Event based mechanism to reduce delay by removing sleep
while getting response from firmware
Change-Id: I9d553764127efaf06794f41c81cf646cf9dc695e
CRs-Fixed: 3233643
In IPA offload, both tagged and untagged traffic cannot be handled with
a single rx pipe. Hence, add support for 2nd RX pipe for tagged and
untagged traffic respectively.
Change-Id: I77ff633327696f66df42fb592492321c1591646b
CRs-Fixed: 3226021
Currently in monitor mode for KIWI, interrupt for RXDMA2HOST is
enabled to process both monitor status srng and montior destination
srng, but low threshold interrupt for monitor status srng is also
enabled. so when available RX buffer in monitor status srng is less
then low threshold, it is possible that two kind of interrupt from
RXDMA2HOST ring and monitor status ring will call
dp_rx_mon_status_process_tlv() in different context and access to
mon_pdev->rx_status_q at the same time, this will lead to skb
double free issue.
solution:
(1) disable RXDMA2HOST srng interrupt in monitor mode.
(2) enable monitor status srng batch count interrupt for monitor
processing.
Change-Id: I1df8830cb7cc55468e5df5e49045c3d96f7c29a8
CRs-Fixed: 3245393
Set function pointer for SCS peer lookup and rule handler.
Add a new module id for SCS.
SCS database maintained in dp_peer structure is redundant as
same info is maintained in control peer. Therefore remove
SCS database from dp_peer structure and also remove APIs
which access/update this database.
Change-Id: I951f12de487a4be3ae169d1e309352e4e5031fc9
CRs-Fixed: 3226693
To avoid unmeaningful rate fluctuation, when report
rx linkspeed to upper layer, exclude special frames:
arp/ssdp/dhcp/eapol/ipv6 NA/NS/DHCPV6 in low rate.
Change-Id: I4bc49a808a02b4bc8c687f70690922045d65e739
CRs-Fixed: 3198484
If vdev is updated in mld_peer, then vdev in txrx_peer of mld peer
should be updated and synced accordingly.
Change-Id: I003ab5f3d96f0b62a5ed1dad2b1e8d4f57f58dad
CRs-Fixed: 3242644
To support WDS feature in IPA driver, WLAN needs
to update the ast entry for any new rx packet, and for
end-nodes connected via repeater to root.
CRs-Fixed: 3226348
Change-Id: I7383b12f18e7c70ec06499d66130667eca033131
Add support to track the high watermark for the number
of entries which are used at any given instant. This helps
in identifying if the ring size is sufficient or is being
full for certain use-cases.
Change-Id: Id3ffa52c653696699fbcfbb556a815d5f7908863
CRs-Fixed: 3235115
Add delta_tqm, delta_tsf2 and mlo timestamp offset for BE.
These offsets are used to calculate hardware Tx completion delay.
delta_tsf2 and delta_tqm are updated during init. mlo timestamp
offset is updated whenever target sends the update event.
Also, adding CDP ops to set the offsets.
Change-Id: I55665982798c3a795481fa96c023bb851ea17476
CRs-Fixed: 3220906
Currently the INI value for reo destination ring size
is over-written to 1024 during ini. Hence any ini change
to modify the RX ring size does not take effect.
Fix the over-write of the INI value for reo destination
ring size.
Change-Id: If4c166687a05f37b902ae1f7ed881db88436eaaa
CRs-Fixed: 3235427
Add host support to display selfgen_be_stats,
selfgen_be_err_stats and tx_sounding_stats.
Change-Id: If6b6da59be609161537f1e3b28031ac3d029328b
CRs-Fixed: 3210158
Add history to track the monitor status buffer entry.
Currently the below 3 events are added:
- Monitor status buffer reap from ring
- Buffer enqueue to a local list
- Buffer dequeue from local list for parsing.
Change-Id: I7c17070ffee25a9a9dc4af0b48bfa8808e18887d
CRs-Fixed: 3225647
Currently, bandwidth and corresponding MPDU retry threshold was
taken from tx packet status in per packet to update peer stats.
With this change, set bandwidth and MPDU retry threshold
during peer registration.
Change-Id: Iffd06968246d0b86b26716ae6672e2cd23360c67
CRs-Fixed: 3225479
UMAC HW reset feature will be using the last interrupt context in each
DP interrupt combination i.e., on a system with more than 8 MSIs for DP,
UMAC HW reset will be assigned a dedicated interrupt context.
Add the necessary support for the same.
CRs-Fixed: 3163900
Change-Id: I26abd01e4261661ed95e1aa3cb2a774e78b50d9f
Add packet logging support by registering
Rx and Tx callback functions for packet logging of
initial 32 Tx and Rx packets.
Change-Id: I91b59b7c5f65f505e3ee730c497347be28955128
CRs-Fixed: 3224881
In the case of qwrap repeater, send the original packet on the
interface where it received and send the packet with dummy src
on the mcast primary interface
Change-Id: I08f64559ff2a9430b140c962117d4d71ab684b8d
CRs-Fixed: 3214360
The telemetry agent on certain intervals needs to pull the
SAWF stats from the driver.
Add CDP ops to pull the SAWF stats from the driver.
CRs-Fixed: 3210834
Change-Id: Ibc27059ff13b33acc4e71d3174a0415756dcfc5e
With restructuring in HIF runtime PM module, modules are
required to register with the HIF runtime PM module. Also,
changes are done in functions of allowing and preventing
runtime PM suspend as part of restructuring.
This change registers DP, HTC and HAL internal modules
with runtime PM module and update HIF runtime PM function
calls with the restructured code of HIF runtime PM module.
Change-Id: I8899a1d3b92a90a05c5eaf4df7609f4008f739f8
CRs-Fixed: 3169372
Split tx and rx monitor buffer add function so that
they can be indivudually called when lite monitor mode is enabled.
Change-Id: I9996d0261f1912237bd6fa45058d410698b9fa28
CRs-Fixed: 3206170
Since more than one components depend on reap timer of
monitor status ring, add bitmap to record the trigger
sources of the timer and refine the APIs/calling functions
accordingly.
With this change:
When a new start request comes, if the source is
CDP_MON_REAP_SOURCE_ANY, skip bit set, and start timer
if any bit has been set in the bitmap; while for the
other sources, set the bit and start timer if the bitmap
is empty before that.
When a new stop request comes, if the source is
CDP_MON_REAP_SOURCE_ANY, skip bit clear, and stop timer
if any bit has been set in the bitmap; while for the
other sources, clear the bit and stop timer if the bitmap
is empty after that.
Change-Id: Idaa7837c4b93b247ff2236aa5072d309fa9548c2
CRs-Fixed: 3190347
This enables the option to configure when a peer's
TID queue needs to be flushed. This is required to
discard packets that are no longer useful to the application.
Change-Id: I558debff043fc0c8038e5f5f2c815b64c90e1561
CRs-Fixed: 3130422
Use CONFIG_SAWF macro to prevent linking dp_set_delta_tsf in
low memory profile.
Change-Id: I07b75f893e6d043839225d9b7288823b6ef2f823
CRs-Fixed: 3211426
NAPI scale factor should be configured based on the board
type. for example Hawkeye could have a different scale factor
compared to Alder.
CRs-Fixed: 3212330
Change-Id: Ie0bad6aade9ca9379997aa974154f9fb903ab93e
When user makes a request for stats using Link peer mac address,
then fetch per pkt stats from MLD peer for Link peer.
Change-Id: I64e0b10eaca82c87e7066d3ca1dbefad63a186a8
CRs-Fixed: 3208757
For telemetry agent, some more statistic support is required.
Hence, add support for telemetry agent required stats.
Change-Id: Ieb2210a4a5dfe6fa0a0dd46a85f2d9ae483bb746
CRs-Fixed: 3210797
Add ini support to configure TC ingress filter priority
value which would be used for TC based dynamic GRO.
Change-Id: I1742f4539353939e3a40ff4096b3f833f2029b12
CRs-Fixed: 3206817
Add cdp api to get accumulated pdev tid stats along with per tid
total tid rx and tx stats.
Change-Id: I7862c4265f199d0588d8865c5ed97e06010dd79f
CRs-Fixed: 3207499
Add support to get per pkt stats from MLD peer for primary link peer
only when user requests for link peer stats.
Change-Id: I6df0daa4a175cc5869012538294ed41ae2443e48
CRs-Fixed: 3203506
In case Multi chip MLO configure same hash key for
all SOCs in MLO. This change is needed to avoid
same flow traffic distributed to multiple REOs.
Change-Id: Ib6cde4ae32e58ef2d45c02d640c133458f5bfac5
CRs-Fixed: 3201978
Add support to move FISA FST from DDR to CMEM, enable it for Kiwi
Adding CMEM support for FISA FST includes
1) Reserving CMEM memory space FISA FST
2) Add HAL macros for CMEM flow search entry
Change-Id: I45fc91a86c1ac89d3d95b246e26ea981314425a8
CRs-Fixed: 3199250
Define a new function to calculate HW delay so that same logic
can be used to calculate delay by other modules.
Change-Id: Id3740bcaa2cd558b89ab02d8e88d5947eb5997b1
CRs-Fixed: 3198305
There is init failure about monitor status ring after started CFR
capture. So extend num_rxdma_status_rings_per_pdev to 2 for KIWI
which is same to HSP.
Change-Id: Ic24d732957dc1991a3fca350aebe5f57d9b02577
CRs-Fixed: 3203678
Set per_tid_basize_max_tid so that BA size is configured per TID.
Accordingly fix dp_check_ba_buffersize to ba_window_size to incoming
buffer_size. Assert for any BA window size above 1024.
Change-Id: I40cb2aac012c50e253c3ef22d44cf5db3abfb7bb
CRs-Fixed: 3182601
Use microsecond timestamping for the tx descriptors
for capturing the latencies more accurately. It will help
to determine the appropriate bucket.
Change-Id: I216e083a7c89b01b6f2f384c1c0a85ca323d3a3e
CRs-Fixed: 3165153
In VoIP cases, no or minimal packet drop is expected during
roaming. Currently, data packets are dropped in host if they
are received after roam sync indication from firmware and before
peer map indication is received due to invalid peer.
This change allows rx UDP data packets during roaming before
peer map indication is received from FW if peer's auth_status
received in roam_sync_indication from FW is authorised.
Change-Id: Ic518b7cd0aef48a2b0f8c923a2e20838b07f3d1f
CRs-Fixed: 3168603
In QCN9224, when 11v DMS feature is enabled use
FW based DMS support instead of SW based WAR.
Change-Id: Icc5b9740f71bd00862e06950e4fe49c663d513b4
CRs-Fixed: 3182547
Currently, in case where AP advertizes BA window size
which is different than our max supported BA window size,
the HW gets configured for BA window size advertized by
the AP, whereas the ADDBA response indicates the window
size of the STA, which is less than the AP.
This mismatch leads to the BA bitmap to be incorrect.
Fix this by exposing an API from datapath for the update
of the final BA window size which is populated in the
ADDBA response.
Change-Id: I81a039f47a775990b426e9aca1daaaa9bdb6e88f
CRs-Fixed: 3187941
For KIWI, STA AST index lookup search is enabled and remote
AP peer's AST index will be stored in STA Vdev if receive
AP peer htt peer map msg. but if STA TDLS connection happened,
host will receive another peer map msg for remote TDLS STA peer,
this remote TDLS STA peer's AST index will overwrite original AP's
AST index. if TDLS disconnected, STA vdev will still use remote
TDLS STA's AST index for TX, then TX to AP might fail.
Add is_tdls_peer flag in dp peer and configure this value by
cdp_peer_set_peer_as_tdls() from control path right after TDLS peer
created. if is_tdls_peer is true, do not store this TDLS peer's
AST index to STA Vdev, skip bss_peer flag setting as well.
Change-Id: I7b5df1caca6a0b5305a6e867cd92099b5f6a4890
CRs-Fixed: 3151035
Per peer extended stats are maintained as a histogram having 10
delay buckets. Each packet will fall into one of these buckets as per the
delay calculated. These buckets are now increased to 13 as per requirement.
Change-Id: I7f9a01c21b748a0f589bb44e6f7dd69a1c5702a7
CRs-Fixed: 3163423
Drop 3 address multicast packet on rx when vdev is
has drop_3addr_mcast enabled.
Change-Id: I726bdc9383ea6e5a052a5d754e8f48c98f9ce874
CRs-Fixed: 3163011
With new configuration changes for enable_peer_extended stats, update
code to peer_extended_stats naming for clean codebase.
Change-Id: I97a7ee331042232098382683fefebd05e6b099c3
CRs-Fixed: 3149920
