The callback function for spectral may be not registered,
add checking before calling the function, return -ENOTSUPP
if it's NULL.
CRs-Fixed: 2751658
Change-Id: If04fb360cd4ef89f5c8ce007786d636110cb02df
Since struct spectral_samp_msg may be modified, so provide API to get
version information, then spectraltool can compatible with different
host based on version information.
Change-Id: If68dbd0d85b28f46056208d849fe2db4faea493a
CRs-Fixed: 2575818
The Spectral module uses the first vdev of a pdev for scanning.
For MCL platforms all the vdevs are associated with a single pdev
and this may cause a mismatch between the vdev intended by user and
the vdev used by driver. To avoid this MCL platforms pass a reference
to vdev on which Spectral scan is triggered. WIN platforms
can continue to use the old approach of using the first vdev of a
pdev by passing NULL for vdev to vendor command handlers.
CRS-Fixed: 2725777
Change-Id: I1a7278bdcbcc2b706aa292b33c17546190dac082
It starts spectral scan without vdev object, and uses the first vdev
as current vdev. which cause vdev mismatch in some platforms. So pass
vdev object or id when finding current vdev.
Change-Id: Iab55afbe2c98906021a008918f186d3d2dce5871
CRS-Fixed: 2716460
Add support for processing the start scan response
WMI event. FW provides the necessary information to
segregate FFT bins to pri80, 5 MHz and sec80 in
160/165 MHz. Also, cfreq2 and the channel width is
provided to FW via WMI command.
CRs-Fixed: 2672081
Change-Id: I666b6c18a63d5d01117aa9cbd611691c6f8b2793
Some targets have a single synthesizer and it allows
a single Spectral detector to scan in 160 MHz /165 MHz.
Enable Agile Spectral scanning in 160 MHz / 165 MHz for
such targets. Agile creq2 will be populated in the WMI
command after WMI interface changes are merged.
CRs-Fixed: 2648480
Change-Id: I8522cbeeab29ac41479e3041eea376b081c0758a
Populate number of Spectral detectors per BW in the
Spectral capability vendor command response.
CRs-Fixed: 2659587
Change-Id: I2eba5df02a5f70556d65e689aece1f0fbd8bba93
QCN9000 has the capability to Spectral scan in 165 MHz/
restricted 80p80 mode of operation. Host filters the FFT bins
corresponding to the additional 5 MHz and exports to the
user space via SMAP message.
CRs-Fixed: 2630960
Change-Id: I54ec36968cb0c8d5a68ff39029004b08936cb91e
Till IPQ8074/IPQ8074_V2 each Spectral detector was capable of
doing scan up to 80 MHz. But in QCN9000 each Spectral detector
is capable of doing scan up to 160 MHz. As a result there will
be only one Spectral report in 160/80p80 MHz. Modify Spectral
Rx path to support single Spectral report in 160 MHz.
Change-Id: I9639cdc6adc6ad80e2769571b06d2a2021d699bc
CRs-Fixed: 2619544
1) Enable DDMA support, FFT bin length adjustment SWARs
2) Skip 16 bytes of padding added after Spectral summary report.
3) FFT report header length is 24 instead of 16 in Pine.
4) Max FFT size is changed to 10.
CRs-Fixed: 2608215
Change-Id: If32a8995f814140f5b61041031fb842d01d24c94
Add a new member to SAMP structure describing the channel width of
Agile Spectral scan.
Change-Id: Ib27fe9ed63bf8f89c59762150fb58943e6bcf7ea
CRs-Fixed: 2582670
All gen III chipsets use Direct-DMA mechanism to copy Spectral reports to
the Host for further processing. This mechanism involves ring and buffer
management in the Host, FW, and uCode, where improper/incomplete DMA and
improper tail update issues are seen. DBR framework provides support to
debug such issues. Add Spectral control path support to facilitate the
configuration of these debug options.
CRs-Fixed: 2478596 2478595
Change-Id: I094616c4137145389b6984ccab933e5ebd0aa1ab
When loading wlan host, memory alloc takes too long when registering
spectral to direct buffer rx component and affect wmi ready event
handling. So avoid to register spectral to dbr when loading wlan.
Change-Id: If48aab2cf424c41af1427f350734690918291d69
CRs-Fixed: 2558477
1) Add Spectral scan mode and agile center frequency in WMI
commands to indicate the current mode.
2) Obtain the Agile Spectral capability from the chain mask table.
CRs-Fixed: 2455967
Change-Id: I88ba6fc1ecf9b530a6b516d0c1e4ce88702c6d1f
Add Agile Spectral frequency to Spectral SAMP message and populate the
same. This coexists with the pre-existing operational frequency in
SAMP message for the sake of flexibility.
Change-Id: Iadb8efeaac924df5b0ac9a83f630206b2ef93052
CRs-Fixed: 2545763
Some chip sets don't have the capability to run agile Spectral with
160/80p80 modes. For this add separate agile Spectral capability for
160 MHz, 80p80 and non 160 MHz modes.
CRs-Fixed: 2536823
Change-Id: Ic5b2335e3183688b7a007cf0380f0c3644e50219
Spectral generation III hardware sets the Spectral primary 80 MHz
(pri80) indication in Spectral Summary reports to inform software
whether the Spectral sample was gathered on the primary 80 MHz
segment. But this may also be set in the case of Spectral scans
intended to be carried out on the Agile frequency or secondary 80 MHz,
due to a channel switch of the Spectral chain from Agile/secondary 80
MHz to primary 80 MHz. Software can ignore samples for which the pri80
indication is set for Agile mode or for secondary 80 MHz in normal
mode.
Add and populate fields for pri80 indication, one intended for primary
80 MHz/Agile and the other for secondary 80 MHz.
CRs-Fixed: 2524733
Change-Id: If592d664cebfe1e08026e55d4031c74d9a9db2e0
Add helper API to get the center frequency of secondary 80 MHz
segment. Make this API available to Spectral target if layer
via rxops.
CRs-Fixed: 2523690
Change-Id: If1cad90d9b27d1461e802b921aecda07031b1e0b
Add an attribute which describes the error code
in the response to set config, start scan and stop
scan.
CRs-Fixed: 2500481
Change-Id: I491cd6e061d2d08ceb4d9af2a7de5223e229c280
Change Spectral report processing logic to handle
Agile Spectral reports. 160 MHz state machine is not
affected by Agile Spectral reports.
CRs-Fixed: 2458359
Change-Id: Iead6427f57edddd61f7d64a961cc6d936d54ab9e
Add a new request structure for Specteral control path.
This structure packages all the commands and their
required inputs. Response to the commands are filled
in this structure by the command handlers in lower
layers.
CRs-Fixed: 2446466
Change-Id: I3113e8721382d284b4e03e0f8fdab1e68d5cfaa1
Today Driver and applications maintain a separate copy of
spectral config definitions, which is error prone. Solution is to
expose the definitions via a header file from driver and include
them in all applications using Spectral.
CRs-Fixed: 2432011
Change-Id: I107c2db05e1cb71b379d6f15a282a889882da2f8
Today Driver and applications maintain a separate copy of SAMP
message definitions, which is error prone. Solution is to
expose the definitions via a header file from driver and include
them in all applications using Spectral.
CRs-Fixed: 2431820
Change-Id: Icf7e6d6bfa1e7bfaa1f2cb4756e69edbac6bfb33
CFR requires to configure the number of DBRs that can be packed
in a single DBR event. Currently, this is fixed value.
Make this configurable at the time of registration.
CRs-Fixed: 2415489
Change-Id: Ifcd606641f986a5345f8ccb361c3f45db07fdc37
CFR needs to correlate data received from direct dma ring and WMI event
for tx completion. These two events can come in any order. To facilitate
correlation CFR module has to hold on to the buffer until both events
are received and then replenish buffer back to direct dma ring. To
facilitate this requirement direct rx buf module is modified to change
callback return to bool to indicate whether buffer can be replenished
immediatley or not. Also add API to indiciate buffer release/replenish
later.
Change-Id: I40d3fdff82fd2828ada14b584da33a66052c6773
CRs-Fixed: 2403398
spectral register and unregister is
supported for QCA8074, QCA8074V2 and
QCA6018
Missing target check in spectral un-
register function lead to memory leak
issue
Add missing target check in spectral
unregister to resolve the leak
CRs-Fixed: 2401813
Change-Id: I04283eaacc2d51934fb08ada46bca25d43c1dfa4
Populate Spectral capability structure with scaling parameters
from extended service ready event parameters. Send the spectral caps
via cf80211 interface.
CRs-Fixed: 2379652
Change-Id: Id0372bdd40843c2101df32d2e71920027a24909f
Add Unregister API to de-register and free resources in direct buf
module. Existing logic of freeing all resources as part of pdev destroy
does not take care of soc_start and soc_stop scenarios. Add this API to
enable modules to de-register as part of soc_stop and register during
start.
CRs-Fixed: 2385313
Change-Id: Ibe6f6bc5f4bd2acc5a9fe71eee09c151853073bc
When Spectral is disabled via INI and the rxchainmask is set for
the radio via iwpriv/cfg80211tool, it results in null pointer access
of target_if_spectral pointer. To fix this, add Spectral feature check
inside target_if_spectral_set_rxchainmask.
Change-Id: Ibd43d3bbc8622d4b8502653b55511bb4667cec7a
CRs-Fixed: 2380653
Add INI support to disable spectral feature and do not process the spectral
user commands if spectral feature is disabled.
Change-Id: Id353131675454652d59fd5d5f8fd3d732a07b777
Acked-by: Shashikala Prabhu <pshashik@codeaurora.org>
CRs-Fixed: 2343947
For generation 3 spectral reports for the 80 MHz segments
come as part of different events. To deal with this a
state machine is added to report handler. Noise floor
value of the lowest chain in the chain mask is populated
in the SAMP message.
CRs-Fixed: 2236331
Change-Id: Ie24426449cf8503c9d7f7c30ca617a6697ca2b5e
Add definitions for Spectral linear bin scaling, including conversion
functions, RF parameter definitions, and hardware generation
specifiers.
CRs-Fixed: 2294176
Change-Id: I6e1eb2ce3ec19d8734facb88c6329fe0026ecce0
Add new fields such as agc_total_gain, sscan_gainchange
to the Spectral SAMP message.
CRs-Fixed: 2291499
Change-Id: Ia6a9fd742c2ee98fd9d7102f0d8c66dcd22a1614
Forward declare 'struct wmi_spectral_cmd_ops' in
file wlan_spectral_utils_api.h to avoid
compilation issue when spectral feature flag
is disabled.
Change-Id: Iba8dfbb2007f20d409fbb2d67ee29f702264e50d
CRs-Fixed: 2269005
Sync the Spectral header files used by driver and Spectral related
applications.
CRs-Fixed: 2258823
Change-Id: I9a4fb89e9327fffb7478619e63788a1d284f49b5
Address the following issue in wlan_spectral_utils_api.h:
CHECK: 'frequncy' may be misspelled - perhaps 'frequency'?
Change-Id: Ie9675796d12feded20d968d09c439f2e6ac5c9f0
CRs-Fixed: 2241582
Spectral scan period is not in terms of tclk periods for
generation 3 Spectral HW. It is directly in micro seconds.
Default value is 224 us. Driver needs to use 224 us as
default value. Application needs to display the unit as
tclk period till generation II and micro second for
generation III. For this driver will be sharing the
Spectral HW generation info to application as part of
the capability exchange.
CRs-Fixed: 2225740
Change-Id: Iaeda8ebb77c2a39824b5f919e8578ff4d56c1aa5
Define os_if_spectral_netlink_deinit to close the Spectral socket and
de-register the os_if callbacks
Change-Id: I3d054c2a2d630d4d959861d3620592010d04c09a
CRs-Fixed: 2186113
