update the codec digital RX clk rate to 9P6MHZ or
11P2896MHz depends on usecase.
Change-Id: I1c7167c10ef8bcdba876be265ef90d980f822d03
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Defer the probe when the msm cdc pinctrl driver is not
proded.
Change-Id: Ia6aaaca7c55b60b53008ffda0fc40e5db407cd2a
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Handle PDM watchdog interrupt. Enable watchdog
before analog PA is enabled and disable it
after analog PA is disabled so as to prevent false alarms.
Change-Id: Ife131d5d64d2ad2b8f7aad50af3aa07238bbbda9
Signed-off-by: Faiz Nabi Kuchay <quic_fkuchay@quicinc.com>
Updated the wsa dailink to support 384Khz HS playback.
Picked latest codec fixes to kernel6.0.
Change-Id: Ia570dc3f3ed55415ac374e1ba3bb6f2277dade96
Signed-off-by: Sairam Peri<quic_peri@quicinc.com>
Updated WCD937x, WSA881x-analog and bolero drivers for successful
compilation on kernel6.0 for holi.
Change-Id: Ia91a999f825570b3d7123842f0aad3740c4d25ed
Clear the wcd937x interrupt ack registers in post_irq_handler.
This is needed for wcd937x, as regmap_irq is not clearing
the ack registers after the ack bits are set.
Change-Id: I105a4b423a0d01ff1bd3239e0f2d42294557ff10
Signed-off-by: Vangala, Amarnath <quic_avangala@quicinc.com>
When interrupts are triggered on the second or third interrupt
status register, current logic cannot clear that interrupt status
after handling it. Enable use_single_read for wsa and wcd regmap
to resolve the issue.
Change-Id: Ieac57e169505d4455dde1dcd0e80e222e3e8eb1e
Signed-off-by: Meng Wang <quic_mengw@quicinc.com>
Add range check for ucontrol value to avoid array
overflow.
Change-Id: I7b699519bec6f605e5ca5ece8f67badbefc7a094
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Update swr_tx slave port config to use slave provided port params
and remove slave port static tables.
Change-Id: Icfedf1229a88432e80c2294e13f2ccc3949417c5
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add Makefile in each sub-folder
Add Android.mk file on top level folder of audio-kernel
Change-Id: I024aa5080ae52b55700f0a65ab05034be8c9cdad
Signed-off-by: Jyotirmoi Sarma <jyosarma@codeaurora.org>
Add enum names defined for callback between wcd and bolero in
separate file and include that file in order to have same enum
across wcd and bolero.
Change-Id: I808c2ad3de37655c1ba2b8e096def60703ced7f2
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
As ADC and MIXER dapm widgets powerup sequence in soc-dapm
got re-ordered, need update same in codec driver to handle
calls to soundwire.
Change-Id: Ibc99d21e29f9e9d7195b4ba8d4c995c46d6aef6f
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
WCD937x codec requires clear registers to be written '1' and
'0' for clearing interrupts. Enable clear_ack flag in regmap
irq chip structure for wcd937x.
Change-Id: I0a2e4fc85fe6dca75885b5300840669afeabc80c
Signed-off-by: Vangala, Amarnath <avangala@codeaurora.org>
With multicodec approach, codec widgets are added much earlier during sound
card registration than aux codec approach. The connections between bolero and wcd938x
are done via device tree at a later point. DAPM does power checkup for codec widgets
before the codec-codec path is connected. This results in wcd937x dapm inputs/output
to be considered as endpoints, which results in playback/record failure once after
bootup. Hence, add dummy output/input widgets to wcd937x dapm inputs/output which are not
codec endpoints.
Change-Id: I8589f9a33261531eaad74e8f12ef1825fa90a014
Signed-off-by: Vangala, Amarnath <avangala@codeaurora.org>
add machine driver for holi.
compile wsa881x analog driver for holi.
compile wcd937x and wcd938x drivers for holi.
Change-Id: Icba23cc4b1dd40f7dec6f16bb67a6fae26317f80
Signed-off-by: Vangala, Amarnath <avangala@codeaurora.org>
Add default case for switch to avoid the
Null pointer dereference for the map and num_ports
variable in for loop.
Change-Id: I59c9dc6e5396bcb409876378c811143da1c81551
Signed-off-by: Prasad Kumpatla <nkumpat@codeaurora.org>
Add delay in post ssr to eliminate playback pause on euro headset.On
post ssr hs detected as hp due to where pa become on before the completion
of wcd_correct_swch_plug workqueue which lead to detect plug_type
as hp.
Change-Id: Ie114fcd0458d9f5edebeee087c90600c3b0c3da2
Signed-off-by: Prasad Kumpatla <nkumpat@codeaurora.org>
Mute is observed in amic record sometimes in concurrency with
sva. This is because if record is over tx0 then digital clk
is not enabled. Enable clk after enabling micbias to resolve mute.
Change-Id: Iba3aa4fade0ac5889218eaee2c5d2c4bd4431d50
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Enable compander based on mixer ctl set for ear path.
Change-Id: Ie6287469f1baa9dba239d369bd5a29ed8e44522f
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Pop is heard with special headset with silence record
during SSR. Resolve pop by allowing sufficient time for
wcd937x_reset post SSR and again initialize registers
post SSR.
Change-Id: I80e70a98a72b247dca878673a30651647b676659
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Add rouleur codec support in bengal machine driver
to create codec entry and invoke mbhc hs detect
functions for respective codecs. Correct the logic
for headset detection pull up current and
volatile registers for digital part of rouleur codec.
Change-Id: I22545dc796c215c1501e883796546c97d8ca8698
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Headset is corrected as lineout during SSR/PDR. This is
because adc voltage is not measured correctly due to SSR state.
Enable flag deinit_in_progress during SSR down to check if
device is not reported and disable it after device up.
Change-Id: I6fc4fff4149c36ba16aa668a960505504a5d811f
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Update function return value to avoid compile error
Change-Id: Ia463ea8bb3c87ac6fb9f5959be0f5a6fa461667d
Signed-off-by: Kunlei Zhang <kunleiz@codeaurora.org>
Add dynamic port enablement for wcd938x and
wcd937x targets to support unified swr tx port
mapping added as part of SWR 1.6 updates.
Change-Id: If0cf823dc51028fd5bd95f5a49ffe05998526be6
Signed-off-by: Ramlal Karra <rkarra@codeaurora.org>
Update kernel version references from 4.19 to 5.4.
Update symbolic links to new kernel version files.
Change-Id: I38baa52218b16e0b0c86ad898912d29ec4d3d516
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Clock disable at aux dac event is not needed
as rx3 widget already disables it.
Change-Id: I67feec194cdae5c6d84efcde0a2931ba8f8440dd
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
