There are compilation issues if feature FEATURE_SAR_LIMITS
is disabled.
Fix compilation issues relaterd to feature FEATURE_SAR_LIMITS.
Change-Id: Ifdb7c14ea3e973bc63560eb78edd084a53e28974
CRs-Fixed: 2619492
Currently, There is no check to validate vdev in function
wma_form_unit_test_cmd_and_send before sending command to
fw which may lead to fw crash due to invalid vdev id.
Fix is to add validation check for vdev before invoking
wmi_unified_unit_test_cmd and sme_send_unit_test_cmd.
Change-Id: I61db37417f05968365f210515c28eb6184279c77
CRs-Fixed: 2618295
Currently, eHDD_DOT11_MODE_AUTO has not been checked, so if gDot11Mode
ini is set to 0, this would fail to update umac with the correct HE
capability. Add an if check for eHDD_DOT11_MODE_AUTO to check if it
has been enabled.
Change-Id: I5d26314f4bcfedcf1e913625ac946118ddb9a983
CRs-Fixed: 2619091
AP has less keep alive timer than STA, so AP is kicking out the STA and
sending the deauth.
To resolve this change CFG_INFRA_STA_KEEP_ALIVE_PERIOD_DEFAULT value from
60 to 30.
Change-Id: I0522071bc634b029178de6e09c11d237351a334d
CRs-Fixed: 2616279
Removed ol_tx_hl_vdev_bundle_timer definition for
kernel v4.15 as __os_timer_shim will wrap the kernel
timer handler API prototype as per new definition for
kernel v4.15 and above.
Change-Id: I873ba706050ea8020e4af7133c86ef8aabb93d53
CRs-Fixed: 2602835
When application issues NDP end to terminate an NDP connection,
host driver sends a request to the firmware and firmware
terminates the NDP by sending NDP end frame to the peer.
Currently, driver returns immediately after posting request to
the firmware. Application might issue NDI delete immediately
after returning from NDP_END request.
But firmware might take some time to complete the NDP termination
and send NDP_END indication to driver.
When driver tries to delete the NDI before receiving NDP_END
indication from firmware, it causes inconsistency in firmware as
the NDI on which the NDP is parked is freed.
So, wait till the NDP_END indication comes from
firmware(or timeout happens) before returning from ndp_end request
context.
Change-Id: Ied7ed36451ef007e38f67d48c54290b9dd674f54
CRs-Fixed: 2616018
Add feature flag DROP_RXDMA_DECRYPT_ERR to not process or drop
frames coming with error code as rxdma decrypt error.
Change-Id: I9ca8905c6487051f57a5203e5fe1a530a74a951a
CRs-Fixed: 2617442
Currently there is no inis for NAN component:
1. To configure the keep alive period for the
NDI interface.
2. To enable/disable discovery of NAN cluster with
Master Preference (MP) as 0 when a new device is
enabling NAN.
Add ini support to configure above mentioned values.
Change-Id: I47b67eb89fb8849960a9f492d2909e45b96308f3
CRs-Fixed: 2617839
For ADDROAMSCANCHANNELS command, always append user given channels
into the existing preferred channels list in driver. If the preferred
channel list exceeds SIR_ROAM_MAX_CHANNELS i.e. 80 then overwrite
oldest entries with new channels.
Change-Id: Ifa12b1e4d75dd927bdbceea9a076ed1bcbd91f4f
CRs-Fixed: 2618318
In hdd configure sar index api if the FW supported version is not
SAR_VERSION_2, in that case there is a mem leak issue as the
memory is allocated for sar_command is before the fw sar version
check and in case of fw sar version check failed, memory allocated
for sar command is not freed.
To resolve above issue, move the version check before the memory
allocation for sar command.
Change-Id: I1d5e6bad63134c89ac456c3247eebad79e8f8c79
CRs-Fixed: 2618648
Currently there are unnecessary/duplicate logging. Identify and
reduce those logs that are not necessary.
Change-Id: I648b84786f9009d45e54fa67c21c834a1eae1608
CRs-Fixed: 2617648
This patchset adds the FTM TIME SYNC component in
target_if to register the ftm time sync wmi events/cmds.
Change-Id: I4ea14266a912c9d261a67809556774860b5ddab1
CRs-Fixed: 2617055
Add pld API to get audio timestamp needed in FTM wlan
timesync feature to synchronise the audio clocks of
master and slave devices
Change-Id: I6f08e33904e26728492286f516ce5a8074afd1ea
CRs-Fixed: 2616917
Presently, there is a very narrow race condition that causes
scheduler_thread to remain in a suspended state for undefined period of
time. The race condition occuers between idle_psoc_timeout and
wlan_hdd_cfg80211_resume_wlan.
As a part of idle_psoc_timeout, the driver calls hdd_wlan_stop_modules
that sets the flag "stop_module_in_progress" and checks if driver is in
suspended state. If yes, it resets the flag and returns. But in the case
of a race condition, before this reset and return is carried out,
wlan_hdd_cfg80211_resume_wlan is invoked. The validate_context inside
the resume function fails due to the above mentioned flag being set. As
a result, resume fails and the driver stays in suspended state. This
causes the driver to enter a infinite loop of stop_modules not being
successful.
To close this small window of contention, remove the validate_context
check. hdd_ctx is always guranteed to be valid and also DSC takes
care of synchronizing the operation, thus the check is redundant.
Change-Id: I723f78e4c33bdc531776c46eff2428dbd869493f
CRs-Fixed: 2616177
Currently there are unnecessary/duplicate logging. Identify and
reduce those logs that are not necessary.
Change-Id: I5473db8cf2406aa6aa2f8531cf5a0cc8b7bd2188
CRs-Fixed: 2614121
Currently, wma->peer_macaddr is passed as peer mac address for
NDP peer removal. This gets filled only when PEER_STATS_INFO is
queried from firmware. This is not the right mac address to be
sent for peer removal. Driver might attempt to remove an invalid
peer(or NULL) which leads to assertion in wma_remove_peer.
Get the peer mac address from tpDeleteStaParams which is
sent from lim and pass it to wma_remove_peer.
Change-Id: I90beb7edc1d6ad5790ed972dcb9d3ac42bc04ea7
CRs-Fixed: 2617918
Currently there is no SAR index is configured to the FW
before device goes into suspend mode.
with the new requirement, configure the sleep mode index
as sar power limit to the FW before device goes into
suspend mode and configure safety mode index to the FW
on wakeup.
Change-Id: Icedbab047ec3bb252f0ed9c1b2baf04d2726a60e
CRs-Fixed: 2617102
Currently there are lot of duplicate logging. Identify and
reduce those logs that are not absolutely necessary.
Change-Id: I649ce3bec8c3c8542fe9edd08907da9ab01fa948
CRs-Fixed: 2617504
lim_sta_send_add_bss_pre_assoc, sta_send_add_bss and
wma_send_peer_assoc have duplicate logs.
Also send_peer_assoc_cmd_tlv print all the required info with
flags and other params.
So remove the duplicate logs and keep only missing info in
sta_send_add_bss and wma_send_peer_assoc, which is not printed
anywhere.
Change-Id: Ic5aa63f1a4296553b584bcc768d8c5cb04ddddf3
CRs-Fixed: 2616910
Add support SAR request-response event. When
sar_unsolicited_timer expires driver sends
QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS_EVENT event to
user space and expects user space to set sar power limits
with the vendor command
QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS.
Add a request-response event to wait for
QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS vendor command from
user space. If driver does not get
QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS command from user space
for a specified number times, driver configures the sar safety
index to the FW.
Change-Id: Ic2b9e0b7fe06093ce849fb46df7bfce5da409ef6
CRs-Fixed: 2615519
Add SAR unsolicited timer to the driver. This timer starts
on every data tx (if not already running) and stops on
command QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS.
If this timer expires, a vendor event
QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS_EVENT is sent to the
user space to issue the QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS
command.
Change-Id: Ic30e5ac606d2b6b0cbc9209174adcd5213eac08e
CRs-Fixed: 2615510
