Add WMI command for tx peer filtering. This command is needed to send
the mac address to FW for which tx monitor peer filtering is needed
to be done.
Change-Id: Ia141fba81ba240b7f4ca015eb9251e3485294bb6
CRs-Fixed: 3199493
Send connected links bitmap to FW via a command:
WMI_REQUEST_STATS_EXT_CMDID in case of MLO connection.
Change-Id: I8ea88b0474769a56f5efa0cd006ba515e858accf
CRs-Fixed: 3149043
Critical update is the explicit signaling for STA to notify
any change in BSS param.
There are two categories of critical update params.
Category 1 elements: CSA, ECSA, Quiet, Quiet channel,
Max Ch Switch Time, that are directly included in
the per-STA profile of partner AP.
Category 2 elements: Except category 1 all operational IEs
HT/VHT/HE/EHT and WMM/EDCA/MUEDCA params.
Defined below vdev flags to track change in Category 1 and
Category 2 CU params per ML VDEV
WLAN_VDEV_OP_CU_CAT1: Change in category 1 param
WLAN_VDEV_OP_CU_CAT2: Change in category 2 param
Host notify to FW by updating current link CU param in
wmi_bcn_tmpl_ml_info TLV of BCN TMPL CMD.
Set the corresponding cu_vdev_map category 1 / category 2
based on change in critical update params of ML VDEV.
Change-Id: I8fe71309ab92a459524bdc5739f8b4a4a545562e
CRs-Fixed: 3199331
Add WMI parameters to support delta tsf calculation based on the
use_tqm_timer flag.
Change-Id: I6346f0b661bdede56874f4589f4dcc4d8b95c439
CRs-Fixed: 3193329
Set num_max_active_vdevs to WMI init command and
extract it from WMI ready event.
Change-Id: I6d6377c03214fcab74c675839f136301ebf27834
CRs-Fixed: 3183010
As part of MLO stats feature, add support to send ll_stats
and get_station stats request to firmware for all the MLO vdevs.
Change-Id: Ic50a6294f868f0604d4cfc0d4b657b6085da2fb4
CRs-Fixed: 3181020
Add mapping of wmi_vdev_param_set_traffic_config
to WMI_VDEV_PARAM_VDEV_TRAFFIC_CONFIG.
Change-Id: I2147cad3fb5726551de64edcfc41bee2707150a6
CRs-Fixed: 3191504
Add init sequence handling to support AFC device deployment type
Set AFC device deployment type to regulatory private obj
Change-Id: Ib041d2010552412aaaa41395915d948aa2ea2bba
CRs-Fixed: 3190288
Userspace sends the vendor command WIFI_TEST_CONFIGURATION by
setting the attribute WIFI_TEST_CONFIG_IGNORE_H2E_RSNXE when
driver needs to ignore the SAE H2E mismatch for 6 GHz connection.
This is needed for certification test support
Change-Id: I5c1838598478ab74d72d57a765452d7fd989b701
CRs-Fixed: 3072578
Add support in wmi to handle below new RTT PASN events:
WMI_RTT_PASN_PEER_DELETE_EVENTID
WMI_RTT_PASN_PEER_CREATE_REQ_EVENTID
Change-Id: Ib33c2def2d7ef66a6a2717e2a8e1756ab4318e4d
CRs-Fixed: 3150069
Add WMI changes to send TID-to-link mapping to FW as part of peer assoc
command and as part of WMI_PEER_TID_TO_LINK_MAP_CMDID.
Change-Id: Ia3a8fb10d49e1d54d6f4f418be3f684bc0147c5c
CRs-Fixed: 3183734
Use the PPDU duration given by FW to find the end time
stamp of management frames.
CRs-Fixed: 3181500
Change-Id: Ibabe82c8e2d3cd7e494e764a9a2baeded89a7300
Copy Engine(CE14) is used for diag events on qcn9224. Add changes to
configure this CE as dest ring and fix diag event handler to use
wmi_handle from first pdev similar to other WMI events.
Change-Id: I314939169f9be32cd277af68dcd3ef7a0eb06187
CRs-Fixed: 3177987
cal version is included in EXT2 svc ready message to indicate the bdf
and ftm version to host. Add API to extract this from ext2 message.
Change-Id: I83f4d6e83a3f78f993b40527aed7291c6496777c
CRs-Fixed: 3182634
pdev_id and hw_link_id is included in same uint32. Lower 16 bits are for
pdev_id and higher 16 bits are for hw_link_id. Use proper macro to get
pdev id from mac_phy_caps.
Change-Id: I91806c0fba63767efa0105df5697dd685f38b819
CRs-Fixed: 3182651
If the multi-client Low latency feature enabled in driver,
FW sends WMI_VDEV_LATENCY_LEVEL_EVENTID to report latency
level honored by FW as a response to a request
command WMI_WLM_CONFIG_CMDID.
Change-Id: I06f7bbc2365e8b71e0ae6386ef42ef4238dafd35
CRs-Fixed: 3180940
Add change to fetch and save the WMI service capability
bit of FW to support multi-client low latency feature
using service bit.
Change-Id: Ifce82c06fc913668949ed06634da1eebcea80397
CRs-Fixed: 3180932
Firmware advertises per candidate roam frame capability to
indicate:
1. Firmware sends auth/assoc frames for each candidate to
which roaming was attempted.
2. Fill the frame info TLV with authentication algo = 3
for authentication frames.
Add support for the roam per candidate frame info capability
Change-Id: I95c23031ab0fbc21fb9d8db3bd54004e4d1ac234
CRs-Fixed: 3172311
Change puncture_pattern to puncture_bitmap in peer_assoc_params.
As FW required, do the bit inversion for puncture bitmap in peer assoc,
then pass it to FW.
Change-Id: If96358aa9cc639555835ca1a1412d7893b16dbd7
CRs-Fixed: 3124854
Change puncture_pattern to puncture_bitmap in mlme_channel_param.
As FW required, Do the bit inversion of puncture bitmap for vdev
start params, then send it to FW.
Change-Id: Ia0d95c014cf2c1dabc6c18b6b329b7a372bcb8ee
CRs-Fixed: 3124841
Previously elna_bypass is of type bool, which check for
elna_bypass enabled or disabled with en_dis variable
Change en_dis to elna_mode of enum extlna_mode
to support extra mode of firmware_default
Change-Id: I99fba1e69c1b9a68024b266ec63b3d6be29f83e0
CRs-Fixed: 3169270
Replace slave for target, and replace
master for initiator which pair of slave.
Change-Id: I51ee0ce1ce0d0dc30281388a270bda1edfac2903
CRs-Fixed: 3169180
1. Since peer id is reused for reconnection in MLO case,
old entries for queue desc addr is cleared. Clear the reo
internal storage and reset it back on client connection.
2. Send Qref feature WMI cmd to FW to enable the feature.
Change-Id: I6705ce121c8c25d9a2ace039dab21312fa5ea4b1
CRs-Fixed: 3156642
WMI op extract_roam_event is also needed to extract roam event
of LFR2, so let it enabled for LFR2/3 both.
Due to struct roam_offload_roam_event is only defined for MCC,
add MCC specific macro CONN_MGR_ADV_FEATURE to protect it.
Change-Id: Ie9724ee578feb60ada30fe75ed3f155a2bbe77a9
CRs-Fixed: 3167557
Copy software image version, chip information,
pktlog json version and pdev id from the event received
from firmware.
Change-Id: I53c2fceee129fa69126ae8214fb652a744bfcbfa
CRs-Fixed: 3165004
When non-TLV targets are used, the WMI event table is not populated.
So, it shouldn't be treated as fatal and WMI event register/unregister
functions can return NOSUPPORT instead of FAILURE.
Handle this value in TWT code.
Change-Id: I5bc8e7aae2e572c84ea0333c967cff527d5cbcc3
CRs-Fixed: 3145077
TLV wmi_bcn_tmpl_ml_params was used to send the CSA/Quiet related
information to FW for the partner links. This TLV is deprecated now as FW
internally derives this information for the partner vdevs. Hence, set the
size of this TLV as 0.
Change-Id: Ibd783f5eed93872a6953dc2231b019f27a41109d
CRs-Fixed: 3157298
Add support to set 11az ext feature flags
Read the firmware capability for 11az features and
advertise the corresponding wiphy flags.
Change-Id: I85f6cc2f65a5d9892830f66a726cffc823093bca
CRs-Fixed: 3150584
Tag ITO config wmi cmd sent during RTPM suspend, or immediate
RTPM resume will come, RTPM suspend will fail.
Change-Id: I43952b013fd37f15b44252ae5f19e0e2c06d6064
CRs-Fixed: 3150683
Extract the regulatory channel priority value as part of the
wmi_regulatory_chan_priority_struct, sent by the target, through the
WMI_REG_CHAN_LIST_CC_EVENTID.
CRs-Fixed: 3143309
Change-Id: I3fe21c47fc0faa1b69525614bcf990f5ab1d5a79
