received from HW for SGI, than convert that
to default value, which is 0.4us.
Change-Id: I92716f8041f0db20b60dcd5e5d6681fa1bfa708f
Set pdev mask in the HTT Stats request based on
mac id number provided from the user.
Change-Id: Ie8f1208fd3598efd2ea3736719c8b444ef86881a
CRs-Fixed: 2237467
Enable multiqueue on VAP with 4 Tx and Rx queues in lithium.
In Rx path set the rx queue of skb based on the reo ring id on which it
is received.
In Tx path use the queue_mapping of skb to map to the hardware Tx ring
on which it has to be transmitted.
Change-Id: I103a21e91d1ed5c0e1d8441863d4fcd273b7bed9
Cleaned raw mode specific code and moved the rx
processing to single API dp_rx_sg_create
Change-Id: I7696786d9a0f10983d3299956b46b2ec76b388a5
CRs-fixed: 2204824
There may be race condition in setting htt included when tx desciptors
getting prepared in two cpu cores. This is fixed by not setting the
bit globally.
Change-Id: I861cb2f0cf51a5a14a8fb6fbc6b64b00b82af675
CRs-Fixed: 2229350
Return buffer manager for error packets has been changed
from HAL_RX_BUF_RBM_SW3_BM to HAL_RX_BUF_RBM_SW1_BM.
Fix is to use DP_WBM2SW_RBM to check correct rbm.
Change-Id: Ib5ffe7161f85fe6a374f16a06a1f6f4f701abe0b
CRs-Fixed: 2231571
Remove NAWDS Rx Drop Count as it is not required,
drop packets in rx where length is not
available.
Change-Id: Ib4b41eefe88410137c3845090783ee43adb9147c
CRs-Fixed: 2191474
Avoid vdev aggregate stats for every ppdu stats event as it is
consuming high CPU in veriwave max clients testcase. Instead
aggregate the stats when ifconfig athX command is issued. Add
CDP API to aggregate and update stats called when needed
Change-Id: I801d5f8fab0c275942b77a9975293f95bd4026b0
CRs-Fixed: 2220704
While doing RX NSS statistics counting, only MU_MIMO and MU_OFDMA_
MIMO frames are taken into consideration. So all NSS counter for
SU frames are missed.
Add RX NSS statistics counting for SU frames.
CRs-Fixed: 2228332
Change-Id: I5ee9b8f03177d31f5891a2e4e616b5740fec35f6
Make sure to clear the tx_desc->flags field before putting the tx_desc to
free pool. This was not takencare in V2 flow_control implementation.
Change-Id: I666b9b09de62d52cffc45e2b6db3a6be06d688e8
CRs-Fixed: 2186884
In flow control V2, dp_tx_flow_pool_vdev_unmap marks flow_pool_id as
INVALID_FLOW_ID. To free descriptors inside pool dp_tx_desc_pool_free
uses flow_pool_id to get hold of pool.
Change-Id: I892052055b34638a1ba876fac6bfcd2ae3b0d5b3
CRs-Fixed: 2228943
Initialize the peer map and peer hash memory based on the config
received from target in service ready event
Change-Id: I8e1b62cd9586f5b2be7acb863a106d2486be1b35
CRs-Fixed: 2223428
a) Configure RXDMA_MONITOR_STATUS to support mpdu_start.
b) Need Monitor other filter in RXDMA_MONITOR_STATUS
to support monitor vap.
Change-Id: I7ac90203f085850906f8c55209a57bb6a5464098
nbufs received on wbm_release ring were chained based on
first_msdu and last_msdu bits if the peer is invalid for these
frames, but these fields in the rx tlv header were in-correct as
hardware does not decap these msdu's.
Based on inputs from firmware we now changed this logic to
using phy_ppdu_id field from the rx_mpdu_start tlv & rx_attention tlv.
Change-Id: Ifc7faa2d1b0585bcc226e5cb2045fcb29d152273
Fill htt msg length before the htt stats response
handler so that the wifistats tool can read the
htt msg data correctly.
Change-Id: I544d1b97c8d74a0115a4a5a509780a6e9c273ab7
CRs-Fixed: 2231948
Update function prototype of dp_ppdu_stats_ind_handler. It should be
same when WDI_EVENT_ENABLE is defined and not defined.
Change-Id: I390d35b3b9f5f283fc3b960f00563fb997ef7f95
CRs-Fixed: 2230955
Add option to ignore vdev_id match to peer hash lookup API
when vdev_id is passed as 0xff to the API, it ignores vdev_id
argument
This option is needed for usecases like peer level statistics
display where only MAC address is known and vdev_id is not known
Also add the missing accounting of rx broadcast frames in the
overall statistics
Change-Id: I9939ac8bf30f6be3d216f9aa28d52560bf445e06
As many as 5 vdevs can be created, which is defined by MAX_SME_SESSIONS.
But flow control pools are only valid for active TxRx capable vdevs.
which is 3 active vdevs. So attach flow pool creation to vdev_start
instead of vdev_attach.
Change-Id: I137676ba618aa3a6684c7d17ef7d9263c4df6efe
CRs-Fixed: 2220079
Add support in DP WDS source port learning handler to kickout a STA,
when direct associated peer(SA) roams to another AP/Repeater and
reachable via TA peer
Change-Id: I84d0b92c9b4e39c05f4d7c25b3f5afb1d535ca02
CRs-Fixed: 2219924
AMPDU flag check is not present when radiotap header is updated.
This fix will check for rs_flags to check and set AMPDU present
Change-Id: I9e0a703a46459b1013af092f8cb8b7cd35f1a3ce
CRs-Fixed: 2204278
