The original BA window size given from CP might > max DP supported,
add sanity check based on HAL target allowed.
Change-Id: Ibadaddeffe65165a89d580d8a5cbf5f7c724c809
CRs-Fixed: 3193852
In beryllium DP, htt_tx_wbm_completion_v3 is used in which
20B are used by host and only 16B is assigned to the htt tx
status.
To fix this, increase the macro HAL_TX_COMP_HTT_STATUS_LEN
to 20 bytes.
Change-Id: I973ba1f8118488089cd6d6baac7fd589886c2164
CRs-Fixed: 3199031
For reo_cmd ring, in current implementation, we call hal_srng_access_end
in case a descriptor is not available before baling out. This may cause
a write to the shadow register for the reo_cmd ring. In case we are in
the middle of WOW, this can be problematic.
Modify existing implementation to use hal_srng_access_end_reap, which
will not schedule a write to the register and simply return.
Change-Id: Ifb83d904e39b3d749522cd246a5ab3fe51a3104e
CRs-Fixed: 3194289
Shadow config v2 can support max of 36 shadow
registers only. For KIWI target, there are 40
shadow registers supported.
Hence add support to send shadow config v3
for KIWI.
Change-Id: If57e6597397da3e239f25a6c0cc24f8fd37dcdf1
CRs-Fixed: 3167758
Add fix for tx monitor double free and other minor fixes like updating
channel frequency and channel number if it wasn't fetched properly,
fetch protection address only if it is valid.
Change-Id: I184e08080a47b903176b9df0a192f0b5eb0b2750
CRs-Fixed: 3184727
In ring WRAP around case invalidate the descriptors which
are being reaped
Also use no_dsb invalidate API for invalidate descriptors
Change-Id: Iafa844c81a8364af31520ce5fa3e030073e7c706
CRs-Fixed: 3198373
For MU_MIMO traffic from AP to STA, RSSI Legacy TLV gives
reception type as QDF_RECEPTION_TYPE_ULOFMDA which is incorrect.
In order to fix this, update reception type from PPDU Start User
Info TLV. Also remove updation of reception type from LSIG TLVs
to avoid override of reception type value.
Change-Id: I9ef4c5bc7a15d4e68404d702bec61eca9c9bad4c
CRs-Fixed: 3178085
Flush and invalidation of descriptor memory at allocation is helping
to avoid NULL descriptors issues in TX and RX path.
Change-Id: Ifcdb65df01365e7ec0b0be59d8b4bf862d90943d
CRs-Fixed: 3180696
Monitor 2.0 uses a msdu_queue (75K memory), which
is currently enabled for monitor_1.0 as well.
Add this memory under Monitor_2.0 feature, so that
there is no memory increase for monitor_1.0.
Change-Id: If0f3701787585ec2b2efde018287101919a77570
CRs-Fixed: 3176254
a. For decapped frames, convert frames from 802.3 t 802.11
b. for non-decapped frames no conversion is needed
c. Apply radiotap header and deliver MPDU to osif layer
CRs-Fixed: 3074441
Change-Id: Ia03b4bad35d69aa292958782cd424f3df56dabbc
To program Vlan-pcp to TID mapping in hw
register, tid no is passed in place of
pcp value to the hal-layer.Fix this by passing
the pcp value correctly to the hal API.
Change-Id: Ib3bdeffc8dbaa7c5f47406316178206b2eec2c18
CRs-Fixed: 3172024
Populate punctured pattern from WIFIPHYRX_COMMON_USER_INFO_E
And get puncture type from puncture pattern.
Change-Id: I3a5ba4c7c478d15cf3c3cfdcfd0573775ae342ca
CRs-Fixed: 3166010
1. Since peer id is reused for reconnection in MLO case,
old entries for queue desc addr is cleared. Clear the reo
internal storage and reset it back on client connection.
2. Send Qref feature WMI cmd to FW to enable the feature.
Change-Id: I6705ce121c8c25d9a2ace039dab21312fa5ea4b1
CRs-Fixed: 3156642
When a packet s destined to ML STA from a legacy peer, use
the ML peer id to identify the primary link and redirect the
packet to primary vdev for Intra-BSS.
Change-Id: Id8e6fcc9e2dd638e6d923eef50f55325fa538c49
CRs-Fixed: 3169484
The maximum WBM2SW rings in whunt for MSL is 5 and
the same could be 4 in wlan code which will result
in wcov failure for MSL. Use a maximum of 5 WBM2SW
rings for HSP based on FW_SIM config flag to address
this failure.
Change-Id: I16770566710efeeea7acbb51f6710e7a996b5cac
CRs-Fixed: 3167050
Add support for tx monitor flush/drop/truncated handling
and few minor fixes from txmon
CRs-Fixed: 3158502
Change-Id: Ic13476984cd591a381941cfa1501307e9cca2b5a
Even if HW cookie conversion is enabled on KIWI, there is some
case HW cookie conversion might not be done by HW, check the cookie
conversion done bit and get Phy Address accordingly.
Change-Id: I4ee7ed9776086812774637f07da1e4504898c3c4
CRs-Fixed: 3153433
Kiwi target does not used TX status ring.
Hence disable the tx status ring for Kiwi.
Change-Id: If3a39a0017a884bee2320188621b1f05e0c6d568
CRs-Fixed: 3150815
Kiwi target does not used TX cmd credit ring.
Hence disable the tx cmd credit ring for Kiwi.
Change-Id: Ibd5fe2905a7362ea2ab89e65d77c7aea6ab259ee
CRs-Fixed: 3150814
Update PPDU specific fields in Rx monitor HAL parsing.
Also correct the offset to be used for user info in EHT_SIG_HDR.
Change-Id: I9dd133d3617754475f097b54b6e1e460f2e67baa
CRs-Fixed: 3153475
Currently in some case we are receiving non error packets on REO2TCL
ring, which is causing issue.
Fix is to set DEST_RING_MAPPING_0 to SW1 for REO dest ctrl
register, So that non error packets with reo_destination_indication
with 0x0 in the reo entrance ring will be routed to SW1 ring.
Change-Id: I67f78f35e7dba899943307902d99d0325a60498f
CRs-Fixed: 3150186
Add a separate APIs to configure RxDMA and RXOLE
configuration to enable the PPE based routing.
Change-Id: I95b8fbb361402bc04fc1f38aa8b0dbc6f99f4f06
CRs-Fixed: 3147720
Make 1:1 dependency on num REOs and rx_thread. Keep num rx_thread
dependent on rx REO rings, 1 rx_thread for each rx REO ring.
Controlled via INI dp_reo_rings_map.
Change-Id: I7c199226cfa3f173ea328d71075816b8eb9ba91f
CRs-Fixed: 3048260
Fetch phy addresses for wbm release ring descs
in the cookie conversion enabled case
Change-Id: I420dc395bfa7b783dfed98b7258e7c0f0728e543
CRs-Fixed: 3146766
Currently the detection logic for non-ofdma packets based
on the ppdu_type_comp_mode and ul_dl is incorrect.
Fix the logic to detect non-ofdma packets from USIG header.
Change-Id: Ic029a2fea948595157146e4105337d02d2e5ed43
CRs-Fixed: 3143088
In case of empty HW descriptor, sw cookie is not valid.
Instead, HW reports ppdu_drop_cnt, mpdu_drop_cnt and
tlv_drop_cnt.
Do not process sw desc, if it's empty HW desc indication.
In case of flush and trucanted PPDU, status buffer need to be discard,
added handling for same.
Change-Id: I1219f71645072bb9e0e80ff271fa354f305c7961
CRs-Fixed: 3144525
Add feature support to tag first packet that wakes up HOST from WoW.
rx_pkt_tlv.rx_msdu_end.reserved_1a field is used by TARGET to meet
such request.
Change-Id: I3d37e13e8cff49bc4f622d3070a19e4c4be56417
CRs-Fixed: 3137621
Use msdu_done_copy bit for Waikiki instead of msdu_done
bit, as access to the latter involves reading of an entire
new word, of which no other parameters are accessed.
Change-Id: I09017e53faff73aef484241f1972fe8c75585eb0
CRs-Fixed: 3132624
Add 64 bit extraction macros for Tx since many monitor
tlvs in QCN9224 use 64 bit offset and shift masks.
Change-Id: Ibf910d876d2305ae8eb16955dab1ed2dd9d66290
