Addba recieve/response logic has been implemented in
host for HE instead of in FW like VHT. setaddbaresp
is not hooked to the dp module yet to set the addba
response from userspace. Implement the required logic
for HE to support this command.
Change-Id: I49cceca299db06d41f2cafa690f5ba59e01f1f4a
CRs-fixed: 2163475
htt_h2t_rx_ring_cfg is invoked with suitable configuration based on
filter passed by wlan_set_monitor_filter.
Change-Id: I2fbb81e95903ae1bead92892fdb3165c8a515f14
Add support for periodic stats for data packets to be displayed in
wlan driver logs.
Change-Id: Ifb8fc5cabb8ecd31da83b5d307721c1d41a30f9d
CRs-Fixed: 2118581
1. Enhance CDP and DP txrx_stats interface to accept multiple
args. these agruments are passed to htt without any
interpretation.
2. Add reset stats support
Change-Id: I65db494824d03097e20dffc828bea380b16d411f
CRs-Fixed: 2136793
Currently there is no support for management MGMT TXRX
component over HTT endpoint and supports only over WMI.
As a result for platforms which does not support MGMT
over WMI will break other components which uses MGMT TXRX
component to send mgmt packets.
In this change implement changes to support MGMT TXRX
component over HTT.
Change-Id: I487aca3893aa21905a744e2e5dc7104e6c414fdc
CRs-Fixed: 2097694
Provide an API to accept the config parameters
from the upper layer and store them in wlan_cfg_ctx.
Enable/Disable the datapath features based on these
parameters.
Change-Id: Icbdc835a51a6fea87c06174e9fc63d5d007aec1d
CRs-Fixed: 2097229
Provide an API to accept the config parameters
from the upper layer and store them in wlan_cfg_ctx.
Enable/Disable the datapath features based on these
parameters.
Change-Id: I9336cac686bfb875cea242685a122ec98acdf8c2
CRs-Fixed: 2097229
Add CDP API for interrupt configuration to decouple interrupt
setup from soc attach / detach.
Change-Id: I422205ff5687fdc4a0936c68850455cc4e733e4d
CRs-fixed: 2046055
Adding support to parse stream of HTT TLV's recieved as response
to the HTT EXT stats request message
Change-Id: I44c990a1ed91c2381b89811de33c0717bd24be7d
CRs-Fixed: 1114641
Changes include
1. nss_cfg parameter to dp_soc.
2. nss_enabled field for pdev.
3. cdp api to enabled nss offload config.
4. skip rx ring configuration when nss enabled.
5. skip timter /interrupt configuration if
nss is enabled.
6. peer map/unmap event hander.
Change-Id: Ic4a919b6b7e846e18cb15ebcb94f8736a751ecb5
Add nac(non associated client) configuration to pdev. It will be
used to perform smart mesh filtering on rx packets.
Change-Id: I29989d379e10fcc4a0e4aa19dbb3499650d6bf39
CRs-Fixed: 2017269
Add support for 32-bit host architecture where dma_addr_t
is 32 bits and bus addresses are of 64 bits on MAC and IPA.
Change-Id: Icd976b42391e83a7ad15081e1feb0462b93c682f
CRs-Fixed: 2014038
Refactor flush rx queue function call based on soc by adding an
interface to CDP funtion indirection table.
Change-Id: Iea201553f555a6c317cf37e586433aa493e51623
CRs-fixed: 2023399
Separate out pdev detach processing as ol_txrx_pdev_detach()
and ol_txrx_pdev_pre_detach() corresponding to pdev attach
functions ol_txrx_pdev_attach() and ol_txrx_pdev_post_attach()
respectively.
Change-Id: I7fdbe70ad8262a57b61a742fcfb2779e323172af
CRs-Fixed: 2011937
Introduce a new iwpriv command txrx_stats to
print host and firmware statistics for lithium
chipset
Change-Id: Ib048c64f903c7a97508f8b03bebe7f7c1d9e6c05
CRs-Fixed: 2017426
Add command to set mapid for each VAP using:
iwpriv athX s_dscp_mapid N
Add command to change tid values in PDEV maps using:
iwpriv wifiX s_dscp_tid_map <MAP_ID> <TOS> <TID>
Change-Id: I510a40e71ecec5c453dd2dff1b13fd5ebedbe98a
CRs-Fixed: 1108452
Add per peer stats
Add support to update APSTATS
Change QDF_TRACE to DP_TRACE for improved readablility
Change-Id: I4be2adf2a1d7f978eb2961a544435d525c97923d
CRs-Fixed: 1114641
Replace void pointer handles for pdev and vdev with
abstract structure handles in cdp.
New file cdp_txrx_handle.h has the abstract
structure declarations.
Change-Id: I333e6ea5e699e7cebbfc6281faf7f07c0aee4e2a
CRs-Fixed: 1109835
Seperate the dp peer object allocation from setting the peer's
default routing and default rx tid queues.
This change is to address a race condition where the HTT peer map
message arrives before the peer object is created.
Change-Id: Ibb0671d29ffac41fd06bb8a88476f37120d99ccb
CRs-Fixed: 1089662
Added a new layer CDP_IF inside dp which is an intermediate
between the data path functions and the upper layers. All function
calls from outside the DP layer to the DP layer goes via the CDP_IF
layer
Change-Id: I76e671c85d2d02aa0a65a90b356840d3aeede52d
CRs-Fixed: 1075597
STATS log for:
a) total time for tx
b) total time for rx(inside bss)
c) total time for rx(outside bss)
On "iwpriv athX txrx_fw_stats 24" command, stats logged
On "iwpriv athX txrx_fw_stats 25" command, stats logged and reset
Change-Id: I3b7d794e155916745a2c6c045984b416d3dc91ee
CRs-Fixed: 1072258
1)In the current implementation, txrx fw stats are radio level stats.
In collard, txrx fw stats are enhaced to fetch VAP based Tx MU stats,
Tx sounding info and Tx Selfgen stats.
2) Merging new ATH params configs
Change-Id: I817ec4fe08f0a4d0e69262441378b0f6c3418f7f
Address compilation issues for WIN with new Lithium Firmware headers.
Also removed dependency on htt.h from header files, which may need to
add explicit dependency on htt.h in .c files.
Change-Id: Ia5027963837e645bc3f81a3db98c2ea06789aea8
CRs-Fixed: 1061096
This is qcacmn portion of qcacld-2.0 to qcacld-3.0 propagation
Add commonly used definitions for NAN datapath, like QDF_NDI_MODE.
CRs-Fixed: 962367
Change-Id: I1f42c8dab17b3a300db61756c29fc02d3d3bc504
Non datapath modules use these APIs when they work with datapath
module data structures.
Change-Id: Ic257c6fc621820199b1691b8e62f7f7109237b01
CRs-Fixed: 993414
