Add prints to track:
* Incoming TLVs in the monitor mode status ring.
* HE, HE-MU and HE-MU-Other values being passed to the
stack.
Change-Id: Ib23336353dc4a2253a62444b767d2a706ce372ea
CRs-Fixed: 2242514
Before showing DP statistics, per VDEV and per peer statistics
counters will be aggregated together and stats.rx data member of
PDEV will be set to all zeros. So only need to update per peer
statitics counters in RX stats_update.
Delete the obsolete PDEV stats.rx update operations.
CRs-Fixed: 2237020
Change-Id: Iba6437e6010dd8f87a3f152a529a8b0bc632972d
Enable raw mode cce classification only for packets for
which WEP bit is not set
Change-Id: I5249f197d5a3e00c73c6866011ba5f3a36868c0f
CRs-Fixed: 2132317
Address the following issues in the dp folder:
CHECK: 'availble' may be misspelled - perhaps 'available'?
CHECK: 'catagory' may be misspelled - perhaps 'category'?
CHECK: 'endianess' may be misspelled - perhaps 'endianness'?
CHECK: 'exceded' may be misspelled - perhaps 'exceeded'?
CHECK: 'explicitely' may be misspelled - perhaps 'explicitly'?
CHECK: 'Inteface' may be misspelled - perhaps 'Interface'?
CHECK: 'lengh' may be misspelled - perhaps 'length'?
CHECK: 'messsages' may be misspelled - perhaps 'messages'?
CHECK: 'miscelleneous' may be misspelled - perhaps 'miscellaneous'?
CHECK: 'Ouput' may be misspelled - perhaps 'Output'?
CHECK: 'poiter' may be misspelled - perhaps 'pointer'?
CHECK: 'Poiter' may be misspelled - perhaps 'Pointer'?
CHECK: 'psuedo' may be misspelled - perhaps 'pseudo'?
CHECK: 'registerd' may be misspelled - perhaps 'registered'?
CHECK: 'requred' may be misspelled - perhaps 'required'?
CHECK: 'retreive' may be misspelled - perhaps 'retrieve'?
CHECK: 'succesfully' may be misspelled - perhaps 'successfully'?
CHECK: 'vaild' may be misspelled - perhaps 'valid'?
CHECK: 'virtaul' may be misspelled - perhaps 'virtual'?
Change-Id: I66b9cdc6115dd133b385e60c9d02cefd1bd0bac3
CRs-Fixed: 2241574
Drop MPDUs received with rxdma_overflow_err, rxdma_flush
or rxdma_mpdu_length_err errors on monitor RXDMA2SW ring
since Rx TLVs are not populated properly by HW.
Change-Id: I3d4399f4c2b4bbe21e9f6b1b24369a633e964154
CRs-Fixed: 2233141
In case of raw mode HW does not set the l2 header offset.
ignore this field in rx for rawmode.
Change-Id: I6e08a9540f55fdb97b21e4939256e6e5b9076e77
CRs-Fixed: 2243850
HMWDS for legacy was broken during bring up of DBDC on Hawkeye
platform.
Add cmn_tx_ops to support add, delete and update of AST entries.
Change-Id: Ia2a465a1f5f3d304a35d02c33bff73c56bb010a3
CRs-Fixed: 2225830
"(" character should not appear in macro parameter list. Remove
this illegal character to avoid compiling error.
CRs-Fixed: 2239574
Change-Id: Ie50feb5dacda52edb0b1a4fcdfd516e909c7bda8
Add sanity checks for pool id & index extracted
from the SW cookie field within buf_addr_info.
Change-Id: Icf21b94fa05f6f8887b8c7a17896348f25436dda
CRs-Fixed: 2220030
In VHT case, for some packets SGI value is 3, which
represent 3.2us value. Which is not applicable for VHT.
So if value 3 received from HW for SGI, than convert that
to default value, which is 0.4us.
Change-Id: I92716f8041f0db20b60dcd5e5d6681fa1bfa708f
Set pdev mask in the HTT Stats request based on
mac id number provided from the user.
Change-Id: Ie8f1208fd3598efd2ea3736719c8b444ef86881a
CRs-Fixed: 2237467
Enable multiqueue on VAP with 4 Tx and Rx queues in lithium.
In Rx path set the rx queue of skb based on the reo ring id on which it
is received.
In Tx path use the queue_mapping of skb to map to the hardware Tx ring
on which it has to be transmitted.
Change-Id: I103a21e91d1ed5c0e1d8441863d4fcd273b7bed9
Cleaned raw mode specific code and moved the rx
processing to single API dp_rx_sg_create
Change-Id: I7696786d9a0f10983d3299956b46b2ec76b388a5
CRs-fixed: 2204824
There may be race condition in setting htt included when tx desciptors
getting prepared in two cpu cores. This is fixed by not setting the
bit globally.
Change-Id: I861cb2f0cf51a5a14a8fb6fbc6b64b00b82af675
CRs-Fixed: 2229350
Return buffer manager for error packets has been changed
from HAL_RX_BUF_RBM_SW3_BM to HAL_RX_BUF_RBM_SW1_BM.
Fix is to use DP_WBM2SW_RBM to check correct rbm.
Change-Id: Ib5ffe7161f85fe6a374f16a06a1f6f4f701abe0b
CRs-Fixed: 2231571
Remove NAWDS Rx Drop Count as it is not required,
drop packets in rx where length is not
available.
Change-Id: Ib4b41eefe88410137c3845090783ee43adb9147c
CRs-Fixed: 2191474
Avoid vdev aggregate stats for every ppdu stats event as it is
consuming high CPU in veriwave max clients testcase. Instead
aggregate the stats when ifconfig athX command is issued. Add
CDP API to aggregate and update stats called when needed
Change-Id: I801d5f8fab0c275942b77a9975293f95bd4026b0
CRs-Fixed: 2220704
GRO aggregations are hanging out of NAPI instance and we cannot use the
hif NAPI instance in Rx thread as gro_list inside NAPI is flushed out
at the start and end of NAPI poll, this will corrupt the gro_list on
which rx_thread is working. Address this concern by creating dummy
NAPI instances mapping to each hif NAPI and by not scheduling them.
Change-Id: I517c4c6158ed3ac073f5f617afde46c7ed07ff3e
CRs-Fixed: 2128457
While doing RX NSS statistics counting, only MU_MIMO and MU_OFDMA_
MIMO frames are taken into consideration. So all NSS counter for
SU frames are missed.
Add RX NSS statistics counting for SU frames.
CRs-Fixed: 2228332
Change-Id: I5ee9b8f03177d31f5891a2e4e616b5740fec35f6
Make sure to clear the tx_desc->flags field before putting the tx_desc to
free pool. This was not takencare in V2 flow_control implementation.
Change-Id: I666b9b09de62d52cffc45e2b6db3a6be06d688e8
CRs-Fixed: 2186884
In flow control V2, dp_tx_flow_pool_vdev_unmap marks flow_pool_id as
INVALID_FLOW_ID. To free descriptors inside pool dp_tx_desc_pool_free
uses flow_pool_id to get hold of pool.
Change-Id: I892052055b34638a1ba876fac6bfcd2ae3b0d5b3
CRs-Fixed: 2228943
Initialize the peer map and peer hash memory based on the config
received from target in service ready event
Change-Id: I8e1b62cd9586f5b2be7acb863a106d2486be1b35
CRs-Fixed: 2223428
a) Configure RXDMA_MONITOR_STATUS to support mpdu_start.
b) Need Monitor other filter in RXDMA_MONITOR_STATUS
to support monitor vap.
Change-Id: I7ac90203f085850906f8c55209a57bb6a5464098
nbufs received on wbm_release ring were chained based on
first_msdu and last_msdu bits if the peer is invalid for these
frames, but these fields in the rx tlv header were in-correct as
hardware does not decap these msdu's.
Based on inputs from firmware we now changed this logic to
using phy_ppdu_id field from the rx_mpdu_start tlv & rx_attention tlv.
Change-Id: Ifc7faa2d1b0585bcc226e5cb2045fcb29d152273
