Add WMI changes to send TID-to-link mapping to FW as part of peer assoc
command and as part of WMI_PEER_TID_TO_LINK_MAP_CMDID.
Change-Id: Ia3a8fb10d49e1d54d6f4f418be3f684bc0147c5c
CRs-Fixed: 3183734
Due to moving to 11be D1.3 old eht ops is seen as invalid and
unnecessarily flooding console. Moding these prints to debug level.
Change-Id: Ibb21ffe9ed670c9ef9bc1e6d91f90ea5118a78f3
CRs-Fixed: 3185395
Frames which are received in parallel across links should not be
discarded as stale frames. Exclude frames received in parallel from
stale frames.
CRs-Fixed: 3183145
Change-Id: I218f24658307244b3d5fbad09c6ccf2e42221138
T2LM negotiation happens per MLD level. Hence, define the T2LM related
structure in wlan_mlo_peer_context.
Add API to get the protected EHT action frame subtype.
Change-Id: Ia3870fbb38b8d673f96954af18078c96d20365f3
CRs-Fixed: 3167178
RX_PPDU_END_STATUS_DONE TLV is not being processed, since Host
is not copying the last byte from the payload.
Add code to copy the full payload from status frag and process
it to the upper layer.
Change-Id: I51d03f5664b2944008936e3711f2ba74bcfde89c
CRs-Fixed: 3179137
Add rssi dbm support bit for rssi_comb calculation
using parameters received from the fw.
Change-Id: Ice57ed69db74852a8b03752632bae747c043e93d
CRs-Fixed: 3183406
Use the PPDU duration given by FW to find the end time
stamp of management frames.
CRs-Fixed: 3181500
Change-Id: Ibabe82c8e2d3cd7e494e764a9a2baeded89a7300
Read the management Rx reorder snapshots back to back to get a
consistent value.
CRs-Fixed: 3181479
Change-Id: I5ff73db5d4be362d7449494f3630a11da0456f0e
Copy Engine(CE14) is used for diag events on qcn9224. Add changes to
configure this CE as dest ring and fix diag event handler to use
wmi_handle from first pdev similar to other WMI events.
Change-Id: I314939169f9be32cd277af68dcd3ef7a0eb06187
CRs-Fixed: 3177987
Currently host driver defines 11d offload APIs under
HOST_11D_SCAN feature flag which is not correct.
Add 11d offload APIs under TARGET_11D_SCAN feature flag.
Change-Id: I0d3205b215c9fc363a71c4e7a6b54e40fb10a964
CRs-Fixed: 3183200
Flush and invalidation of descriptor memory at allocation is helping
to avoid NULL descriptors issues in TX and RX path.
Change-Id: Ifcdb65df01365e7ec0b0be59d8b4bf862d90943d
CRs-Fixed: 3180696
Add an API wlan_reg_get_best_pwr_mode, to get the best_power_mode
based on AP's primary channel center frequency and AP's operating
bandwidth. The best power mode that has the maximum EIRP power
allowed for operation among the 3 AP types, i.e, LPI, SP and VLP is
chosen as the best power mode.
For example:
If primary channel center frequency = 6115 MHz and AP's operating bandwidth
is 80 dbm. If,
LPI EIRP = 30 dbm
SP EIRP = 33 dbm,
VLP EIRP = 27 dbm,
then the best power mode returned is SP.
Also, remove the static declaration of reg_get_subchannels_for_opclass
so that it can be called by wlan_reg_get_best_pwr_mode.
Change-Id: I89b6bc35b5c15a49e2d49265c8685f9d291fb48e
CRs-Fixed: 3163714
In receive path for IGMP packets modify the source mac to
unique and random address per MLD.
Change-Id: Ifcbf414017b2596656d53d6c921cf7fd63bf0cac
CRs-Fixed: 3176816
Add API to get the MLD capabilities from a given Basic variant Multi-Link
element or element fragment sequence.
Change-Id: I9f0d8069a970523948fd604b4977efd3d41a4d2d
CRs-Fixed: 3177254
Per peer extended stats are maintained as a histogram having 10
delay buckets. Each packet will fall into one of these buckets as per the
delay calculated. These buckets are now increased to 13 as per requirement.
Change-Id: I7f9a01c21b748a0f589bb44e6f7dd69a1c5702a7
CRs-Fixed: 3163423
cal version is included in EXT2 svc ready message to indicate the bdf
and ftm version to host. Add API to extract this from ext2 message.
Change-Id: I83f4d6e83a3f78f993b40527aed7291c6496777c
CRs-Fixed: 3182634
pdev_id and hw_link_id is included in same uint32. Lower 16 bits are for
pdev_id and higher 16 bits are for hw_link_id. Use proper macro to get
pdev id from mac_phy_caps.
Change-Id: I91806c0fba63767efa0105df5697dd685f38b819
CRs-Fixed: 3182651
Drop 3 address multicast packet on rx when vdev is
has drop_3addr_mcast enabled.
Change-Id: I726bdc9383ea6e5a052a5d754e8f48c98f9ce874
CRs-Fixed: 3163011
Currently, in STA+Monitor mode, the first MSDU in MPDU is
unmapped and goes down. This MSDU is now processed as rxdma
err packet and crashes due to double unmap as rxdma err ring
is configured as monitor dest ring in monitor mode.
To fix this, validate rx descriptor unmapped flag in rxdma
err processing.
Change-Id: Ic503aa18e2269d8bda6aaf9b349c1ad8be11dcff
CRs-Fixed: 3175972
When we try to unregister a module that was not registered earlier, we will
try to unmap the buffers that were not allocated. As a result, we end up
with invalid memory access. Fix this issue by checking if the module was
registered before unregistering it.
Change-Id: I97c4ee7a6690c6cba2a7d1a919a39fcb12ebb692
CRs-Fixed: 3179498
For Kernel 4.14 the compilation is failing due to IPA definition
are not present in WLAN code and hence added the support for 4.14 kernel
Change-Id: Ibadf43d5009659f2c71f4296fb6e71cbe7eaf189
CRs-Fixed: 4028379
If the multi-client Low latency feature enabled in driver,
FW sends WMI_VDEV_LATENCY_LEVEL_EVENTID to report latency
level honored by FW as a response to a request
command WMI_WLM_CONFIG_CMDID.
Change-Id: I06f7bbc2365e8b71e0ae6386ef42ef4238dafd35
CRs-Fixed: 3180940
Add new files in Wifi-Pos module to support PASN authentication.
Introduce new API to handle 11az ranging peer create, to handle
PASN peer create response and manage the PASN peers to initiate
external authentication to userspace.
Change-Id: I0b638d3cfca2753074fdb56ad78373f842ca80ee
CRs-Fixed: 3150241
Add new public structure file for Wifi_Pos module to define
11az related structures & enums, vdev private object for
Wifi Pos module.
Change-Id: Ia8b8ebb3b36cc8f1d9598629e63d15a0f16301c7
CRs-Fixed: 3150228
Fix for crash seen during MLO NAWDS peer creation.
Peer assoc for MLO NAWDS peer is done in a different way
hence avoid peer assoc in wlan_mlo_peer_create.
CRs-Fixed: 3179437
Change-Id: I76356e68ef267fe2b4d37bfe29faca5ed8c02347
Add change to fetch and save the WMI service capability
bit of FW to support multi-client low latency feature
using service bit.
Change-Id: Ifce82c06fc913668949ed06634da1eebcea80397
CRs-Fixed: 3180932
This change is to vendor attribute for peer TID flush vendor
cmd QCA_NL80211_VENDOR_SUBCMD_PEER_FLUSH_PENDING.
Change-Id: If112ec288a64622b9bf7fe625f7ac9e127d0ecbe
CRs-Fixed: 3170381
calculate rssi_comb and rssi per chain values using
parameters received from the fw.
Change-Id: Ide56549c7d7ee9bde609dc6764013d509f7ccac0
CRs-Fixed: 3157484
