Prepare and Send WMI command to fw to set the rf path. Also, add module
ID for rf path switch for qdf log prints.
CRs-Fixed: 3568221
Change-Id: I7ef0ffe66eaed837424699641d3e5b8537cd0304
Once the FW sends the link switch request to host handle
the request from scheduler thread and send confirmation
back on completion of link switch process with status of
link switch (success/failure).
Add new serialization command type for link switch.
Introduce flags to get the current state of link switch
request, set the state to idle when no link switch in
progress or once the current link switch is completed.
Access to state is protected with MLO dev context lock.
Implement various helper API to:
a) Transition link switch to next state.
b) Get current state of link switch.
c) To check whether any link switch is in progress.
c) To check whether link switch is happening
on assoc VDEV or not.
Introduce a new VDEV flag to suggest the VDEV is in
link switch process and also implement helper APIs to
set/get/clear this VDEV flag.
a) The flag is set at start of link switch, once
the FW request params are validated and before
proceeding for link switch disconnect on VDEV.
b) Clear the flag once the Link switch confirmation
is sent to FW.
Validate the link switch request params:
a) IEEE link ID's received.
b) Check if new connection is part of MLO connection.
c) Check if VDEV is MLO STA VDEV or not.
d) Is VDEV in connected state or not, that means
VDEV is not in transitioning state due to disconnect.
e) Check if any link switch in progress on this MLD
f) Current link ID of VDEV equals the FW params.
If validation is successful, serialize the link switch
command and in the serialization activation start the
actual link switch process.
Change-Id: Ie582650541054c8cf39aaa8316e86a7a40256a15
CRs-Fixed: 3556422
Extract aux device capability from service ready ext2
event, and report such info to wma/mlme/hdd.
Change-Id: I888624fd3443118ba66fadd7a40fcce4f4b5d521
CRs-Fixed: 3549753
Introduce new vdev parameter WMI_VDEV_PARAM_DISABLE_2G_TWT
in order facilitate FW to change twt operation state for
2.4 GHz link
Change-Id: I35436245c5e0ee113a8fdc2edba42a7978b2683d
CRs-Fixed: 3560314
Driver sends feature set information to fw as
part of wmi init command.
Fill sta dump feature info in feature set bitmap
and send it to fw.
Change-Id: If28cd8f10af2333f0f231f0c4ae659ab20c1358a
CRs-Fixed: 3552909
Add support in driver to check whether F.W supports
dynamic MSDU aggregation size programming to H.W.
Change-Id: Ifb2d41efb23934414cce38753df82e1d15f01e11
CRs-Fixed: 3540531
Add INI to disable AST indication. AST disable flag will be
sent to the target in resource config.
Change-Id: If30cac010681faf06bbcaa2d492d6843e3e675d0
CRs-Fixed: 3544223
Extract WMI Service bit for ATF 512 Max client support advertised by
Firmware as part of wmi service ready.
Add rxops functions as for upper modules to get it.
Change-Id: I51e8dcaad96bdd29eb6fd4c37b0917127696ede6
CRs-Fixed: 3551661
Add nstrinfo in ml_partner_info and parse sta info.
Add nstr_info in ml_peer_ctx and peer_assoc_params
and send to FW
CRs-Fixed: 3483776
Change-Id: I255fc671b84a2048c6057a61a6de8d81db36c681
Add wmi pdev param support for long range phy param like cts timeout
slot time etc as part of enabling user config.
Change-Id: If1f3d86e09e634cde43ef8211831511781e96672
CRs-Fixed: 3520970
Add support in driver to check if FW supports per link stats
in case of mlo connection, using the wmi service event
WMI_SERVICE_PER_LINK_STATS_SUPPORT
Change-Id: I85ea50877455efc3646d3b1892ce855dc07b1dbf
CRs-Fixed: 3520338
Add 'max_simultaneous_links' in peer_assoc_params
and send it to FW via peer_assoc_add_mld_params.
Change-Id: Ie4c3492cf03ef43e1bb02122019cda3679fb5f3a
CRs-Fixed: 3476565
Add structure peer_vlan_config_param for
WMI_PEER_CONFIG_VLAN_CMDID to support vlan peer config
Change-Id: I2f93ce2bd10d1920d33ee0e26d1b7d344813852b
CRs-Fixed: 3492156
Add APIs to init the TSF sync capability based on
WMI_SERVICE_MLO_TSF_SYNC service bit sent from FW,
per ML group.
Change-Id: I5dad3fef7ebfa2af330b95d45cac3bef862f46f0
CRs-Fixed: 3491364
In case of MLO connection, firmware sends each vdev's
status information using extended vdev stats event.
Add support in driver to extract it.
Change-Id: I95f2a96cb7034b5b070cc6f37a97591e01e5893a
CRs-Fixed: 3483730
Adding support for reset PN value using
WMI_HOST_PEER_FT_ROAMING_PEER_UPDATE peer command.
Change-Id: Ib486d09c80878d41efa299756e655d66babd825d
CRs-Fixed: 3490034
Set flags in WMI peer assoc to inform FW if node is
1. QCN Supported
2. Operating in Multi-AP mode
If node is 3rd party and operating in Multi-AP mode,
FW and uCode will change crypto register for each Rx/Tx from/to such nodes
Change-Id: If4cf9ec39fa11a90733df45fffa473a672643f8e
CRs-Fixed: 3488865
Add code changes to handle new wmi_mlo_link_disable_event
Extract the wmi event params and store in host defined
structure.
Change-Id: I6893bfa4da7b27f4a9b1ce2936057bb3576a317c
CRs-Fixed: 3458680
1. Read the new service capability:
WMI_SERVICE_CCA_BUSY_INFO_FOREACH_20 MHz: Via this host knows
whether FW supports reporting of CCA busy info for each 20 MHz
subband of wideband scan channel or not.
WMI_SERVICE_VDEV_PARAM_CHWIDTH_WITH_NOTIFY_SUPPORT: Via this
host knows whether FW supports VDEV param channel width switch
with OMN/OMI notification or not
2. Register osif callback to send scan done indication to upper
layer
3. Add 2 new scan flags pause_home_channel and
report_cca_busy_for_each_20 MHz
Change-Id: I63d561a3c5f8e49a3ca42d956e6b630c63edeaf4
CRs-Fixed: 3460901
Get the bit value from ini config and populate the resource_cfg,
flags2 bit related to rf_switch which will be later passed via
WMI INIT command to FW.
Change-Id: Ic642dda55850a49944bcf43838c7c5c79bed3587
CRs-Fixed: 3475088
Add APIs to init the TSF sync capability based on
WMI_SERVICE_MLO_TSF_SYNC service bit sent from FW,
per ML group.
Change-Id: Ie8ca48f8f6065f02eefaea85ad967e32d09787fc
CRs-Fixed: 3470139
After receiving WMI service ready ext2 event and htt msdu index to
qtype map is derived, call CDP API to evaluate whether TX ILP can be
supported or not, update the TX ILP capability to DP, also send WMI
INIT CMD to FW to notify if host has enabled the TX ILP support or
not.
Change-Id: I472ebc5c7fa4b2996b790b58274fa3c048f6d7f9
CRs-Fixed: 3447519
New TLVs for MLO link state information is introduced for
get link info command. Add WMI changes to add these TLV in
get link info command
Change-Id: Ib8d12a727ac6f59257dcce69174271330a065c77
CRs-Fixed: 3431076
This change is to populate wmi service for 11az TBR rsta.
Also, this adds host based enum id for corresponding wmi service.
Change-Id: I9687855651bff222616adb3a8cf346e6264688ee
CRs-Fixed: 3437035
Since special vendor roam log is not need for common roam,
add flag to filter the log.
Change-Id: Ide67de16ae68c507a7b4e81672cbf5e0fc0e4c5d
CRs-Fixed: 3442621
Add support for WMI_CSA_IE_RECEIVED_EVENTID as:
1. Register the handler
2. Handler to extract the event
Change-Id: I9f476c7fbc51d9686d05fbdb5f46dec3bcd3c29e
CRs-Fixed: 3431363
Read the new service capability:
WMI_SERVICE_TDLS_CONCURRENCY_SUPPORT for TDLS concurrencies
support. With this service capability below concurrencies are
supported:
STA+TDLS+P2P
STA+TDLS+P2P+P2P
STA+TDLS+P2P+SAP
Host driver will check this capability to disable TDLS
off channel when concurrent interface comes up. If this
service cap is not advertised by the firmware then
existing TDLS connection will be teared down when concurrent
interface is started.
Change-Id: I744775080a22ca8f3bc88894c349916eea27fd3a
CRs-Fixed: 3414266
