The firmware sends a new status code to indicate an already suspended
TWT session. Update WMI_HOST_PAUSE_TWT_STATUS status code to represent
this state.
CRs-Fixed: 2786636
Change-Id: Id1fbdde8691084e408144454214d59c8ad532f9b
Change Ic166c112189ef79a84f61d16e7e04a6334c61178 renames
few files for osif in connection manager, but does not
take care of the compilation issue after rename of the files.
Add a change to take care of the compilation errors in
connection manager module.
Change-Id: Icecb3f7aa625a65b835c15890fc019917e2b9446
CRs-Fixed: 2786828
Fix compilation error in connection manager.
Handle function name changes missed as part of
Icabeb57965920ec82e690bee662528189b081f32.
Change-Id: I6f1bc631de9dd7cc9ba7c80e01e857fe1b543782
CRs-Fixed: 2788660
QCN9100 pci radio is connected to the IPQ5018 through PCI slots
and enumerated by the Q6 radio. From the host driver perspective,
QCN9100 is treated as an AHB device, however the QCN9100 uses
MSI interrupts to notify events
-Reinitialize pci irq ops for hybrid bus type device qcn9100
-Update CE flags of qcn9100 to interrupt mode
-Set disable_wake_irq flag for qcn9100 as wake irq is not used
Change-Id: I8da7f0b48923b9d70e62f4ff181bd47865ea2fe8
Log WMI work queue call stack when WD timer expires to assist
in debugging on non slub debug enabled builds.
Change-Id: Id3dd575700ca586b0738a88ca2af88a757238d1b
CRs-Fixed: 2789114
Delete self ast entry along with other ast entries
belonging to peer during peer tear down
Change-Id: I08373929b7e510d79cd677b12f3ee897c1c6790b
CRs-Fixed: 2776743
Buffers attached to CE2 destination ring are of 4k bytes.
skb allocation for these buffers exceed 1-page allocation
due to addition bytes reserved for alignment, padding and
skb shared info.
Set the CE2 buffer size to 3200 bytes so that the skb memory
fits into a single page.
Change-Id: I97b3fc140376bb107ba23ab581a2dd5aeb833948
CRs-Fixed: 2785267
While processing monitor status srng when DMA is not done
for current peeked HP+1 and DMA is done for HP+2 then nbuf
at HP+1 is freed without processing. But nbuf should be unmapped
before freeing. So unmap nbuf then proceed for freeing.
Change-Id: I9e808a7c9b6452d6b6e1fddc49fb08871c8c90f9
CRs-Fixed: 2785364
Adds rsn cap info in scan entry security info, to get the
rsn caps directly from scan entry without need of parsing
RSN IE again.
Change-Id: Ideeb0780841a70fda94d8580dbb025d162716d06
CRs-Fixed: 2786586
dfs_curchan isn't reset when start vdev on 2G channel, can't use it.
Reproduce steps:
1. DUT vdev1 SAP started on 5G DFS channel with HE160,
WMI_CHAN_FLAG_DFS_CFREQ2 is set.
2. DUT vdev1 SAP switched to 2G channel.
Found WMI_CHAN_FLAG_DFS_CFREQ2 still set.
Change-Id: Ic5282ddf667af92365f3e43274a010a26a5a0715
CRs-Fixed: 2787305
In the initial connection association request, since the STA
doesn't have pmkid, it sends the 2 byte pmkid field as 0.
But some APs dont allow pmkid count field to be 0 during
association and pmkid field having some value in EAPOL
handshake and triggers disconnection with reason code 17(
Information element in 4-way handshake different from Assoc
request). With crypto component disabled, the legacy
rsn ie construction doesn't add the 2 bytes with 0 value for
non-PMF connections.
So don't add pmkid count with 0 value in initial association
request for non-PMF connections.
Change-Id: I90441167ee480bf5d08e73e43d3ee9371bd16b0a
CRs-Fixed: 2783639
Add public util API for connection manager to get connection
states and set max connection attempts.
Change-Id: I66d4318c7465e3926d6bacdc70dbb849827bf2c4
CRs-Fixed: 2787323
When multi page alloc is activated, spinlock for rx_desc_pool
is being held for more than 2 seconds, resulting in QDF_BUG.
The major proportion of the time period is used in unmapping
the nbufs.
To fix this, lock rx_desc_pool only to collect nbufs from
rx_desc in a list and unmap and free the nbufs after releasing
the lock.
Change-Id: Iff2078a0de56b51712e2f9a7c5ace7a959e2445d
CRs-Fixed: 2779498
HW flow search table memory is not initialized to
zero due to incorrect argument order to qdf_mem_set.
This results in the possibility of HW flow entry
to be not configured properly even though SW flow
entry is configured properly.
Fix is to use the appropriate argument order to
qdf_mem_set so that HW FST memory is initialized
to zero.
Change-Id: If24f50c507392bd8d4974232d48d3af6f4f29b43
CRs-Fixed: 2773951
The number of DP data rings are configured through INI
files and the default number of rings are defined by macros.
Default macros for DP data rings are defined twice, hence
remove such duplicate macros
Change-Id: I62927751731b88ce74c4f2651aa74c19b301b89f
Currently ll_stats and get_station requests are sent back to back
from user space. The firmware time difference between these two commands
results in extra sleep and wakeup for Q6.
To avoid this extra Q6 sleep and wake, send both requests in a single
command from the driver if the firmware supports that operation. Cache
the get_station results in the driver until user space request reach
to the driver.
Change-Id: I5e6f42f9e3836ef4bf61d3d9220f8cedb775cbd5
CRs-Fixed: 2778479
The firmware sends a new status code to indicate an already suspended
TWT session. Update the status code enum to represent this state.
CRs-Fixed: 2784214
Change-Id: I7663ae1e1477919b7e93b0dcebd5287dc3e87263
Add event handling for mlme indication for connect start for
peer and its response. Add the interface manager missing
events. Add sync and async event handling for serialization
callback
Change-Id: I5cbb9a6ac1350f8035224135fb159010311a8468
CRs-Fixed: 2784163
Currently P2P doesn't support 6Ghz, disable adding RNR channels
list to reduce P2P scan time duration.
Change-Id: I14e2c1a8d122e99bfd29acb59af5a6f5877f9a35
CRs-Fixed: 2783592
Add a variable to indicate FST's placement in CMEM; all
FST CMEM operations will be based on this.
Change-Id: I6d8c541d939d3ab74eab22d13d5034b8ea79e99c
CRs-Fixed: 2784299
Issue: log level for some frequent prints is set to info
those logs would be present in dmesg as well as driver logs
and System performance may get affected due to excessive
logging.
Fix: Avoid redundant logs which may affect system
performance and change default log level to debug.
Change-Id: I053e95806884eab26c37340823b818c9e3c81036
CRs-Fixed: 2771412
Currently connection manager does not update crypto params
of connect request based on RSN/WPA/WAPI IEs.
Add logic to update the connect params based on IEs.
Change-Id: I74aba3c061ed5fc203be7270dcc244f14718c781
CRs-Fixed: 2777574
Add peer assoc parameter 'peer_bss_max_idle_option' to
update the peer's Max BSS Idle option cap to FW.
Change-Id: If7fd4369bade8b289655c491849562c2357de877
CRs-fixed: 2781050
- Compiler does not find declaration for functions
declared in wlan_objmgr_global_obj.h file,
causing errors fix is to add include header file.
Change-Id: I5cd7f8ed78f36444d9512d5fecec62ad7d1cadde
CRs-Fixed: 2779850
Deinit of HTT stats debugfs files from dp_pdev_detach to prevent
deleting of files after 'wifi".
CRs-Fixed: 2782235
Change-Id: I77d86225762063af16bc8c2b716ca834698f1520
This reverts Change-Id: I8eca9a085c0270f47318e64cefba686eac39a69a
That causes nbuf alloc size 64 bytes short of 2K, which leads
nbuf data to corrupt SKB shared info.
Change-Id: Iece451b4611c3fe9aaac00cc8aa7abbf79093b22
CRs-Fixed: 2779177
If the data ether header contains 802.1Q and 802.1AD tag,
current API to identify DHCP/ARP/EAPOL frame will not work properly,
for 802.1Q/802.1AD frame, there is extra 4 or 8 bytes in ether header.
Add 802.1Q and 802.1AD support for DHCP/EAPOL/ARP check.
Change-Id: Ibf00bd9e1497ba9700abca10d840104a73238f56
CRs-Fixed: 2771942
Introduce a vendor command for medium assessment through
QCA_NL80211_VENDOR_SUBCMD_MEDIUM_ASSESS.
Change-Id: Iacce974c862a9899de853be70858a47ae719b541
CRs-Fixed: 2766103
In Monitor mode, frag len is not adjusted taking l2 hdr
padding into consideration. This will result in inclusion
of l2 hdr padding length twice in skb len and would cause
skb expansion due to length exceeding 2048 bytes.
Fix is to adjust frag len taking l2 hdr padding into
consideration.
Change-Id: I31d57621bc71c51ff581a30adb654cd7b9448443
CRs-Fixed: 2781177
