Currently cfg.ini supports a "gEnableCloseLoop" configuration item,
and this is used to override the WNI_CFG_ENABLE_CLOSE_LOOP entry in
the MAC CFG database. However this MAC CFG database entry is no
longer in use, so remove the obsolete support for this configuration
item.
Change-Id: Ic8b7f4f522e910476273dd428bbb471a19cbe79f
CRs-Fixed: 1060579
Send vendor specific TPC report IE as part of scan request IE to firmware.
This IE will then be included in probe request sent by firmware for scan.
Change-Id: I16e067de3980faa773d5027306795ca8e2a3c247
CRs-Fixed: 1062155
As part of MBO(Multiband Operations), the Assoc IE's including
MBO IE need to be sent to FW as part of Roam Scan Offload command
so that these IE's can be used later in firmware initiated roams
Change-Id: Ia873c65a7813ae63d8e53d7445095990b0c2fed7
CRs-Fixed: 1039969
(cherry picked from commit 0af3520421400b65002604e0a3a9c7c714cc1e21)
qcacld-2.0 to qcacld-3.0 propagation
During P2P functionality, Host will send GO NEG REQ and
receives ACK completion from firmware which will be queued
to indicate HDD. Meanwhile if host receives GO-NEG RESP it
will be sent directly to HDD via function callback. In HDD as
we got GO NEG RESP before ACK completion for GO-NEG REQ, HDD
will generate pkt completion for GO NEG Request.
Now GO NEG CONFORMATION frame will be sent and driver will be
expecting completion for this. The GO NEG REQ ACK completion
which got buffered in PE will be delivered to Supplicant and
Supplicant assumes that this is the ACK for GO NEG CONF frame.
This causes early termination of remain on channel due to which
firmware may drop the GO NEG CONF frame and may not retry as ROC
is terminated.
Fix this by making ACK Completion indication to HDD via function
callback.
Git-commit: 32ddf4196f423b8eaea7ec6c0816e2961aa7fc45
Change-Id: I0dd3acb236b270839649d2becfdc007e7aae9fdd
CRs-Fixed: 1012547
(cherry picked from commit a3996d421de7f55d5a6f7da19d7ff4b568ce7c50)
(cherry picked from commit 42405db3bd3f4b10800cde8cdcd14f521461a5a7)
Send HT/VHT CAPs IE to firmware per band. This will allow certain
features like LDPC to be configured per band.
Change-Id: I21c83af984f9be3ade46121ef148b52568c3ad0f
CRs-Fixed: 1055774
(cherry picked from commit 2a94c5666ea0c66477d0086c8d5a401db8e4afcf)
Handle protected dual of public action frame in lim_process_action_frame.
GAS comeback request/response frames will be converted into protected dual of
public action frame on encryption. These frames should be passed to userspace
for further processing.
Change-Id: I25e7f06369cdd238a561ddb5a825a63fe35f7b17
CRs-Fixed: 1063665
(cherry picked from commit 7745335fbdebcd81b274c703e5a080d61dd86428)
qcacld-2.0 to qcacld-3.0 propagation
Some MTRACE logs returns 'unknown code' instead of code and data passed
to MTRACE. To resolve this unknown code issues in MTRACE logs,
add any missing MTRACE code enums in corresponding trace functions.
Both mac_trace_msg_tx() and mac_trace_msg_rx() were not handling
eWniMsgTypes enums, we don't have module Id for SME to handle
in those functions itself. So, modified mac_trace_msg_tx() to mac_trace().
Change-Id: Ia994c971178e24843f652b67336afeaec5e949ab
CRs-Fixed: 871983
(cherry picked from commit 5e12a6f7a67de546c8567341f35707da61cf00b8)
After completing NDP initiator and response between two NDP peers,
ping failure between the peers is observed due to mismatch in the
broadcast station id set in the driver and the broadcast MAC address
for the NDI. This sta id is eventually used as local id to fetch the
peer associated with the sta id and extract the vdev id from the peer
handler, which was pointing to the incorrect vdev leading to ping
packets drop in the firmware due to incorrect vdev id.
Assign the broadcast id for NDI same as the NDI self
peer's sta id, which will point to the correct vdev id.
Change-Id: I4a4eeae149a4347da236cb768cf41141d9efdaca
CRs-Fixed: 1059527
qcacld-2.0 to qcacld-3.0 propagation
Currently, since we are using same member from lim structure for p2p and
TDLS there could be possibilities that session id is overwritten
by p2p which would lead in not sending Tx completion indication from
lim to hdd thus leading to Tx timeout though we have received tx completion
indication from FW.
Fix is to create new session id for TDLS frames transmission
Change-Id: I1f78f24ac01e0b26c92238dbe831af88aa267bd5
CRs-Fixed: 991455
Turn off opportunistic key caching (OKC) in firmware based on
"OkcEnabled" parameter in WCNSS_qcom_cfg.ini.
It is enabled by default and can be turned off with value 0.
Remove FEATURE_WLAN_OKC compilation option because OKC is always
compiled in for cld3.0. Remove underlying empty routine
cb_notify_set_okc_feature_enabled().
CRs-Fixed: 1057181
Change-Id: I174e860abef0532d62517635fe56927d8c3c9fd3
