Update config file and make rules for msmsteppe
compilation.
Change-Id: I374a0725a7dd36edc9e04652fb07dc719310565c
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
When ssr is in progress, during some race conditions
mbhc events are getting reported when codec is still
coming up. Ignore such events without reporting.
Change-Id: I3d3f78f97c2b855fc36a480f38c166bda2d979f0
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
In the case of WDSP boot timeout, api_mutex and ssr_mutex have already
been acquired. There is no need to do mutex lock again during debug dump.
Check the signal enum to see if it's the internal WDSP boot timeout case.
Change-Id: I6fe5e77b1bff72ed5ad463bb1df76c6b02c84c92
Signed-off-by: Xiaojun Sang <xsang@codeaurora.org>
Cancel any pending delayed work in device down call
to ensure no work is scheduled during or after a
SSR/PDR sequence.
Change-Id: I4cc89cb1a9d8be732c978044d4eea3cf6644ec30
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
Use hardware default value for boost state in regmap.
Use correct mask for initial value of boost state.
Change-Id: Ia8b707ba0128662d47059d25325693bc8eaff723
Signed-off-by: Xiaojun Sang <xsang@codeaurora.org>
Reset power_active_ref counter to 0 when it is negative to
take digital core out of reset during next session.
Change-Id: I724ffe6e3547655424238ca02a9bf8ac24b101fe
Signed-off-by: Meng Wang <mengw@codeaurora.org>
If wcd934x config is removed, need to stub out the
APIs to load any dependent audio modules and enumerate
sound card.
Change-Id: If885d4d1f0ee83448ac41ed66b51f078978cb7d1
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
Use CONFIG_ARCH_SM6150 for Talos to enable
proper compilation.
Change-Id: I14e06122116c431bf4b99da3a061d165f68e0d4f
Signed-off-by: Tanya Dixit <tdixit@codeaurora.org>
Add MSMSTEPPE in the makefile rules to enable
compilation for SDM640.
Change-Id: I36437404d98229c8b292fd63304498122d8c8687
Signed-off-by: Tanya Dixit <tdixit@codeaurora.org>
Update all audio drivers to use updated chipset name in
files, functions, architecture specific configurations
and the device tree compatible strings.
Change-Id: I507948866213ddb8806edea71a57c1f29ce7e71b
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Update all audio drivers to use updated chipset name
in architecture specific configurations and the device
tree compatible strings.
Change-Id: Ib1abe643c6914c1b0b57ef110c7b60e23e356d97
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
WSA8815 requires default boost state of MAX_STATE_2, when
speaker protection feature is disabled. Set boost state to
MAX_STATE_2 in all cases for WSA8815.
Change-Id: Ic700d9a206e94a4cdd1d99f8547bed9df1e759e8
Signed-off-by: Xiaojun Sang <xsang@codeaurora.org>
Null check is needed before accessing swr control data
to ensure proper error handling in case speaker path
is issued when swr is not enabled.
Change-Id: I5037a912652189b3ae58f1119d0534777a9c264a
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Update register default values before post SSR to avoid codec nack issue.
Change-Id: Ibf1e3275d27c4b65ab179b9ddc5a51621c89eab7
Signed-off-by: Meng Wang <mwang@codeaurora.org>
In Tavil driver, both ANC0 and ANC1 channel registers are written when
each ANC channel is enabled. This logic results in high latency during
ANC enablement on Tavil codec. Optimize this logic by only writing the
corresponding channel registers when enabling ANC0 or ANC1.
Change-Id: I62e8572967e6ca6c851cbaaad5f1b8c19e5b1a5f
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
During Tx path enablement, amic information is needed for proper
power level settings and for better performance. Existing API returns
incorrect amic information. Changes provide the correct amic information.
Change-Id: I18f3f35212cae47e5d944c2e075f03889147722b
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Add support for WCD934x codec on msmnile target for audio
playback and capture usecases.
Change-Id: Ia91fd532fcb3a127941f8dc7ba42aecea17a5ec2
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Observe mute issue when PDR triggered while music playback
on HPH. As per HW recommendation, ensure OCP is turned off
before PA enable/disable. During PA enablement, turn off OCP
to avoid false OCP interrupts.
CRs-Fixed: 2167007
Change-Id: I0dc2cc6ded3416b635d14dc3b7aafa7997fe9a4d
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Currently IIR coefficient values are written to HW everytime when
digital core comes out of power collapse. This increases playback
cold start latency. So update IIR coefficient values before IIR
band enable.
Change-Id: I57ad54b4674ed0a49fdfc55d77c519568f5a7893
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
Change i2s max rate supported for tavil to 384000Hz.
Cleanup usage of intf_type to optimize differentiation
between slim and i2s.
Change-Id: If6451dae7c61e8f61be3d5a13549f98b382e5054
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Add support for tavil i2c access. Add audio
routings dapm widgets for data and control.
Change-Id: I96ebf7a5700b10f294f4fadfeeb21dab490a9313
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Limit size of val to WCD_MISCDEV_CMD_MAX_LEN to avoid stack overflow.
CRs-Fixed: 2177167
Change-Id: I5d2b91e92305d6a485b2e8f959036504f0f55b13
Signed-off-by: Vaishnavi Kommaraju <vkommara@codeaurora.org>
With AANC enabled, and when the device switches
from speaker path to handset path there is a audible
pop. Add more delay to the aanc enable work function
to resolve the pop issue.
CRs-Fixed: 2137607
Change-Id: Icaf381179b0a81440b21ab4280cb6fc95e6fe6ba
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Add interface to trigger WDSP dumps for debug use.
Important register dump and WDSP ramdump are both collected when
DEBUG_DUMP string is sent from userspace via WDSP misc node or
when WDSP boot timeout happens.
CRs-Fixed: 2117755
Change-Id: I8b91a8939201a54512a5e3557ce771b4ff2ff075
Signed-off-by: Walter Yang <yandongy@codeaurora.org>
In SSR init call stop mbhc before initializing mbhc
again, so that usbc analog deregisters the callback
with PMI notifier.
CRs-fixed: 2128532
Change-Id: I329f25172b5cc2d80b93918787f703d89c95062f
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Based on where the code is synced the driver should allow
both static and dynamic linked compilation.
Also remove __exit for modules loaded from another common
init/exit functions.
Change-Id: Ib58f152002aba3af4446f9bbd9b82c279212bd0a
Signed-off-by: Asish Bhattacharya <asishb@codeaurora.org>
Add support for analog mic TX hybrid mode to allow
audio catpure in high performance at the same time
achieving lower power.
CRs-Fixed: 2136385
Change-Id: I08b90a26d6b6e4761ff17dec84bf58f8d437d908
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Set bus_down_in_recovery flag as soon as possible when
BUS down notification reaches codec driver. This is to
avoid any unwanted slimbus transaction while BUS is still
not recovered.
Change-Id: I77917975372bf51e6aa881cbfc63c479478db375
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
Reset ASRC after audio playback is completed to clear
the FIFO and avoid any noise being generated.
CRs-Fixed: 2129994
Change-Id: Ie45796e1bd68d5a8bd790490a65520358f26b811
Signed-off-by: Walter Yang <yandongy@codeaurora.org>
Update make files to extend dlkm support for qcs605
Change-Id: Icf736fb66ca12966f4c6cd72bb906eb32899868a
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add new mixer ctls to control max boost state level
for speaker protection V3.
Change-Id: If967de46955f6dc8692986503daea68ce105f642
Signed-off-by: Xiaojun Sang <xsang@codeaurora.org>
Switch to DLKM for all audio kernel modules.
Change-Id: I6a96023a21f655f873531af9ace81f2b01eb0f58
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
