This change adds MLO support to Peer.
It implements,
1) MLO peer list management
2) AID allocation
3) MLO Peer creation/deletion
4) Notifying partner links on peer creation/deletion/assoc
Change-Id: Ie1b675dccdf0de1d79f6f32d9255cf3cca53fdf2
CRs-Fixed: 2967057
Add storage for EHT mac and phy capabilities as
per 11be D1.0 and update the EHT mac and phy capability
sizes.
Change-Id: I67224b35b701235374772e9975375e695f3ed959
CRs-Fixed: 3000166
Add a new component for MBSS framework in object manager.
Add a new trace module for the new MBSS component framework.
Change-Id: I7ef3559d90a6bc7f558e3994a1a91f09985d90e9
CRs-Fixed: 2958764
Add component id for Repeater feature.
Move the feature specific flgas to Repeater component.
Change-Id: I1615ce0023a0b0f7a3fffa206d6fa5f320a18ed3
CRs-Fixed: 2936326
Build regulatory channel list for 802.11BE wireless mode and for the
new channel width 240/320 MHZ. Following is the summary of the changes:
1. Add a new channel width CH_WIDTH_320MHZ.
2. Enumerate a list of 320 bonded channel frequencies.
3. Increase the maximum supported bandwidth to 320/240 in the channel map
4. Introduce reg_channel_list structure which holds an array of
channel params and also a bitmap to indicate the regulatory
puncturing pattern.
4. Build 320 and 240MHZ (punctured 320) regulatory channel list.
CRs-Fixed: 2901260
Change-Id: Ide6a070e0121fbdabf77820a552ca743ca38732a
Add gpio configuration vendor interface to set target
gpio configuration and output info, meanwhile add
GPIO component id
Change-Id: I0b551cd63b61675406fe37549f2efeca1a2999bf
For FILS pmksa cache, the pmksa add/del/query is based on SSID
and cache id. The current crypto pmksa cache API dosn't support
SSID and cache ID.
1. Add SSID/Cache ID support to pmksa API
2. Add RSN IE pmkid field based on SSID/cache ID
Change-Id: I1577c6293b75d6f8e6210f314dd83462e06d8190
CRs-Fixed: 2621860
Add initial set of coex files, implement the basic functions.
Coex component is used to process coex related configurations.
CRs-Fixed: 2565088
Change-Id: I8b9600809691b808f97c621cb329a6ab9941814c
Few phymode are missing from enum wlan_phymode and many are not
valid phymode, e.g for 5ghz 40minus and 40plus are not valid.
So add the missing enums and remove invalid enums from enum
wlan_phymode.
Change-Id: Id6a1fb4cf0d629cc410bd262a048b5050d05ed5d
CRs-fixed: 2505422
Do not configure legacy rate to FW if it is HE connection, otherwise
FW does not work.
Change-Id: I391e328ac71761722642f884e2be2b3eb15d2a1d
CRs-Fixed: 2475625
Add interface API to send reject ap list to FW,
also add the blacklist manager UMAC, and QDF component
for the same.
Change-Id: I826e537683441762043003d71dc2b79ceebebbcb
CRs-Fixed: 2460770
Implement the interface to transfer the info between
host driver and firmware about the ap which has interop
issues with the DUT. It is detected by firmware and
forwarded to user sapce for persistent storage. User
space configs these APs to firmware when the DUT
starts up next time.
CRs-Fixed: 2425197
Change-Id: I3857d2a605baa2673af333a7a0412f1690b59769
Currently 1024+ is the number of peers, increase it to be 1536+,
(512*3) as the three radio soc supports 512 clients per radio.
Change-Id: I5f1d69206c536bb706825fbd70736dce21b64161
CRs-Fixed: 2436434
Previously host driver only supports initial SAE and Suite-B
authentication types and roaming to SAE AP is blocked. The
802.11 specification has introduced the Akm suite 00:0F:AC:9 for
FT-SAE and 00:0F:AC:13 for FT Suite-B akm type. Add support for
FT-SAE and FT-Suite-B.
Extend the enum wlan_auth_type to include WLAN_AUTH_TYPE_FT_SAE,
WLAN_AUTH_TYPE_FT_SUITEB_EAP_SHA384. This enum wlan_auth_type is
the new implementation for akm type in converged scan module
corresponding to the legacy eCsrAuthType enum.
Add changes in scan module filter to support FT-SAE and
FT-Suite-B authentication suites be added to filter->auth_type.
csr_scan_get_result() will translate the legacy eCsrAuthType
to wlan_auth_type and push it to the filter->auth_type.
Change-Id: I74d7b0be74d33ced5d3e528032aec6e057a75ff3
CRs-Fixed: 2400683
The following are currently hardcoded. Instead, use appropriate build
configuration values if available:
* WLAN_UMAC_MAX_PDEVS
* WLAN_UMAC_PSOC_MAX_VDEVS
* WLAN_UMAC_PDEV_MAX_VDEVS
Change-Id: I78986ea2461ab99543aa617f3c5bf12e9aeb890a
CRs-Fixed: 2393639
This change defines VDEV MLME object, and registers with object manager to
be notified on creation/destroy, and also initializes MLME SM
Change-Id: I75bb7de7326e4bbed21ef9653427c4e0694c3ffc
CRs-Fixed: 2307722
Make the HECAP and HEOP changes for 11ax Draft3.0.
Draft2.0 support can still be enabled by unsetting
SUPPORT_11AX_D3 in config.unified.wlan.profile.
Change-Id: I0c0fd885a43b672baca61011b75a51526481b1ee
CRs-fixed: 2294235
Add WMI support to send action OUI extensions to firmware.
For STA interface, this feature is intended to control mode of connection,
connected AP's in-activity time, Tx rate etc.,
Change-Id: I6a0bc9d3f7f0d57805b872cae4baa1fe84fb8193
CRs-Fixed: 2254509
Add numeric values to UMAC component id for better code
readability and easier offline debugging.
Change-Id: I10d438e68588a756eff05abc7933e78c3e7dd128
CRs-Fixed: 2252908
The wlan_max_peer count in the object manager currently
includes the count of temporary peers and actual peers
created on the target, and this could be used to limit the
actual numbers of peers created.
The result is that, for a given number of
peers configured the object manager limits
counting temporary peer also and not actual peers alone.
Indicate the count of actual peers and temporary peers
separately, to appropriately limit actual peers created.
Change-Id: Ia1593d702949853ad26756f167988ec70279eb87
CRs-Fixed: 2228250
bss peer are used for each vdev. Include this count also in the num_peer
count sent to FW.
Change-Id: I71c4858ebe416a644f9e100a8d28ac1fd7989757
CRs-Fixed: 2233009
Add support for new component cp stats module id,
component id, obj mgr ref id and default log level
CRs-Fixed: 2192386
Change-Id: Ibb523f3756ad5cc80d5691ab421bcaaa0c7e2e4a
As part of IPA componentization remove IPA from HDD module
and make it as an independent component. Add qdf module ID
and Objmgr ID for IPA module.
Change-Id: Id99089f8188e8b1dbf7e1f60d3a127bec770706d
CRs-Fixed: 2180176
In testbed sta mode the RSNE enc type and auth type may not match the
AP's enc type and auth type and thus the scan filter is unable to match
and find the AP.
Introduce auth and enc type as "ANY" in scan filter. With the auth
and enc type set as ANY, all the AP's matching the BSSID and SSID
will be filtered and the negotiated auth and enc type will be
dependent on AP's auth and enc type.
Change-Id: I82f07f68d9ec6c6f2104122a05d06a698c61a50a
CRs-Fixed: 2197222
At some point WLAN_MACADDR_LEN was added to the driver, despite
QDF_MAC_ADDR_SIZE already serving the same purpose. There are cases
where these two macros are implicitly assumed to be the same value.
This is a classic single-source-of-truth violation, and only serves to
confuse developers. Deprecate WLAN_MACADDR_LEN and use
QDF_MAC_ADDR_SIZE instead.
Change-Id: I4e941d5e17d161a5810e693c89b95ae08f83c6b0
CRs-Fixed: 2179728
Save BSS and desired channel information per vdev to access
it across all the modules.
Change-Id: I7729e0ae902643d0a2c61184b9ddc2babd07179e
CRs-Fixed: 2166359
Add new WMI EVENT, SW FILS Discovery Alert Event, to get
firmware trigger to transmit FILS Discovery Frames.
Add WMI command to send FD frame buffer to firwmare.
Add WMI command to set FD period interval in mili seconds.
Change-Id: I8cb6279ec4431b9236bd32c548228a0dc6598664
CRs-Fixed: 2118098
