Add WMI changes to send TID-to-link mapping to FW as part of peer assoc
command and as part of WMI_PEER_TID_TO_LINK_MAP_CMDID.
Change-Id: Ia3a8fb10d49e1d54d6f4f418be3f684bc0147c5c
CRs-Fixed: 3183734
cal version is included in EXT2 svc ready message to indicate the bdf
and ftm version to host. Add API to extract this from ext2 message.
Change-Id: I83f4d6e83a3f78f993b40527aed7291c6496777c
CRs-Fixed: 3182634
If the multi-client Low latency feature enabled in driver,
FW sends WMI_VDEV_LATENCY_LEVEL_EVENTID to report latency
level honored by FW as a response to a request
command WMI_WLM_CONFIG_CMDID.
Change-Id: I06f7bbc2365e8b71e0ae6386ef42ef4238dafd35
CRs-Fixed: 3180940
Add change to fetch and save the WMI service capability
bit of FW to support multi-client low latency feature
using service bit.
Change-Id: Ifce82c06fc913668949ed06634da1eebcea80397
CRs-Fixed: 3180932
Firmware advertises per candidate roam frame capability to
indicate:
1. Firmware sends auth/assoc frames for each candidate to
which roaming was attempted.
2. Fill the frame info TLV with authentication algo = 3
for authentication frames.
Add support for the roam per candidate frame info capability
Change-Id: I95c23031ab0fbc21fb9d8db3bd54004e4d1ac234
CRs-Fixed: 3172311
Change puncture_pattern to puncture_bitmap in peer_assoc_params.
As FW required, do the bit inversion for puncture bitmap in peer assoc,
then pass it to FW.
Change-Id: If96358aa9cc639555835ca1a1412d7893b16dbd7
CRs-Fixed: 3124854
Replace slave for target, and replace
master for initiator which pair of slave.
Change-Id: I51ee0ce1ce0d0dc30281388a270bda1edfac2903
CRs-Fixed: 3169180
1. Since peer id is reused for reconnection in MLO case,
old entries for queue desc addr is cleared. Clear the reo
internal storage and reset it back on client connection.
2. Send Qref feature WMI cmd to FW to enable the feature.
Change-Id: I6705ce121c8c25d9a2ace039dab21312fa5ea4b1
CRs-Fixed: 3156642
WMI op extract_roam_event is also needed to extract roam event
of LFR2, so let it enabled for LFR2/3 both.
Due to struct roam_offload_roam_event is only defined for MCC,
add MCC specific macro CONN_MGR_ADV_FEATURE to protect it.
Change-Id: Ie9724ee578feb60ada30fe75ed3f155a2bbe77a9
CRs-Fixed: 3167557
Copy software image version, chip information,
pktlog json version and pdev id from the event received
from firmware.
Change-Id: I53c2fceee129fa69126ae8214fb652a744bfcbfa
CRs-Fixed: 3165004
TLV wmi_bcn_tmpl_ml_params was used to send the CSA/Quiet related
information to FW for the partner links. This TLV is deprecated now as FW
internally derives this information for the partner vdevs. Hence, set the
size of this TLV as 0.
Change-Id: Ibd783f5eed93872a6953dc2231b019f27a41109d
CRs-Fixed: 3157298
Add support to set 11az ext feature flags
Read the firmware capability for 11az features and
advertise the corresponding wiphy flags.
Change-Id: I85f6cc2f65a5d9892830f66a726cffc823093bca
CRs-Fixed: 3150584
Add WMI support to set PN Rx Filter which is used to forward
frames to host upon PN failure.
Change-Id: Ib32abc681e17e1a6189a295314a497fc0c21b15a
CRs-Fixed: 3150832
Add WMI service-id for radar found center freq
and populate_tlv_service for WMI_IS_RADAR_FOUND_CHAN_FREQ_IS_CENTER_FREQ
CRs-Fixed: 3135120
Change-Id: I2f25bc0c9629a0bddf79b7f52eb5fcb82206cdc8
Rename files with blacklist/whitelist to denylist/
whitelist. Rename files with blm to dlm.
Change-Id: I6f533c30c664aaaf713cdd2e2e34f9528df139b5
CRs-Fixed: 3099867
Add support to handle the FFT recapture config and
pass this to FW. The recapture feature must be
enabled only for spectral scan period > 52 us and
Normal Spectral scan.
Change-Id: I6b92fcd674ae95bcd0a23892ef9ccc6ba487d6ad
CRs-Fixed: 3140890
Extract all the parameter provided as a response from the firmware
for the TSF action command.
This could be used to calculate the difference between the TSF
and TQM clocks
CRs-Fixed: 3136492
Change-Id: I8377bd177f5ea246c9b7939315509ab0b6f2051c
Add WMI ops for SAWF WMI commands
1. Config service class
2. Disable service class
CRs-Fixed: 3118070
Change-Id: Ie21fcfb1f25d2195eee679307e8970ccdda9992f
Add support for EHT PPE threshold's. Store 2G and 5G thresholds received
in service ready. Fill peer PPE thresholds for EHT peer.
Change-Id: Id5c8310cbf34c59a3d88072b37ce3f871354ed17
CRs-Fixed: 3128586
Add change to fetch and save the WMI service capability of FW to
support multi AST delete using service bit.
Change-Id: I038073085dca1370bafe691b6b0ba8c4476be7a2
CRs-Fixed: 3118892
Extract information from wmi event wmi_vdev_quiet_offload_eventid and
send it to mlme
Change-Id: I49ef7f2811c5975a95e8e33050977c49e2b104e4
CRs-Fixed: 3101974
Currently, WMI APIs do not support new TWT public structures.
If the TWT componentization feature is enabled, then extend the WMI APIs
with TWT componentization structs.
Change-Id: Ic987960e880376066b81881dc32ec96faf609cc6
CRs-Fixed: 3085377
Rename wmi EHT MU/BE config defines in generic way instead of
having BF in all defines.
Change-Id: I3da2587582556ccda5f1d957faf04aa1a104acc4
CRs-Fixed: 3097171
- Add wmi pdev param ids.
- Add wmi ops to send set retry thresold, mcs drop value
and probe intervals.
Change-Id: Ic316337244e8fab07e7ed214c5fe62bf43a827d4
CRS-Fixed: 3126266
Add SAWf to init resource config to communicate
to the FW to either enable or disable Service Aware Wifi
Change-Id: I8285e383cb464c506e98e3a88dd267dae4b96558
CRs-Fixed: 3101373
When validating MMIE, if PN error is found, track it using relevant
statistics. Defined WMI_HOST_RXERR_PN to flag such PN errors.
Change-Id: Icb1fe9a653f67611539b5cb463adfceadedae38e
Initialize the below wmi service id to enable undecoded frame
capture filter support. This is added to support monitor status
ring configurations for filtering in PHY error packets.
WMI_SERVICE_FP_PHY_ERR_FILTER_SUPPORT
Change-Id: I2e35609e89ac1ba000118bc2699a8ce61612a267
Introduce a new flag "BE_PKTLOG_SUPPORT" for beryllium specific
pktlog support.
Change-Id: If91156541b322905ad5d97cf2d9d7ae687290ecb
CRs-Fixed: 3115832
Firmware advertises the service capability bit
WMI_SERVICE_PNO_SCAN_CONFIG_PER_CHANNEL when it supports per
channel scan config flags. Get this and cache in psoc.
If firmware supports WMI_SERVICE_PNO_SCAN_CONFIG_PER_CHANNEL,
it uses the upper-12 bits(bit-20 to bit 32) of channel_list
for flags and lower 20-bits(bit-0 to bit-19) for frequency.
If firmware doesn't support it, then channel_list holds the
frequency value only. Fill the flags and frequency accordingly.
Change-Id: I30d36a3c164e23cf0395129e5b93d186b81aa8a6
Crs-Fixed: 3103921
Add Host enums for the following WMI pdev parameters related to
Beryllium Spatial Reuse.
- WMI_PDEV_PARAM_OBSS_MIN_DURATION_CHECK_FOR_SR
- WMI_PDEV_PARAM_TRUNCATE_SR
- WMI_PDEV_PARAM_CTRL_FRAME_OBSS_PD_THRESHOLD
CRs-Fixed: 3112080
Change-Id: I19accc6dc2a744599ccce6ebf683499d92881993
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the FW to
indicate different capabilities of the Spectral HW.
Add support to extract the FFT size capabilities from this event.
Change-Id: I9640fa51e4249b9d1c2d9d3ac5da7f1d56c9d006
CRs-Fixed: 3098880
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the FW to
indicate different capabilities of the Spectral HW.
Add support to extract the sscan bandwidth capabilities from this event.
Change-Id: I6ff6e5a8d80271fa62a430c986f53a321d46c66b
CRs-Fixed: 3098832
