Firmware generates wmi Rx diag events every few milliseconds,
and processing the same in system shared work queue may lead to
work queue lock-up detection. Hence, move Rx diag event processing
to dedicated work queue.
Change-Id: I10cdde317794e35bc6d10677ab76ea24a66e1880
CRs-Fixed: 2941409
Add new ini's for assoc active and passive dwell time
for 6g. These will be applied if STA is connected.
Change-Id: I680fbd3038968ecf6ff9920fff982456135bfd77
CRs-Fixed: 2941359
Even though HP/TP updates are posted writes at CPU level, they
are getting blocked until soc comes out retention which is hogging
CPU.
To avoid this if EP is in low power state update HP/TP writes from
delayed work context. In delayed work vote for EP awake wait till it
comes out low power state and then proceed to HP/TP update.
Change-Id: I61d5795f58f25f850b5a9ad4d30e3181dba23713
CRs-Fixed: 2913495
In monitor mode, when the channel is set to any 2G band channel
the mac_id passed to dp_mon_process API is 1. As part of
dp_rx_buffers_replenish, refill history is logged and the
mac_id is used to index into the history array. The array is
of size 1 and OOB access would happen when ring_num which
is the mac_id, passed in is 1.
Fix is to pass the pdev->lmac_id instead to
dp_rx_refill_ring_record_entry and add ring_num sanity check.
Change-Id: Id824ec8b01e7923ad74771d5f34a25f5fccb65f3
CRs-Fixed: 2939544
For every channel change, a print is displayed onto console.
reduce log level to suppress print.
CRs-Fixed: 2921656
Change-Id: Ib300ecc17c09412aa6502cc45ec1c4b7da3b54ce
In cm_update_scan_db_on_connect_success, the current candidate is
always retrieved from connect req even when the resp is for reassoc
this can lead to invalid pointer access.
Fix this by getting current candidate from roam command for reassoc
resp.
Change-Id: I99afc49abd7581cf43279654a5fe1e67e2448bd0
CRs-Fixed: 2941836
In some of the targets modulo operator assembly API's
are not defined causing compilation error.
To avoid this use qdf based API's for modulo operations.
Change-Id: Ibc69b69aa38cadff5daa8dee8b65ceaacfe997b7
CRs-Fixed: 2940281
When obss scan is enabled, FW will trigger scan periodically by
a timer. If a scan was triggered, FW need to access host memory
for data transfer. Occasionally, suspend may happen during one
scan, then FW is unable to access host memory and fw will crash.
So disable the obss scan before suspend.
Change-Id: Ie507da929a3701473cb57888e96e702e34d4c95a
CRs-Fixed: 2927239
Allow object manager logging in console only for WIN as
it's a critical print. For MCC, this print will not be
logged to avoid console lock and excessive logging.
Change-Id: I09b6dc80486cfa727c130f3fe205f504a46dd0c0
CRs-Fixed: 2938507
In perf builds, add a ksize check and call qdf_mem_prealloc_put()
only when size is greater than 4K to avoid lookup overhead.
Change-Id: If01a7cbeaf1ee7f514f16296340169a937dafa78
CRs-Fixed: 2936464
Logs are printed inside a spinlock which was held for
losing more than 2 seconds.
To fix this, reducing log level so it is not printed
in the console and instead in driver logs.
Change-Id: Ib510ddc1b5bff63db012b45ffa0280eedc356cc6
CRs-Fixed: 2938590
If MBSSID ie contains only header and no payload
then current logic can cause OOB read.
Added validation check for length of IE before
accessing MBSSID IE payload.
Change-Id: Id8b34e5f516f1a1c85bc7d93d9128cad29393e9d
CRs-Fixed: 2838631
hal_get_entrysize_from_srng returns the entry size
in dwords but the caller expects in bytes. This results
in insufficient data to be recorded for CE event.
Fix is to left shift the entry size by two bits in
hal_get_entrysize_from_srng so that the entry size
value returned is in bytes.
Change-Id: If532da7abe5ce9c293969f0052455085f18b1926
CRs-Fixed: 2935196
Fill the primary 160MHz segment centers (mhz, ieee) for a 320MHz
channel in the given channel param.
Change-Id: I422bc90fabd2e2ecaa6732a6719218fcc18c19f2
When unregistering wmi handlers, the position of the
old handler is replaced with the last handler in the table.
But at this stage only handler was getting replaced, but
not the context. Hence, make sure to update the context
as well.
Change-Id: If90ea9d7663fb105e8e8ad7d7e6c70da20264e44
Add the history support to log Tx descriptors programmed
in Tx and completion HW rings.
Change-Id: I60954c93e2595e7dad1251c459eed8afc761e917
CRs-Fixed: 2924614
Firmware sends control frames in same wmi path as mgmt
frames. Currently, these frames will be dropped by mgmt
txrx component, so add support to handle control frames
in mgmt txrx component.
Change-Id: Ia046c1b3b25d40429a859e9c2659126b3d5eb3c0
CRs-Fixed: 2932123
Depreciated IPA APIs are currently getting compiled.
To fix this, adding linux kernel version check
Change-Id: I2288db34c09d60047c67a5df9081de08a6c2f62b
CRs-Fixed: 2927413
With the addition of MLO_SYNC_WAIT substate, now the active status
of the VDEV will be indicated by ACTIVE substate under UP state.
Add API to check if a given vdev is in UP_ACTIVE state.
Change-Id: Ia858765b07582f89e0eaa041d56c7f2aae6f1528
CRs-Fixed: 2924322
Fill peer assoc mlo params in peer assoc request command.
Also add definitions to the WMI_SERVICE_11BE.
Change-Id: Ied7959e022ee27f3bd698b84dc801491175f85b3
CRs-Fixed: 2934417
When host failed to find out vaddr by paddr from FW, output more
information for debug further.
Change-Id: I65c4965c12c2ffa3fe2a26a82df01d1b91501c73
CRs-Fixed: 2925194
issue happen when wpa_supplicant is creating vdev
and schedule_thread is destroy the same vdev.
if state is not WLAN_OBJ_STATE_LOGICALLY_DELETED,
return back here, otherwise it will cause the creating
vdev_id to be invalid.
Change-Id: I574838bca574add497f1167c75ede44938b7bf17
CRs-Fixed: 2935068
Fisa packet history is around 6KB for each sw fisa
flow entry and this is part of the dp_fisa_rx_sw_ft
structure. The total size of the SW FT as a result is
around 830KB and the higher order memory allocation via
kzalloc for this could fail in low/fragmented memory
scenarios.
Fix is to allocate memory for FISA pkt history separately
and attach it to the SW FT entry.
Change-Id: I7296d7269c1b86ec38ea1668e8a0893335bbdb6f
CRs-Fixed: 2936353
Currently when updating the single pmk capability for an AP,
the driver only changes for the sae single pmk OUI advertised
by the AP and not the ini value. This causes the crypto entry
for the AP to be updated with single pmk flag to true even when
the ini is disabled.
So check the sae single pmk ini also to update the scan entry
as sae single pmk bss.
Change-Id: I2ae16c8da5af397b041723f9d5a3b2d8a6e7c986
CRs-Fixed: 2935440
Add an API to set the AP power type and then recompute the current
channel list.
Change-Id: Iacd4d3244f601836f3ed0eae725eaa6375a3584c
CRs-fixed: 2934625
In WMI_HOST_TP_SCALE, add an option to support 6% transmit power scale
configuration.
Change-Id: I11a67f0efd13ba2c7f2d8d546643a1af37f33613
CRs-Fixed: 2936987
When CE tasklets and NET_RX gets scheduled on same CPU,
NET_RX is throttling CE tasklet resulting WMI timeouts.
To avoid this affine CE irqs to gold cores, so that CE
tasklets will get enough CPU time.
Change-Id: Ided81a0565958aca6611eba911824c3485eca472
CRs-Fixed: 2933335
Add new reason code WMI_HOST_ADD_TWT_STATUS_SCAN_IN_PROGRESS
to handle add dialog rejection due to scan is in progress
at firmware.
Change-Id: I30c3d1096690bd0cb7a669206f087e006c23ea44
CRs-Fixed: 2923289
The earlier logic for scanning non-inheritance IE fails if
non transmitted bssid profile has any extension element
such as MU EDCA before the extension element with
non-inheritance IE.
Since MU EDCA is also an extension element and it does not
have noninheritance element id in it, the logic used to fail
as the driver does not check further for any other extension
element ID in non transmitted bssid profile. Because of this
the IEs part of non-inheritance list used to get inherited,
causing disconnection issue.
With current fix, the scanning for non-inheritance IE has been
taken care properly. Driver will go through the non transmitted
bssid profile until it finds the extension element with
non-inheritance element ID in it.
Change-Id: Ib4346600a880a8390c6d023cf403ed18c62406d2
CRs-Fixed: 2935065
Add country code check for ETSI domain, in other words
UK, since only UK supports 6G in EU as of today. The
TPC power calculation API calls this function to check
if programmed ctry is GB to allow STA to use VLP mode.
As and when more EU countries support 6G, the checks
will be appended to this API.
Change-Id: If985f3f64fc806cf1875f798ff3a86667a0861b8
CRs-Fixed: 2933678
Driver gets vdev by wlan_objmgr_pdev_get_first_vdev and returns wrong
vdev in some platforms, and then gets wrong channel/phy_mode. This
change gets vdev by id and fix this issue.
Change-Id: I814d516361238afbd0345bc362c286d1cb55a7d4
CRs-Fixed: 2933525
When enhanced stats are enabled/disabled, dp_mon_filter_update () API
sets/resets MON_BUF ring filters also, this is leading to connection issues
traffic stall on Rx side
Set/Reset MON_BUF ring filters when monitor mode is enabled
Change-Id: I0de7be81465b11224b95c0918b4e8c8e339e3802
add ssn_updates_count to dp_soc_stats rx err stats.
Also add bar fail count on rx tid update during
bar handling.
Change-Id: Ic9a963c8d29ace2087e63cba56bc0d7e40907e1a
CRs-Fixed: 2918806
When nbuf is freed via dp_rx_buffer_pool_nbuf_free, the
nbuf is enqueued to emerg_nbuf_q always even in the case
where the emerg_nbuf_q is not initialized. This will result
in NULL pointer dereference when any nbuf is enqueued to
emerg_nbuf_q.
Fix is to add initialization check before adding the nbuf
to emerg_nbuf_q and free the nbuf if emerg_nbuf_q is not
initialized.
Change-Id: I075b3b93203eec21d44ea3967b5f46d59c291a14
CRs-Fixed: 2934593
Previously, for high accuracy scan,
configured scan policy SCAN_DBS_POLICY_FORCE_NONDBS
takes more time to scan.
For DBS HW, to improve scan time, this should be
changed to SCAN_DBS_POLICY_DEFAULT.
Change-Id: I692e2a8b4fd9c97b526197edc57b830fa091a456
CRs-Fixed: 2927022
Add support for Rx refill ring history, maintain records of refill info
during RXDMA ring replenish.
Change-Id: I034014eacfc510ec6f416fca601fa864326de9c2
CRs-Fixed: 2930005
Currently, excess logging is causing a crash when enqueuing
of Tx MSDU descriptor to HW failed.
Rate limiting the log messages to avoid the crash.
Change-Id: Ibb230ce03c23518b6f7feda61a49bf155c7ddc69
CRs-Fixed: 2933002
Same WDI subscribe event can be added multiple times to event list
since this is triggered by user control this will result to undefined
behaviour during events handling.
To avoid this add check to detect duplicate entry before adding
to list and reset list elements once removed from list.
Change-Id: Iaf23927f8439d4ac503776b915a8fe8cb6abfec5
CRs-Fixed: 2931068
The object manager global lock is used in few
debug APIs. In these instances the log is taken
only on the local copy and the updates are happening
on the local copy without the lock.
So there is nothing that is protected by taking these locks
and there is also a scenario where this lock is resulting in
deadlock, so removing these locks.
Change-Id: I583de096538a5f9c87cbcfa2b267e82630f3278f
CRs-Fixed: 2930205
