EasyMesh agent fails to update the phymode requested by controller.
EasyMesh controller sends the channel selection request package to notify
EasyMesh agent to change phymode and channel. EasyMesh agent should change
them accordingly.
Update the phymode of the SAP, then restart the SAP.
Change-Id: Iab881b0bfbd1764072b48d426610adc8967111cd
CRs-Fixed: 3181195
If force SCC enabled, user trigger SAP CSA and target channel
doesn't cause MCC with existing STA/CLI. Then overide strict flag to
true, so that driver can skip the overlap interference check and
allow the CSA go through. This is to allow SAP/GO force SCC in
same band.
Change-Id: I7844f7329b922456594cad1402a0d2ac0d0927c5
CRs-Fixed: 3178725
Make puncture work for 11be. Puncture is in EHT operation IE. It should
be supported for 11be mode without MLO IE.
Change-Id: I4406e81895a53d2975aaf5049c8e98a879522888
CRs-Fixed: 3184867
Add a new field max_mcs_index in mlme_legacy_priv to save max mcs
index of current vdev.
Add a new field max_real_mcs_idx in hdd_station_info to save max
mcs index of the connected station.
Change-Id: I28908515cbe5c18c79f14f8645defd5c82e3a6f0
CRs-Fixed: 3065838
Remove the old SAP-CSR flow for start bss, stop bss and
channel change req processing which is disabled currently
under the SAP_CP_CLEANUP macro.
Cleanup the redundant checks in the deauth, disassoc
response processing in CSR.
Change-Id: I5a360fc267688b51ca645551108b65646a3c8c1a
CRs-Fixed: 3164259
Replace blacklist/whitelist with denylist/allowlist in
qcacld3.0. and replace blm with dlm.
Change-Id: I9ba61dde3b3ea008ca3777448d1f8dab83d33ec1
CRs-Fixed: 3091211
Channel width is getting updated in 2 different types, NL type
in some places and rest of the places in internal type.
As the enum types are different between NL type and internal
driver type, SAP channel width changes in the SAP config
during beacon updates. Due to this SAP restarts with
different channel width during SSR.
Hence updated to use only the internal channel width enum type.
Change-Id: Ifd595c079ed7c33692cb96d2514fd1259210e67d
CRs-Fixed: 3124721
If EHT is enabled and channel width is bigger than 80 MHZ, static
puncturing is applicable to this SAP.
Consider punctured channel as valid candidate channel with weight
as max ACS weight for the SAP supporting static puncturing.
Indicate puncture bitmap to hostapd. Hostapd need puncture bitmap
when generating EHT operation IE.
Change-Id: I157878cc405c83114cd82f5fac63375c02e48cab
CRs-Fixed: 3101970
Remove unwanted parameters from start_bss_req and use
the parameters from vdev instead.
Change-Id: Ifea96bf7908b0dae66807b7a346684fe46fdcd4e
CRs-Fixed: 3105488
CAC duration of new channel should be able to get before CSA. During
CSA, CAC duration of new channel is used to populate max channel
switch IE.
Change-Id: I25d430d3eb663c90555ebad7a214b0789ea8c1ce
CRs-Fixed: 3102581
In 3rd party platform, CNSS driver will provide
LTE avoidance channel frequency ranges by API
cnss_utils_get_wlan_unsafe_channel_sap.
Based on requirement, in single SAP case or SAP+SAP
case, ACS channel list should be filtered out based
on vendor unsafe channel frequency ranges.
Change-Id: I583c1bb2583c783858c54e8643fbe1af69d492b1
CRs-Fixed: 3061043
Need save mlo link id and mlo link number information when starting bss.
During reinit, restore mlo link id and mlo link number information.
Change-Id: Ib188cab76d25eae6bb332b3a2ce3deb07825495b
CRs-Fixed: 3039138
If SAE/H2E required by hostapd configure, it must populate in
supported rate or extended support rate set, add host driver support
to check this flag and populate it in extended support rate set.
Change-Id: Id75b5743e93a1a0f1d13150d5436d256e2ca117c
CRs-Fixed: 3016492
ARP response dropped at OSIF due to non-availability
of sta entry with MLD address.
Added sta entry in OSIF/HDD context with MLD address.
Change-Id: Iff70197ca5707b88ea80b42a60a2b1fb383f00a9
CRs-Fixed: 3017249
Remove the usage of csrPersona from csr_roam_profile
and the unused wlan_sap_get_roam_profile function.
Change-Id: Ic7621c5e178a141b7e6e9d820d71fadfbff071ed
CRs-Fixed: 2998988
At present the pre CAC is done based on original SAP's BW,
but usually the original SAP is on 2G and BW <= 40Mhz. The
requirement from user is to have higher BW on 5G. Hence, select
higher BW supported by SAP phymode to do pre CAC and move 2G
SAP to 5G pre CAC channel when pre CAC done successfully.
Also set the default MAX bw pre CAC to 80Mhz based on current user
request.
Change-Id: I3115da8eb649238da50b223c2587db96125ec813
CRs-Fixed: 2984084
Host creates a precac adapter and uses it for all the precac
request instances from userspace. To avoid cac state impact
of previous instance on current precac request, reset the
cac_state before starting a prepcac adapter.
Change-Id: I8bb7a2d10350eeeafaac9bea60947a52a1e8686e
CRs-Fixed: 2970505
As part of regulatory cleanup, remove utils_dfs_mark_leaking_ch()
Use utils_dfs_mark_leaking_chan_for_freq() instead of
utils_dfs_mark_leaking_ch()
Change-Id: I796de0abb50fdbdf9d61768a190553e031a7989e
CRs-Fixed: 2972007
Add support for QCA_NL80211_VENDOR_SUBCMD_GET_RADAR_HISTORY vendor
command. This command will return the current NOL list in driver
and the last Radar detection result in previous SAP active state
(includes CAC state).
Change-Id: I719630c39b89c1813ca05c4356dce627d72d82e2
CRs-Fixed: 2966501
Merge the bandwidth selection of the two API
wlansap_get_csa_chanwidth_from_phymode &
wlan_sap_get_concurrent.
Update 5G Force SCC target Max BW selection for dbs hw:
1. Max BW 80Mhz if sta_sap_scc_on_dfs_chan = 1 and Single SAP
2. Max BW 80Mhz if sta_sap_scc_on_dfs_chan = 0 and STA+SAP SCC
3. other case use User configured BW
The above Max BW value will be limited by SAP user configured
BW at the end.
Change-Id: I1b165d1411288ca6845f90103adbf8bbfc34f67d
CRs-Fixed: 2925750
Use wlan_reg_chan_has_dfs_attribute_for_freq API to check DFS
attribute flag instead of unused wlan_reg_chan_has_dfs_attribute
API as part of regulatory clean-up effort.
Change-Id: I7ff75f56ebd641d500c365f756526b787986dcbe
CRs-Fixed: 2908159
Remove all of the conditional compilation for pmf since this
feature is mandatory for future scope from protocol point
of view.
Change-Id: Id3a2127e9ecb343ad2a0354dcbc331c22167d7fb
CRs-Fixed: 2852630
Extend type of the variables for the number of MAC addresses
in ACL, from 255(uint8_t) to 65535(uint16_t).
With this change, it can support up to 65535 MAC addresses in
theory, after modifying the MACRO 'MAX_ACL_MAC_ADDRESS'.
Change-Id: I32288e46ea4590ebaaa143b2cdca7cefd14997c4
CRs-Fixed: 2856707
There are CSA IE/beacon template cmd with duplicate IE COUNT: 10.
And interval of 2nd IE COUNT: 10 and IE COUNT: 9 is much less than
100 ms.
Radar is triggered, tried to switch to channel 11, but set
target chan id 11 as frequency 11 wrongly, frequency 11 is illegal
and disabled, then switch to new freq: 2412 again.
Change-Id: Id2e5823795ae2f61e6d7cbbbc91c4f485ddeceb3
CRs-Fixed: 2838113
While pre cac is in progress and if the SAP is stopped from UI, It may
lead to dead-lock due to rtnl lock. This is because, stopping SAP will
trigger the stop_ap first and then hostapd_stop. Stop_ap will schedule
a work to handle pre_cac failure (Thread1). hostapd_stop will be
triggered in parallel (Thread2). This will result in a below dead-lock
scenario.
Thread1: Waiting to acquire rtnl_lock to unregister pre_cac adapter.
Thread2: Acquired the rtnl_lock and waiting for Thread1 to complete
To resolve this dead-lock, unregister pre_cac_adapter during
hostapd_stop without requesting for rtnl_lock.
Change-Id: I222df9ee0d75b16f79c28b7cdd86369c340a15c2
CRs-Fixed: 2832256
Add a check for passive channels when checking the restricted
bands on SAP. This change blocks SAP from restarting on a passive
channel.
Implement the function to filter out passive channels from the PCL.
Change-Id: I80a4b78c1af77f5bfa68be3163f9e9a78cc6425a
CRs-fixed: 2817589
Previously, if STA is connected to DFS channel and SAP starts on
Non-DBS HW, then it is forced to start on DFS channel with BW 160 Mhz
irrespective of BW on which STA is connected without CAC.
Even after STA disconnects, SAP remains on DFS channel with BW 160Mhz.
So, scan will be disabled and STA cannot be connected on any channel
other than DFS channel.
If STA is connected on non-DFS channel on 5 GHz and SAP starts, it
will start on non-DFS channel as primary channel with BW 160 Mhz
without CAC. Also, scanning was also allowed when SAP is started with
BW 160 Mhz. This might violate regulatory in case radar comes up while
scanning.
Standalone SAP on DFS channel was not allowed.
To fix this, Force set SCC for non-dbs HW, this way standalone SAP
can come on DFS channel but scan will be disabled in such case and
STA cannot be connected other than DFS channel.
In case STA gets connected to dfs channel in non-dbs HW, then sap
starts only on STA channel with force SCC with BW
MIN(sta_chan_width, CH_WIDTH_80MHZ).
Afterwards, if STA disconnects, restart the AP with BW CH_WIDTH_80MHZ
on safe channel. Scan will be allowed as the DFS master capability is
offloaded to AP with which STA is connected on DFS channel.
Also, if standalone sap starts, then STA connects to DFS channel then
SAP will restart with STA channel frequency and Channel width
MIN(sta_chan_width, 80MHZ).
If standalone SAP starts and then STA connects to non-dfs AP or SAP
starts when STA is already connected to non-DFS AP, then ch_width is
MAX(sta_chan_width, 80MHZ) (5 Ghz) or 20 Mhz (2.4 Ghz).
If STA disconnects during SAP+STA on non-DFS, SAP won't restart unless
the STA was connected on BW 160 Mhz.
Change-Id: I1cebfc79f170c1e4e2710ed747ec804df3d8b441
CRs-Fixed: 2809255
When sta_sap_scc_on_dfs_chan = 0, SAP is not allowed to SCC
with STA on DFS channel. Check the SAP target channel DFS flag
considering the target channel bandwidth.
Change-Id: I321c1055574477fe39ca8569f24a4040c8dc1904
CRs-Fixed: 2756518
Currently, when the country code changes, there is no logic
to restart the SAP on a new channel. Add a case to check if
the channel is not allowed, then calculate a new safe channel
and update the SAP restart reason.
Change-Id: I679ce6f72228b431530953a631c8c8afa4597187
CRs-fixed: 2718324
Check phymode to verify it is allowed for the current country
before starting SAP or connecting STA.
Change-Id: Ica5e70bbd421c4dc18a34545f63e436bc482fc46
CRs-fixed: 2658294
Currently, Rx retry count statistic is not supported by firmware.
So host driver also not updating the corresponding statistic in
peer stats. Datapth is updating this counter using retry bit in the
rx MPDU. Update peer Rx retry count value from data path.
Change-Id: I4fd422faa7a766090991c461cd6fd2cc70d2fcc3
CRs-Fixed: 2691704
Remove instances of CFG_COUNTRY_CODE and country_code from
wlan_mlme_reg struct.
Remove redundant country code APIs.
This change is needed because the country code is no longer
stored in CFG file, and subsequently, there is no need for
CFG_COUNTRY_CODE.
Change-Id: Ia4b3b40d0dccfde696352967f2902dfba344a445
CRs-Fixed: 2634079
Regarding to the go+sap scc on dfs channel, sap can follow with go
to the same dfs channel, but sap tx is hung.
Since the host set the dfs_cac_block_tx by mistake when ap started,
though the ap skip the cac because the scc go finished the cac
procedure, then dfs_cac_block_tx has no chance to be reset.
The fix is to take account of dfs cac state to determine the proper
dfs_cac_block_tx.
Change-Id: I7a35225711f587b83d2fc381108d7d3f15893867
CRs-Fixed: 2631457
Currently QDF_MAX_NUM_CHAN/POLICY_MGR_MAX_CHANNEL_LIST aren't aligned with
NUM_CHANNELS, these unalignment may cause some potential OOB access.
So replace QDF_MAX_NUM_CHAN/POLICY_MGR_MAX_CHANNEL_LIST with NUM_CHANNELS
to keep unified.
Change-Id: Ib6c81a3979f2fd29ba1ec678f018a6704b599385
CRs-Fixed: 2644066
When dynamic channel switch is enabled, trigger acs and switch to best
channel if wlan interference is found in 5g mac.
Change-Id: I56661f5c42a233a0dc0a6400d75cb8f5c0019706
CRs-Fixed: 2599176
Combine and print channel for ACS and roam channels, instead
of printing one channel at a time.
Change-Id: I398678e1843849bdf4f4c72f0315c626c97438a6
CRs-Fixed: 2623805
CRYPTO_SET_KEY_CONVERGED is a temporary flag which is used for
converged crypto component transition. The transition has already
been done, so cleanup legacy code related to the flag in HDD layer
and SAP module.
Change-Id: Ic92e44e53c63ba2752907ace3ffc0f55d18470e2
CRs-fixed: 2593520
When SAP is on 5G and STA connects to 6Ghz AP, the "force
SCC" logic will move SAP to STA home channel if SAP is 6Ghz capable.
If SAP is not 6Ghz capable, SAP will be moved to 2G (DBS) to
avoid MCC(5G+6G) for DBS HW and SAP will stay on 5G for non-DBS HW.
SAP is 6Ghz capable only when all of below statements are true:
a. SAP config includes WPA3 security - SAE,OWE,SuiteB.
b. SAP is configured by ACS range which includes any 6G channel or
configured by 6G Fixed channel.
c. SAP has no legacy clients (client doesn't support 6G band).
legacy client (non 6ghz capable): association request frame has no
6G band global operating Class.
Change-Id: I7e9723fd1b679326a3df61932850589e6e503f3d
CRs-Fixed: 2593569
Presently, during Subsystem Restart(SSR) the object references
are not released cleanly, invoke stop adapter during the SSR
to have common functionality between the netdevice going down
and SSR.
Change-Id: I2980379022f62ef27dea92868c8033c087544d50
CRs-Fixed: 2587443
Use frequency as parameter for channel overlap handling
APIs - csr_check_concurrent_channel_overlap,
csr_calc_chb_for_sap_phymode, csr_get_ch_from_ht_profile,
csr_handle_conc_chnl_overlap_for_sap_go.
Change-Id: Ie3c9d466f21d7313998328432c063b1f6c7e5d0f
CRs-Fixed: 2577706
When 5G band is disabled by set band, need SAP switch channel
to 2G. When 5G band is enabled again, need SAP switch back to
original 5G channel. When sta connecting, SAP can't switch
channel.
Merge logic of SAP channel switch for band change and for force
scc with sta, both are implemented in:
policy_mgr_check_concurrent_intf_and_restart_sap now.
After sta associate succeed or fail,
policy_mgr_check_concurrent_intf_and_restart_sap is called again
to check and try SAP CSA for band capability change.
Change-Id: I8574209aac3cabb748a8ec05050244f480e1a0e9
CRs-Fixed: 2589021
For SAP/P2P GO on 5G, when receive cmd to disable 5G band when
modem n79 band used, will move to 2G band via CSA.
1. If no active connection on 2G, select ch by safe list, or
channel 6.
2. If there is STA on 2G, force scc with it.
3. If there is SAP/GO on 2G, force scc with it.
4. Handle one race condition that if candidate is already
selected & FW has gone ahead with roaming or about to go ahead
when set_band comes, it will be complicated for FW to stop the
current roaming. Instead, host will check roam sync to make sure
the new AP is on 2G, or disconnect the AP.
5. If 2 SAP on 5G, move both to 2G and keep scc.
When Set band to enable 5G band again, restored all 5G SAP/Go..
Change-Id: I9b2b1ead3b4502022aeefc08359037457bb051f9
CRs-Fixed: 2580204
