Add the following WMM BE VO ini configs to MLME cfg:
1. CFG_QOS_WMM_INFRA_DIR_AC_BK_NAME
2. CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BK_NAME
3. CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BK_NAME
4. CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BK_NAME
5. CFG_QOS_WMM_INFRA_SBA_AC_BK_NAME
6. CFG_QOS_WMM_INFRA_UAPSD_BK_SRV_INTV_NAME
7. CFG_QOS_WMM_INFRA_UAPSD_BK_SUS_INTV_NAME
Introduce the basic infra APIs related to these configs
from mlme.
Change-Id: I1f8e6f0fa1ff15eda36a20ee06772c4a1ddd9ca8
CRs-Fixed: 2327690
Add the following WMM BE VO ini configs to MLME cfg:
1. CFG_QOS_WMM_INFRA_DIR_AC_BE_NAME
2. CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BE_NAME
3. CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BE_NAME
4. CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BE_NAME
5. CFG_QOS_WMM_INFRA_SBA_AC_BE_NAME
6. CFG_QOS_WMM_INFRA_UAPSD_BE_SRV_INTV_NAME
7. CFG_QOS_WMM_INFRA_UAPSD_BE_SUS_INTV_NAME
Introduce the basic infra APIs related to these configs
from mlme.
Change-Id: Ibaf06ba2df07a4805d31a4748809c44d143dd12e
CRs-Fixed: 2327689
Add the following WMM AC VI ini configs to MLME cfg:
1. CFG_QOS_WMM_INFRA_DIR_AC_VI_NAME
2. CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VI_NAME
3. CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VI_NAME
4. CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VI_NAME
5. CFG_QOS_WMM_INFRA_SBA_AC_VI_NAME
6. CFG_QOS_WMM_INFRA_UAPSD_VI_SRV_INTV_NAME
7. CFG_QOS_WMM_INFRA_UAPSD_VI_SUS_INTV_NAME
Introduce the basic infra APIs related to these configs
from mlme
Change-Id: I320f49b216659937dc7f708fdbb7849ae415e249
CRs-Fixed: 2327687
Correct the configuration check to enable/disable the Tx SU
beamformee setting in 20MHz mode operation.
Change-Id: I958d5319acf98931187304f2c6fe2a9aff5991b7
CRs-Fixed: 2343849
auth_failure_timeout is updated as part of
lim_check_and_announce_join_success for p2p client with NOA.
And the default value is stored in pe_session->defaultAuthFailureTimeout
After receiving the auth resp or in case of auth failure the
auth_failure_timeout is reset to default value. But there is any other
failure and pe session is deleted then the auth_failure_timeout is
not reset. And p2p cli connection will use the wrong auth timeout.
And can result in connection delay's if GO doesn't send the auth response.
Reset the auth_failure_timeout to defalut as part of pe_delete_session.
And decrease the max value to 5000ms.
Change-Id: I374bf45279f086127ef062b83a06049c895c4675
CRs-Fixed: 2343832
There are two cfg setting parameters defined for SU Tx beamformer
and improperly updated the cfg settings hence the Tx beamformer
capability advertised as unsupported always.
Remove the redundant setting for SU Tx beamformer and update the cfg
with correct values.
Change-Id: I422179ae87ab5c561f0356bcab4585fbdc53c0bd
CRs-Fixed: 2343090
Remove legacy cfg items definitions and related macros for the
converged CFG items.
Change-Id: I12944f50d68dafe989417dda777f29a6233c97a4
CRs-Fixed: 2340856
Remove the definition of following INI & CFG Items
for VHT caps which is common for HT and HE caps.
CFG_VHT_LDPC_CODING_CAP
CFG_VHT_SHORT_GI_80MHZ
CFG_VHT_SHORT_GI_160_AND_80_PLUS_80MHZ
CFG_VHT_TXSTBC
CFG_VHT_RXSTBC
CFG_VHT_RX_MCS_MAP
CFG_VHT_TX_MCS_MAP
CFG_VHT_BASIC_MCS_SET
Change-Id: I55390c3391a0be272c609030dae232d767111fcf
CRs-Fixed: 2333183
Wireless application needs to tune parameters per AC based.
Such as VI/VO queue use the different re-transmission attempts
while other queue keeps the default value. It helps to improve
the video/audio performance in noisy environment. this change
add the ability to config re-transmission attempts of non
aggregation QOS packets.
Change-Id: I95404302463275803e3feff3038f04c900b14705
CRs-Fixed: 2323555
dot11p_mode is currently represented with a uint8_t type, despite an
appropriate enumerated type being available. Change the field's type to
the more restrictive 'enum dot11p_mode' instead of uint8_t.
Change-Id: I847ce0901297b0a3e4312e8ce4124a886320f174
CRs-Fixed: 2335575
In mlme_update_vht_cap, local structure is updated instead of
mlme global structure for vht caps and thus the mlme vht caps
contains only the default values.
Fix this by updating mlme vht caps in mlme_update_vht_cap.
Change-Id: Ifa3d30ae202f1a4b6361db1a504861918f7ebf2c
CRs-Fixed: 2334955
VHT Part3: Add the basic infra for MLME CFG items and the APIs
to be used from other components for VHT.
Change-Id: I8cd30439d7ac3de7b550aa5042353cf30e04cbda
CRs-Fixed: 2322304
Create and send user configurable ini for max number of roam preauth
retries and roam preauth no-ack timeout to the firmware.
Change-Id: I66808b33f421f56cd7c007cdde1db19c8e7ca5f9
CRs-Fixed: 2279049
Add the basic infra for MLME CFG items and the APIs to be used from
other components for VHT - Part-2
Change-Id: I8f9c8286861c5a7b17d0261cad6c51b431e86f4a
CRs-Fixed: 2322302
Replace usage of the below INI Items using MLME CFG instead of HDD config.
gPreventLinkDown
gSelect5GHzMargin
gEnableMemDeepSleep
gEnableCckTxFirOverride
gEnableForceTargetAssert
gEnableLpassSupport
Change-Id: Ib89272c7898db8d0c70a60640e00ca9364a9db74
CRs-Fixed: 2327025
Add the following WMM AC VO ini configs to MLME cfg:
1. CFG_QOS_WMM_INFRA_DIR_AC_VO_NAME
2. CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VO_NAME
3. CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VO_NAME
4. CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VO_NAME
5. CFG_QOS_WMM_INFRA_SBA_AC_VO_NAME
6. CFG_QOS_WMM_INFRA_UAPSD_VO_SRV_INTV_NAME
7. CFG_QOS_WMM_INFRA_UAPSD_VO_SUS_INTV_NAME
Introduce the basic infra APIs related to these configs
from mlme.
Change-Id: I402ff46aad528d7c4bbaa794b6fba498439f8e97
CRs-Fixed: 2327048
Add the basic infra for MLME CFG items and the APIs to be used from
other components for VHT - Part-1.
Change-Id: Ie74bfd42ed3d34cc218f20ee3f9d81dc6af02172
CRs-Fixed: 2322300
gEnableEarlyStopScan is for early stop feature. Since it’s based
on rssi only, make the default value 0 on score enabled code
base.
Change-Id: Ie0e0483359d5a7e2cc969001af03500c9e8209c6
CRs-Fixed: 2311372
Remove the legacy definitions that are related to the WEP
cfg.
Move them to mlme component
Change-Id: Ibcec8adf15123d12ad7c2eb6ed770b44a093673a
CRs-Fixed: 2324046
Add mlme cfg api functions to get EDCA parameters.
Also remove the legacy CFG item definitions.
Change-Id: I075240279e2cf3fda4424b77b7cfcf50ac9619f4
CRs-Fixed: 2316205
Add CFG items of RTT and PMF as generic items based
on converged cfg component.
Change-Id: Ic95d1e7b052259149704d9faf65ebe5f51536fdf
CRs-Fixed: 2313281
Remove the legacy macro definitions that are related to the
mlme cfg.
Move them to wlan_mlme_public_struct.h
Change-Id: I64f474512463d3ba7ac238b2efd0f4cf2e36999b
CRs-Fixed: 2317750
Rename mlme_update APIs in wlan_mlme_main.c to mlme_init as these
APIs initialize the MLME structures and init is a more appropriate
for these APIs.
Also re-order defines in CFG_MLME_ALL to be in alphabetic order
similar to CFG_ALL
Change-Id: Ia8e10d86c62cc46230ef4c3d51c9588eaa1a5477
CRs-Fixed: 2318497
Implement the usage of MLME CFG infra for BSS Scoring related INI Items
and remove the older INI definitions from HDD.
Change-Id: I0db69138f0439131916a38176b5b21b706ff3671
CRs-Fixed: 2318320
Define mlme lfr configures based on converged cfg component, add
APIs to get and set mlme lfr configurations.
Change-Id: I8aa9b37d1b943fcdc6a84704ede37b19cd7cffb8
CRs-Fixed: 2316490
Add the MBO ini configs to mlme for the following:
1. CFG_MBO_CANDIDATE_RSSI_THRESHOLD
2. CFG_MBO_CURRENT_RSSI_THRESHOLD
3. CFG_MBO_CUR_RSSI_MCC_THRESHOLD
4. CFG_MBO_CAND_RSSI_BTC_THRESHOLD
Change-Id: I9e779c912538973c8281170ec8c212a4f05b7e2e
CRs-Fixed: 2314168
Define mlme sta configures based on converged cfg component, add
APIs to get and set mlme sta configurations.
Change-Id: I1a03037081ebe27760d23405adc3cc9042ba7698
CRs-Fixed: 2312002
Remove the legacy INI code from hdd_cfg. Replace the existing
access from hdd_config with new mlme api.
Change-Id: Iddde15330c1ad39a59bd9a3c7ea86af971df61b5
CRs-Fixed: 2313296
