CFR config is passed on to FW through WMI
CFR feature code is moved into feature specific WMI file.
Change-Id: I00b57ea2ef4ec5520eb565910ac2c0a6478170e3
CRs-Fixed: 2582846
Add WMI unified APIs to extract PNO related WMI events in order to
remove wmi.h inclusion in target_if_scan.c.
Change-Id: I7fd28f175de002b48c294783f69b819ce2f3e37a
CRs-fixed: 2519032
After every roam happens or when neighbor report is sent by the
firmware, it sends the WMI_ROAM_STATS_EVENTID to host.
Add support to handle WMI_ROAM_STATS_EVENTID event from target
after every roam.
Change-Id: I4474135ac64ebfb17109d503fbd1c3d637457a73
CRs-Fixed: 2576258
To enhance visibility of 6GHz AP, 6G only AP shall send
Fils Discovery frame periodically in one beacon interval.
Change-Id: I51487380fca10418d2260dc2612e2adcf6cbb93b
CRs-Fixed: 2562434
Add new stats_id WMI_REQUEST_MIB_STATS &
WMI_REQUEST_MIB_EXTD_STATS in WMI_REQUEST_STATS_CMDID
to retrieve MIB statistics from fw.
Change-Id: I17bccc2673d1a2ce035db04d8426bab49db80790
CRs-Fixed: 2548165
Currently the driver doesnot support the sending and receiving of the
ani level from the firmware.
Add WMI and driver framework support to fetch the ani level.
Change-Id: Ib8271a2b7f62bafb22429113fbfb405cc81379ed
CRs-Fixed: 2554677
Enable DISA WMI commands for FIPS CCM test
by moving DISA WMI code to unified tlv files.
Change-Id: I90e82fef0e7e365faa6e15d555bf4d431214e14a
CRs-Fixed: 2516897
Currently the host gets service_ready_event and service_ready_ext_event
during the init sequence as a part of handshake with firmware. As the
size of the service_ready_ext_event exceeds on adding further
parameters, new event is created.
Add support for WMI_SERVICE_READY_EXT2_EVENT to be processed after
WMI_SERVICE_READY_EXT_EVENT based on the service bit
WMI_SERVICE_EXT2_MSG.
Also add support to extract the reg db/bdf version information that
comes inside the ext2 event.
Change-Id: If0b57af362e7eb653f9189b912ec1dd3efb0f731
CRs-Fixed: 2501132
This feature enables user to change HW mode dynamically
from DBS to DBS_SBS mode and vice-versa. Currently, HW
mode configuration is only possible through INI setting
requiring a subsequent reboot.
Relevant WMI changes are:
1. Relocate API wmi_unified_soc_set_hw_mode_cmd from
wmi_unified_sta_api.c to wmi_unified_api.c
2. Define API wmi_unified_extract_hw_mode_resp to extract
FW response
3. Parse and store new dev-cap fields wireless_modes,
low_2ghz_chan_freq, high_2ghz_chan_freq, low_5ghz_chan_freq,
and high_5ghz_chan_freq.
Change-Id: I49f975e7c5abc8503b651a3ebd4d56b23af915db
CRs-fixed: 2490212
This change is required by MCL for VDEV conversion. This change
adds target_if all common code.
Change-Id: If43cbbe12c9b4a2bc7fc46ff01f24a2fb6fda09e
CRs-Fixed: 2460791
Add support to read the RF characterization WMI event
and parse each individual TLV containing the channel's
center frequency, bandwidth and RF characterization
metric.
Also, remove the support for reading the RF
characterization metrics from the extended
service ready WMI event.
Change-Id: I560583f9304005282c09a27f47c8d5c2778b1645
CRs-Fixed: 2487415
This command is used to send OEM data binary blobs
from application/service to firmware.
Change-Id: Id806638bf8c53c65b32177969d965290da5701b9
CRs-Fixed: 2477337
Add WMI support for vdev delete all
peer request which will replace individual peer
delete of peers under a vdev during vdev down.
Change-Id: Ia41ae5fbf96a75d2a3e608564742d2a43e0ed2cc
CRs-Fixed: 2456858
Add changes to remove usage of void pointer for wmi_handle
Instead use an opaque pointer(set 2)
Change-Id: I06a89adaf15c6b398dbc901518aa83927b7ca16a
CRs-Fixed: 2479298
Add changes to remove usage of void pointer for wmi_handle
Instead use an opaque pointer(wmi_handle_t)
Change-Id: I7c6dce564f34352c75e0b9d0c90591de625f1959
CRs-Fixed: 2479299
Featurize PKTLOG cmd handle under feature flag FEATURE_PKTLOG
as part of CONFIG_MCL cleanup.
Change-Id: Iae8c7e7caad001d7d37a8e17c1eb892f96009066
CRs-Fixed: 2467198
Channel RF info contains metrics that signify the throughput
availability of all the supported channels. This information
is sent in as discrete TLVs (per channel) as part of the WMI
extended service ready event.
Each TLV contains the frequency, bandwidth represented and
the actual channel metric.
Add support to read the above-mentioned TLVs from the extended
service ready event
Change-Id: If947e179c1ca41466997cc48840a8d36b6236780
CRs-Fixed: 2441921
Send idle roam trigger monitor command to firmware based on
the SET SUSPEND mode command received from the user space.
The set suspend mode value sent will be used by firmware as
one of the parameters in determining if the device is in
idle state. When set suspend mode is 1, device is not in
idle state else the device is considered idle if idle state
data packet count, idle rssi, inactivity time criteria are met.
Add changes to send the idle trigger monitor value over the
wmi command WMI_IDLE_TRIGGER_MONITOR_CMDID.
Change-Id: I34632814a1e653fa87cfbab90c72ee1622dfd63c
CRs-Fixed: 2436222
Add support to get the various Coex data from the debugfs.
This commit adds the support to get the various coex data:
* COEX STATE
* COEX DPWB STATE
* COEX TDM STATE
* COEX IDRX STATE
* COEX ANTENNA SHARING STATE
The specific state information can be read via the debugfs.
Example to read the COEX STATE logging:
sm6150:/ # echo "1" > /d/wlan/mws_coex_status_info
sm6150:/ # cat /d/wlan/mws_coex_status_info
Reading for command MWS_COEX_STATE.
vdev_id = 0
coex_scheme_bitmap = 0
active_conflict_count = 0
potential_conflict_count = 0
chavd_group0_bitmap = 0
chavd_group1_bitmap = 0
chavd_group2_bitmap = 0
chavd_group3_bitmap = 0
Change-Id: I92272ad7edf44df22730ac0fa992d876840ba632
CRs-Fixed: 2413955
Add the necessary support for peer_extd2 stats in the WMI layer. The
stats contain rx_bytes, rx_err and rx_mpdus
Change-Id: I9f787e28a8e128471489c8f47ac03fef77dae930
CRs-Fixed: 2395636
There are multiple issues with the Link Layer Stats Unified API:
- struct ll_stats_clear_params and struct ll_stats_get_params both
incorrectly use the identifier "sta_id" to refer to a vdev_id.
- struct ll_stats_set_params has an unused "sta_id" field.
- Functions wmi_unified_process_ll_stats_clear_cmd() and
wmi_unified_process_ll_stats_get_cmd() pass the MAC address as a
separate parameter rather than adhering to the commonly used
unified signature: func(handle, param).
- Not all of the functions and data structures are correctly protected
by the WLAN_FEATURE_LINK_LAYER_STATS feature flag.
Refine the Link Layer Stats Unified API to address these issues.
This is co-dependent with Ifd7c8de2358121dae4752525ff57021a32be85d3
("qcacld-3.0: Use the refined Link Layer Stats Unified API").
Change-Id: Ifdc1fada55a559f3b3d0837ec20cceb653c45c40
CRs-Fixed: 2409293
In son_ol_send_null(), check for the return value of
GET_WMI_HDL_FROM_PSOC() before using it.
Also, pass argument of type wmi_unified_t in calls
to wmi_unified_stats_request_send().
Change-Id: Idfedae2fcbde6d18b1829adefcabac0adbc55859
CRs-Fixed: 2371368
Extended service ready event has a tlv
containing the spectral bin scaling parameters.
Populate the spectral capabilities using this info.
CRs-Fixed: 2379652
Change-Id: I0b4648302e7170b5965cf1aec68638e70cd36e73
The original implementation of the "get link status" feature contains
some design and implementation details that are not ideal, so fix the
following deficiencies:
- The link_status_params struct contains three fields that are unused.
- The only link_status_params field that is used, session_id, uses
legacy terminology instead of converged terminology
- The wmi_unified_link_status_req_cmd() implementation uses a void
pointer instead of the correct underlying type for the WMI handle.
Note that change I508ec083298caa45d4cbb1ba28b21e47e379a804
("qcacld-3.0: Align with revised "get link status" Unified WMI") is
interdependent with this change.
Change-Id: I057ca0aff4a627c7fcdb9f90a5da46473813f60a
CRs-Fixed: 2381364
Change Ie6c4a9847f2daa9ba2aebd17f386d584201b86d6 ("qcacld-3.0: Remove
obsolete set/reset ssid hotlist") in the qcacld-3.0 project removed
the only client of the WMI SSID hotlist infrastructure. Since this
infrastructure is obsolete, remove it.
Change-Id: I4a1de39c982947bbf4958d976426f95e3217f1a3
CRs-Fixed: 2381277
wmi_unified_bcn_buf_ll_cmd in wmi_unified.h had compilation flag
CONFIG_MCL. To get rid of the compilation flag, a separate header
file is created
Change-Id: I0bbcdf749f461f6880aacc1e3ef4e8e8fdc08ff6
CRs-Fixed: 2366773
This FR is to enhance existing pktlog debug tool
This feature will allow to capture pktlog for particular
peer mac address.
Change-Id: I3676095536185f25b0d498e03f70246260a324fd
