Currently hal shadow pointers after memory allocation
are not memset to zero. In case of SMMU S1 enable when
host starts to access hal srng the random value of shadow
memory is copied to host cached values which leads to accessing
the rings even when HW has not updated to it. So zero out
the memory of hal shadow ring pointers after memory allocation.
Change-Id: I10ac6bfff957e953ee9caa15056ce3fa9d57b70e
CRs-Fixed: 2368491
As a hot fix before h\w part change, just limit maxinum nss number
to 2 for MCL platform.
CRs-Fixed: 2377796
Change-Id: Iad205804be90b6803ff2f1afa79076dde9b77013
once in a while the HW is sending a descriptor which
is already processed by host. This can be a potential HW
issue, as a WAR we are not processing such duplicate descriptors
instead increment a counter and continue with next descriptor.
Change-Id: I6c9bc6a9fb4705b42284171a32855411aa5dd73f
CRs-Fixed: 2338543
According to the ucode and mac team, the new TB-PPDU (UL OFDMA
Dat frame) from any other users using the TLV's fields below:
* PHYRX_RSSI_LEGACY (has a reception type field that is
set to UL-MU)
* PHYRX_RSSI_HT
* PHYRX_COMMON_USER_INFO (has a reception type field that is
set to UL-MU)
* PHYRX_USER_INFO (has more detailed modulation info)
* PHYRX_USER_INFO (Could be more than one)
...
* PHYRX_DATA
* PHYRX_DATA (Could be more than one)
CRs-Fixed: 2329959
Change-Id: Ib5fa1734a5525d2b2d1db8756166f259be30b9c0
This change will resolve displaying NSS value
in stats in case of HT. And also it will give
proper NSS value to calculate rate value. Modify MCS
value to match with Tx stats from firmware.
Also retain original MCS value to use in radiotap code
for HT case.
Change-Id: I4dad068262a5e9188a5935db6b2cbf8d14138e7e
Currently we are printing one single big print to dump the RX TLVS. This
is causing truncation at the QDF_TRACE level, which can accommodate only
512 bytes or so right now. Split the RX TLV print, so that it can fit
int the QDF buffer.
CRs-Fixed: 2370080
Change-Id: I1385ab0dfe2a52e34132487ac55973e291d84db5
Added missed hal_get_hw_hptp_generic
'Get HW head and tail pointer value for any ring' to ipq6018.
Change-Id: Idc4b595ab6c52558542cf6f87e36f590bf93123f
Functions hal_update_srng_hp_tp_address and hal_set_one_shadow_config
are dumping a lot of information, which is not needed.
Reduce INFO log levels to DEBUG.
Change-Id: I210cd5493d758685312b7851eb37e05ce93b6071
CRs-Fixed: 2342960
In monitor mode, the packet type is wrongly filled radiotap header as
11n when the actual incoming packet is 11b frame.
The packet type field is common for all MPDUs and is obtained from
PPDU_END_USER_STATS and hence no need to overwrite that value from the
MPDU specific TLV in the function hal_rx_mon_hw_desc_get_mpdu_status
Change-Id: I97f96e64012636f562f7ac2e4a91b63ffc7553db
CRs-Fixed: 2333915
To avoid race conditions where BA window size can change, always
flush entire REO descriptor from HW cache irrespective of current
BA window size.
Change-Id: I608996722e7dc2dc6acfd145b8c190b58ce09822
CRs-Fixed: 2251811
- Support to pass IPA enabled(disabled) flag from ini to DP layer
- Use ioremap call to translate tx_comp_doorbell_paddr obtained from
calling ipa_setup api to tx_comp_doorbell_vaddr. This is needed to
write the initial value of HP at the doorbell address.
- Change REO_DST_RING_SIZE and WLAN_CFG_TX_RING_SIZE to 1023
for napier/hastings if IPA is enabled. This is needed because,
ipa_setup API can handle only 16-bit values for the size param(bytes)
of the ring.
- Disable hash based flow steering for SAP peers in case IPA is enabled
and set default reo_dest_ring_4 as default RX ring. Since IPA will be
reaping RX packets from reo_dest_ring_4 only, flow steering is not
needed for SAP peers.
- Unmap pre-allocated TX buffers for IPA in the TX completion ring.
- Donot execute IPA functionality if IPA is disabled from ini.
Change-Id: I6855bfe293a457ccc0abd1ad5567f5c95232a9d2
CRs-Fixed: 2183519
So far, only HE_TRIG packet type parsing is supported for TB-PPDU
(OFDMA UL)frames, which is not enough for plugfest tests. Add all
radiotap dissecting from HE Data 1 to HE Data 6
CRs-Fixed: 2316408
Change-Id: I49d91d4981291827b20f325d459fd1e60f3cc271
Functions hal_rx_wbm_err_info_get, hal_tx_comp_get_release_reason,
hal_rx_dump_mpdu_start_tlv uses some hardware macros directly and the
value differs between qca8074v1 and qca8074v2 targets.
Move these functions to generic api file and compile it per target.
Change-Id: Ib78fb6e69238577aac64da3f60f38a72cee316b0
keep hal tx and rx functions grouped as it will look clean
and avoid confusions while browsing code for others.
Change-Id: I519690d42cd077689bf7afe697908f43d7055da5
Do null check before servicing the ring. When dp_service_srngs()
is common API which gets called when interrupt gets fired for
any ring. Within this API, driver goes one by one to each ring
and service the rings as it is not obvious from interrupt line that
which particular service ring needs to be served.
So race happens when rings are getting initialized and packet has been
arrived to one of the rings. Due to dp_service_srngs() API's
implementation, driver goes to one by one each ring without checking
if all rings are initialized.
CRs-Fixed: 2310496
Change-Id: I3c8f668756c8d266abe082e8473d54cb4df9065e
Instead of frame control info valid parameter data sequence
control parameter was passed, corrected it
Change-Id: Iccaeb286c1003cbb58c5ebcacf4b0d99c979cbbc
- Change the SR mapping address for QCA6390
- Use ring direction field from HAL ring config instead of HAL ring
directly as ring is not yet initialized here.
Change-Id: I900b2329367cc02ae2f9d7f164e5f867d8253d90
CRs-Fixed: 2299919
1. Disable host processing of REO2SW4 when IPA is enabled.
2. Change buffer memory location provide to IPA TX transfer
ring from consistent to non-consistent memory.
Change-Id: Ibb62d9faf5dc9adb5ee8a2e113d10a2912269cbd
CRs-Fixed: 2315889
CE service file includes APIs for both legacy and lithium
architecture.
These are getting compiled for both targets today. Separate the CE
services into legacy and srng and selectively compile based on
targets present in the SoC.
Note: Generic APIs implemented for both legacy and SRNG services
are separated out through this change. Fast path implementation
will be de-coupled from common service and moved to legacy source
in a follow-up change.
CRs-Fixed: 2258640
Change-Id: If86c21c0bf560a360474c9efcdbcd4841a09828d
For HE case, SGI enum values are different in FW and Host
So that firmware stats and host stats shows different values
To resolve this, change SGI enum value in host to match
firmware definitions.
Change-Id: I1b38dbe32a6c1ab2610c1c3a736a6898ddc73e30
Rx reception type for packet was populated from
wrong TLV. Populate reception type based on
HT,VHT or HE TLV tags
Change-Id: I3240a9f029b0bfeee8833761531e086bc5df6f91
HE format in radiotap header are not being updated for HE_TRIG
frames. Add support for it. This is to support MU-OFDMA frames of
UL.
CRs-Fixed: 2223635
Change-Id: If0a93f6047185bcc51948b613d48d13ecb5e16cd
Set monitor direct filter when smart monitor is
enabled. Deliver header from NAC if md bit is set
and smart mesh feature is used.
Change-Id: If1ef865e013c21bbb58bcb89a87856b12d6c7278
Crs-fixed: 2246660
Some of the macro names defined in qca8074v1, are defined with
a slightly different name in qca8074v2, and few macros have the
same name in both headers but are defined with different values.
Fixed the same.
Change-Id: I5e948baf5326d1d8fdfa2bd7ee8aa072c710d17c
Set 'need_status' while sending REO queue update command
for deleting REO queues to get status from HW, which will
trigger callback to cleanup and free the queues.
Also fix issue in initializing REO command descriptor, causing
command number to be cleared.
Change-Id: Ie30fc80f76d835e239dd0b3d3e78c7f32bfa09a4
NDP is a preamble only PPDU, which do not have payload information
from RXDMA destination ring. The detailed TLV sequence is:
* RSSI legcy
* LSIG_A
* HE_SIGA_SU
* RSSI_HT
* GENERATED_CBF_DETAILS
* PKT_END
CRs-Fixed: 2296348
Change-Id: I19f253c65969b59947bd9a21cf3912b16eb21324
When a ppdu id on a ppdu in status ring find a matching ppdu id
in destination ring. The old logic can cause ppdu id is destination
ring stuck on high value before wrap around. The new logic check
ppdu id between status ring and destination ring is no more than
20000.
Change-Id: Ia601403b0a4fc6cdfff980c7745e055c814137b7
Upon receiving 2k jump exception, send delba
and track delba tx status and retries.
Change-Id: Ida35256233869dfa390c40030c9296b9c48481ce
Crs-fixed: 2239856
Add the following fields in Radiotap header:
Antenna noise (in dBM)
Vendor Namespace containing the following information
->L_SIG_A
->Device_ID
->L_SIG_B
->PPDU_START_TIMESTAMP
CRs-Fixed: 2285143
Change-Id: I977be73778ab27383f12214c73b56c9b80d9f02d
Clean up datapath component prints by correcting trace levels for
regularly occurring prints and removing newlines from converged
print APIs since qdf_trace_msh appends them by default.
Change-Id: Ie8fe319fcb737720f7400a165e134b6a18bd15b5
CRs-Fixed: 2243843
There are some particular PPDUs which have preamble only:
* NDP frames
* TB_PPDU frames
Add support to the above frames.
Change-Id: I7022433d3765575eaf28d7baf3a11e8b6ce13890
CRs-Fixed: 2275161
