Currently, max monitor status buffer count per ppdu is 32.
In case of multiclient test cases, number of status buffers per ppdu are
33 and leading to assert.
Increase per ppdu max monitor status buffer count 128 to take care of future
use cases like MU-MIMO, OFDMA.
Change-Id: I083304ef23a1d58af24062441d8ad9b2d229f7b1
CRs-Fixed: 3156689
Even if HW cookie conversion is enabled on KIWI, there is some
case HW cookie conversion might not be done by HW, check the cookie
conversion done bit and get Phy Address accordingly.
Change-Id: I4ee7ed9776086812774637f07da1e4504898c3c4
CRs-Fixed: 3153433
This feature can be enabled runtime using sysfs interface.
Support is added to dump and clear the histogram stats.
The lower delay regions has to be more granular to indicate any
medium related issues for time sensitive XR applications.
Change-Id: I0a44a54d12d92ce016de349810cb2bedebaf9a58
CRs-Fixed: 2981006
Populate rate index in user specific rx ppdu indication.
Also correct the computation of total retries in rx ppdu indication.
Change-Id: I07c55260def9d2f1490729b6390bca3d98085c63
CRs-Fixed: 3156428
Update the MPDU start and MSDU end word mask while setting
up rx monitor filter.
Change-Id: I17c5d809300cd2d4fc8d3b63d5e8a3d40f599a7a
CRs-Fixed: 3145449
Update dma length and mpdu logging for different packet
types while setting up monitor filter
Change-Id: I408860f15686c7999655c1e84dce5a3f7ffbbed7
CRs-Fixed: 3145400
Add support to send unit test command to FW to dump
stats on suspend failure due to pending tx completions.
Change-Id: I6afb69a862c366c66a1e1f3dc009964272dfb75a
CRs-Fixed: 3151458
Remove redundant field for rxmon global enable
and fix writing global enable field to correct
dword
Change-Id: I4efc0da559dce873bcb8721aeb0d7b7410b39dd9
CRs-Fixed: 3150784
Kiwi target does not used TX status ring.
Hence disable the tx status ring for Kiwi.
Change-Id: If3a39a0017a884bee2320188621b1f05e0c6d568
CRs-Fixed: 3150815
Kiwi target does not used TX cmd credit ring.
Hence disable the tx cmd credit ring for Kiwi.
Change-Id: Ibd5fe2905a7362ea2ab89e65d77c7aea6ab259ee
CRs-Fixed: 3150814
Few APs are sending bar frame right after sending a
packet but the packet is not received and its retry
is received with the same sequence number. As SSN
is moved ahead due to bar frame, this packet is being
dropped.
To fix this, allow all frames to get delivered to stack.
Change-Id: I17f7126c8d318415e88b037b72563cf53cb14066
CRs-Fixed: 3151908
Currently in some case we are receiving non error packets on REO2TCL
ring, which is causing issue.
Fix is to set DEST_RING_MAPPING_0 to SW1 for REO dest ctrl
register, So that non error packets with reo_destination_indication
with 0x0 in the reo entrance ring will be routed to SW1 ring.
Change-Id: I67f78f35e7dba899943307902d99d0325a60498f
CRs-Fixed: 3150186
Search flag addrX and addrY will be enabled for STA + TDLS case,
but currently TX bank profile is not updated which then STA still
use default TX bank profile - index based lookup search, TX might
fail.
Update bank profile with addrX and addrY search enabled.
Change-Id: I6af12d3707b59c5d4b4bba1fc5ec05a22bfcd984
CRs-Fixed: 3148759
get_log_timestamp API is being called unconditionally when passed as
an argument to dp_pkt_add_timestamp (even for empty calls) from
dp_tx_hw_enqueue_li. This adds significant load on CPU, hence avoid
get_log_timestamp call by using preprocessor directive.
Change-Id: I1d988597e28b755a767a267d1b578b2bcedc324e
CRs-Fixed: 3150795
Add support to change the tx_desc value to 65536. Some changes
to make the function argument as u32 type us made
Change-Id: I7cbde1b7ed4ab4e278c25c1ecfa94b7f673197f2
CRs-Fixed: 3130833
Add a separate APIs to configure RxDMA and RXOLE
configuration to enable the PPE based routing.
Change-Id: I95b8fbb361402bc04fc1f38aa8b0dbc6f99f4f06
CRs-Fixed: 3147720
Add the DP HTT RxDMA and RxOLE data types and their
respective configuration APIs.
Change-Id: I4ce423a31eab84764666b7d0f11815f4895898af
CRs-Fixed: 3147720
Make 1:1 dependency on num REOs and rx_thread. Keep num rx_thread
dependent on rx REO rings, 1 rx_thread for each rx REO ring.
Controlled via INI dp_reo_rings_map.
Change-Id: I7c199226cfa3f173ea328d71075816b8eb9ba91f
CRs-Fixed: 3048260
for a PPDU monitor status can be split across multiple status buffers,
If status buffer continuation is carried in next NAPI budget,
store ppdu status buffers to process in next reap context.
Change-Id: Id00646fa4edb55f3540e23ad327952bf0f5d9889
CRs-Fixed: 3147113
Currently HW TX queue HP value is updated for every TSO segment enqueue,
as a part of optimization update HP only for the last segment.
Change-Id: Ibe349a1e6f55932bf780e1f755f13841078a493f
CRs-Fixed: 3138142
prefetch certain nbuf fields and nbuf data fields, this
will ensure these fields are in cacheline by the next
iteration of the rx processing loop.
CRs-Fixed: 3146589
Change-Id: I69fd9a7800c7e881cf6635f329343195d19735c5
The per packet info feature can be enbaled to support enhanced
stats independent of mesh mode.
Change-Id: I852e7a958c520901b6f418d30deb53fa2f68fb68
CRs-Fixed: 3079000
In case of empty HW descriptor, sw cookie is not valid.
Instead, HW reports ppdu_drop_cnt, mpdu_drop_cnt and
tlv_drop_cnt.
Do not process sw desc, if it's empty HW desc indication.
In case of flush and trucanted PPDU, status buffer need to be discard,
added handling for same.
Change-Id: I1219f71645072bb9e0e80ff271fa354f305c7961
CRs-Fixed: 3144525
Add Legacy interrupt changes for QCN9224 target. Added code to calculate
hif group for DP interrupts and initialize legacy interrupts for the same.
Change-Id: I1b2f81905d3ce840fea172b13cbd192f041913d4
CRs-Fixed: 3139986
Add feature support to tag first packet that wakes up HOST from WoW.
rx_pkt_tlv.rx_msdu_end.reserved_1a field is used by TARGET to meet
such request.
Change-Id: I3d37e13e8cff49bc4f622d3070a19e4c4be56417
CRs-Fixed: 3137621
As part of TX FW metadata V2 global sequence number based
and SVC ID based support added.
Change-Id: Iefee2c47ecbebf6edfec9a687ef67e0e270bbf06
CRs-Fixed: 3136931
Intrabss check for NAWDS was added as a temporary fix to resolve the
issue of selfbridge enteries present in AST table. The actual reason
is loopback pkt received with one's own bridge mac. To avoid this, add
a check for not sending out any packet with an invalid peer id in the
ast table.
Change-Id: Ia4c520bcc8b7077f0b484a0bc40c4d26db77c3f4
CRs-Fixed: 3135142
There is a possible race condition that target_start can be
called during load unload leading to htt_srng_setup being
called before monitor srngs are initialized. This check will
prevent the srng_setup_call from soc_start. The rings will
subsequently be initialized when monitor modle is loaded.
Change-Id: Ie697b45425e38e6d709b7466bb495a20bef4f820
CRs-Fixed: 3125255
The qcacld driver does not register ol_if_ops callbacks
to handle wds AST request.
Call target if APIs directly to add, delete, and update
the AST entries for the WDS stations.
Change-Id: Ib4d5e1fdd6598e3390dbd2be0f24a72ccf01f202
CRs-Fixed: 3133839
Calls to Rx-tlv functions,in per packet path and called from arch
specific code,are made static inline instead of hal_soc->ops
function calls.This will improve speed by avoiding the function
call overhead.
Change-Id: I1fd4f0a416b71b4ed460852cb6da2f1d7434f2b4
CRs-Fixed: 3130314
