use dma_inv_range call instead of dma map and unmap
APIs during replenish and reap. This complete code is
under a compile time macro.
before change: 4160Mbps @ 96.5% (core 3)
after change: 4160Mbps @ 90.5% (core 3)
Change-Id: I61bca349a369ace06cd86f353880108cee013cb1
Add more stats to cdp_soc_stats interface structure to ship it to
userspace. Move soc, delay and jitter stats apis from dp_main.c to
dp_stats.c.
Change-Id: Idb7f8b706e8744350d7fb2e8802d9303b3f25b5c
CRs-Fixed: 3084586
The following issues are fixed with this change-
1. Sojourn stats were printing incorrect values
2. RSSI values were junk numbers
Change-Id: Ibed73cf370a309bf9db5baad37a0e8261c58463b
Customer reported their HLOS LTE-WLAN transition algo sometimes go wrong
for wrong low layer stats, Txretry delta is bigger than Txtotal delta.
Txretry unit is msdu while Txtotal unit is mpdu.
Add vdev/peer stats for mpdu number of successfully transmitted after
more than one retransmission attempt, to align mpdu tx_packets, tx_failed.
CRs-Fixed: 3099490
Change-Id: Id4b9d8fd81af4bf0c141dad481bfd2b3f6c1db2a
Add function pointer to update stats for LI and WKK
Add new fields in structure cdp rx stats
CRs-Fixed: 3071271
Change-Id: I6a1d7afbdfe47d171335d55bf66d210d785f5a03
Add function pointer and initialize with function
to update stats for WKK
Add new fields in structure cdp tx stats
CRs-Fixed: 3071271
Change-Id: Ib1fd867e414b8a61cff4f462434c51541f925f62
Following peer stats are updated in per packet Rx path:
to_stack
multicast
broadcast
In BE architecture, HW provides the support for basic vdev stats and
hence per packet stats updation of above parameters can be done only
when enhanced stats is enabled or HW vdev offload stats is disabled.
Avoiding per packet stats updation reduces CPU load and improves KPI.
Change-Id: Id7c11c025a8464951b615a7f7b006ce61db487fc
CRs-Fixed: 3067843
Whenever firmware receives the sync interrupt, it would
update the MLO offset to the scratch registers. Additionally,
firmware also sends a HTT message.
The values from the HTT message are copied into two structures:
1. into the dp_pdev structure, for monitor mode usage
2. into the scn structure for updating the pktlog header
A new WDI event is introduced for MLO timestamp sync into
pktlog header. Host sends the WDI event once it receives
htt msg and the data gets parsed in the pktlog handler and
eventually pktlog header gets updated with those values.
Whenever pktlog memory is being filled, the latest value from scn
structure is filled into the pktlog header. Upon receiving a new
HTT message, the value in the scn structure is updated and
subsequently into the pktlog records as well. All the 8 bytes
from the HTT message are required to calculate the MLO timestamp
offset. The calculation of MLO timestamp offset is to be taken
care by the PKTLOG parsing script.
Change-Id: If1d40b4a889e58b358f0feae692958bca2b8e1de
CRs-Fixed: 3074184
- A new pktlog mode called "hybrid", is added for QCN9224 only.
- Create WDI event for hybrid mode
- Add dummy APIs for monitor filter setting
- Send WMI_PKTLOG_EVENT_HYBRID_TX to FW for umac TLV subscription
Change-Id: I47f4e14bfc766f29a0ab4a8c07ab19e0d919e66b
CRs-Fixed: 3074184
Define MAX MCS to as per 11be
Define packet type as per 11be
Add new RU values
Add new BW gains
CRs-Fixed: 3068482
Change-Id: I18b2460011e2869608fe24743e4373e3e8f3fc1a
Define a new cdp interface to fetch peer delay stats.
Define a new cdp interface to fetch peer jitter stats.
These interface APIs will be used by upper layers to fetch delay and
jitter stats per peer for telemetry stats feature.
Change-Id: I96ee6a861fa2626e7e1fba3df7df9ec64ff7e946
CRs-Fixed: 3071493
Add timestamps for last TX/RX in peer stats. This stat is needed to be
passed on to upper layers on demand.
CRs-Fixed: 3059712
Change-Id: If0d8b7dc3c139e4d1b670bf98f3f574f02ea9715
In case of successful transmission If MPDU tx
is retried more than the threshold then
increment MPDU retry count by transmit_cnt / threshold
Change-Id: Idbc7e2d0579ff68e272132fe4ffe9f951c4aacf5
CRs-Fixed: 3058464
Add changes to register separate function pointer to receive EAPOL
frames instead of using regular RX path and adding export symbol
for __qdf_nbuf_data_get_eapol_subtype() to access in it multiple
modules
Change-Id: Id05b982d31a7e008536d10dd5281e88cceba96db
Firmware sends some ppdu stats required for packet capture
mode in new ppdu stats tlv HTT_PPDU_STATS_FOR_SMU_TLV.
Add code to parse it if feature is enabled via ini and
send the ppdu stats using wdi event to packet capture
component.
Change-Id: I5567007a91093dd342f37458760b3a61c040b779
CRs-Fixed: 3004476
Currently, rx packet capture events processing happens even
when feature is disabled by ini. This incurs per packet overhead
in rx path.
The fix is to move all the processing from rx path to packet capture mode
component. Send only wdi event from rx path, when feature is enabled by
ini.
Change-Id: I647256b85117cd3373950c78a5a0ae7d6710e4e2
CRs-Fixed: 2969123
Define a new cdp interface structure and API for soc stats for use
by upper layers to fetch dp soc stats.
Change-Id: I314e952546551003da2ca7f69b2e1aa23c126e66
In case of aging out wds entries, avoid sending all
the wds delete wmi commands in a huge single burst.
Instead limit the maximum commands to half of the
wmi queue size. Inactivity will continue to be
marked every 120 secs but the inactive entries
will be flushed every 5 secs if there are pending
entries.
Change-Id: I6735704a0750ef466f1df798f0b354f4382098d6
CRs-Fixed: 2952682
added new WDI event index for tx capture, share same index cause
corruption when switching different feature without delay.
Change-Id: I9e7a849968544957491891629eb42974c8b65728
Add and initialize a preallocated pool of buffers which can
be used to replenish RX buffers. During replenish, the buffers
from the pool are used instead of allocating/mapping a new buffer
in the softirq context. This preallocated pool will be refilled
in thread context.
Change-Id: Idf3bd7d25c5d57ddba105ccd8fab672c26a184f1
CRs-Fixed: 2869345
This change will set up monitor mode status and destination ring
filters for enbale CBF logging and will enable destination ring to
capture CBF frame. This change will get the CBF frame from the
destination ring and send it to the pktlog module for post processing
through WDI event. CBF is a compressed beamforming report.
Change-Id: I4cc419440ba8d60446dd1f01747340a89f023171
While preparing raw packets for transmission, the count
of nbuf belonging to one mpdu must be less than the
number of segments.This makes sure the frags array inside
seg_info does not go out of bounds.
Change-Id: I7fffba7f64da274aa73c558cfc63d90f4419a04d
Firmware advertizes its support to place FST in CMEM,
export this capability to DP.
Change-Id: I265246bcfd38a36e34c4ede66e117a92bb185032
CRs-Fixed: 2772238
Drop frame if it is not for the vap, to which
client is connected.
Enable this check only for ap.
Change-Id: I33d7eb79267490bdb8697e4e45f789e9f6279f0e
CRs-Fixed: 2756304
Add support to update the count of number of Punctured Preamble
PPDU's transmitted by the AP.
Change-Id: Id85a490e9e80566e639f48190a96d3107c6e5c61
CRs-fixed: 2755288
Rx desc pool have a flag to identify whether frag or nbuf
operation needs to be performed for alloc, map, prep and
free buffer for monitor dest buffer.
This flag will be set only for mon destination desc pool,
if RX_MON_MEM_FRAG feature is enabled.
In all other case, It will be set to Zero and default nbuf
operation will be taken.
This flag get initialized at the time of pdev rx_desc_pool
initialization and gets reset while pdev deinit.
Mon destination buffer will have support for frag if
RX_MON_MEM_FRAG flag is set.
Change-Id: I67c6c823ee4f114035b884c024a1a9054a40665b
CRs-Fixed: 2741757
Move RU and MCS strings from dp_stats.c to cdp header file so that these
strings can be used in user applications including the CDP header. This
will remove redundant definitions of these strings in user application
Change-Id: Ie74283f54131378447324b927e19e9716ef7519a
CRs-Fixed: 2749062
Add WMI support for WMI_TWT_SESSION_STATS_EVENTID. This event
contains stats for a given TWT session.
Change-Id: I01d5f7b30da803ee713a14c1d1124b8af7161bca
CRs-Fixed: 2609951
