Due to usage of lithium specific structure, the filter settings
were not getting reflected in the htt msg that is being sent to
FW. Usage of BE specific monitor pdev structure is helping out
in configuring the monitor filter settings for various modes.
Change-Id: Ie4a59ec16717d752c6c49624142966722bfacc08
CRs-Fixed: 3118596
Add function pointers to free buffer address stored in status buffer
and support tx monitor in legacy and Waikiki flow.
Change-Id: I28612d388009292ff751fe514183fb801909f485
Introduce a new flag "BE_PKTLOG_SUPPORT" for beryllium specific
pktlog support.
Change-Id: If91156541b322905ad5d97cf2d9d7ae687290ecb
CRs-Fixed: 3115832
- Fixes for compilation issues after enabling
monitor 2.0 support.
- change copyright year for all files in the chain.
Change-Id: I885e257bd8ca83850656d8a1f408c1bc34920d7a
CRs-Fixed: 3086483
- make monitor ops per soc, so that when ops are
reset it will not impact other soc.
- reset filter setting during pdev deinit.
Change-Id: Ic40582fc1d03343d0bfaf879177212ecb83ae058
CRs-Fixed: 3086841
Enable the interrupt based processing in monitor mode
for WCN7850, by enabling MSI interrupts for rxdma
monitor destination ring.
Change-Id: Ia3c4456d28ed58c8ef49a7aa8e711076fbdf9415
CRs-Fixed: 3094129
In WCN7850, the tlv header width is 64-bit and the tlv header
start is 8-byte aligned inside the monitor status ring desc.
Add changes to parse the monitor status ring TLV according
to the TLV header width.
Change-Id: I19860b871abbc3037174b9d0ae5ed6e52b1eb736
CRs-Fixed: 3084443
Add function pointer to update stats for LI and WKK
Add new fields in structure cdp rx stats
CRs-Fixed: 3071271
Change-Id: I6a1d7afbdfe47d171335d55bf66d210d785f5a03
Add function pointer and initialize with function
to update stats for WKK
Add new fields in structure cdp tx stats
CRs-Fixed: 3071271
Change-Id: Ib1fd867e414b8a61cff4f462434c51541f925f62
Moving HTT parsing to common file dp_mon.c
Initialize function pointer to stats ind handler for BE
CRs-Fixed: 3071271
Change-Id: I08fb98f8dbed075c3b49baebca399771bfb5077c
Currently dp_mon_register_intr_ops is defined conditionally
using DISABLE_MON_CONFIG macro but function call is independent of
DISABLE_MON_CONFIG which may cause compilation issue when
DISABLE_MON_CONFIG is disabled.
Fix is to add void function definition when DISABLE_MON_CONFIG
is disabled.
Change-Id: I5f0bafa1aa3560a5828500a687b8b11178ab945b
CRs-Fixed: 3084193
- A new pktlog mode called "hybrid", is added for QCN9224 only.
- Create WDI event for hybrid mode
- Add dummy APIs for monitor filter setting
- Send WMI_PKTLOG_EVENT_HYBRID_TX to FW for umac TLV subscription
Change-Id: I47f4e14bfc766f29a0ab4a8c07ab19e0d919e66b
CRs-Fixed: 3074184
Some platforms don't have mon_register_intr_ops enabled so add
a similar macro around dp_mon_register_intr_ops to resolve
compilation issues.
Change-Id: Id9c7bb45d965005d4dd0dde3a08f254464244147
CRs-fixed: 3075651
When monitor KO not loaded Return QDF_STATUS_E_FAILURE
from dp_monitor_tx_add_to_comp_queue() so that caller
will free the buffer
Change-Id: Idebcf81121767ccd93d95308433241fcf0a93c93
Add stop timer flag to avoid resubmission of tx capture work queue timer
while del_tiimer_sync.
CRs-Fixed: 3056656
Change-Id: I72bfb6916f02297b15bb733359c0e4d7f91f0b73
- Add support htt msg for HTT_H2T_MSG_TYPE_TX_RING_SELECTION_CFG
msg configuration
- Add support for configurable length dma
per packet type for rx monitor.
- Add support for wordmask subscription for rx monitor.
- Add support for per packet msdu/mpdu logging config.
- Add support for tx monitor tlv subscription.
- Dummy APIs for 2.0 filter configuration
Change-Id: I36b18c03eff452537c2f051b24275b81ab98ebae
CRs-Fixed: 2991330
- Change to allocate BE specific monitor soc
- Allocate, initialize soc and pdev level monitor rings
- HTT srng setup for source ring
- Dummy APIs to allocate, initialize sw desc pool
Change-Id: Icf90994e7bd76017cf3c83ae00449d839967321d
CRs-Fixed: 2991298
- New data structures are added for BE monitor support
- dp_mon_soc_be - to maintain soc level BE specific fields
- dp_mon_pdev_be - to maintain pdev BE specific fields
- dp_mon_desc_pool - to maintain descriptor pool
- Monitor ops are updated for 2.0 and corresponding dummy APIs
are added.
- dp_mon_filter_srng_type is enhanced for TxMON
Change-Id: I12a2fbc53e4eecc7a191b7aa925431298d0a9f54
CRs-Fixed: 2991276
- Features common to both Li and BE and
their APIs are retained files at dp/wifi3.0/monitor.
- New monitor ops are introduced if there
is a requirement for divergence of API.
- Diverged API definitions for 1.0 are captured
in this change.
All of code in below files are moved to 1.0
- dp_rx_mon_dest.c -> 1.0/dp_rx_mon_dest_1.0.c
- dp_rx_mon_status -> 1.0/dp_rx_mon_status_1.0.c
Only Li and HMT specific are moved for below file
- dp_mon_filter.c -> 1.0/dp_mon_filter_1.0.c
- dp_mon.c -> 1.0/dp_mon_1.0.c
Change-Id: I44d163b27565b86068d80e1d97ec11d0b4a081d4
CRs-Fixed: 2991248
Currently there is an attempt to allocate monitor
peer even when the feature is disabled, thereby leading
to an attempt to allocate 0 bytes. the failure in this
allocation propagates back and prints an error message
which can be misleading.
Disable monitor peer attach when the below feature is disabled.
- WLAN_TX_PKT_CAPTURE_ENH
- FEATURE_PERPKT_INFO
Change-Id: Ifc6ba1421da0f569971fafa530bbcd3dbaa16b87
CRs-Fixed: 3036720
"Invalid peer id" prints are flooding the AP console
Adding log level as fatal to avoid these prints.
Change-Id: I773476542018389035996e45ea2f7c4cf296e9fd
Add dedicated monitor flag at SOC level and do not
enable legacy monitor rings for QCN9224
Also add flag to disable rxdma2sw ring for QCN9224.
Change-Id: I399d22d6c3361bb75ebaad4e46b156db5e628d6b
Conditionally compile scan radio special vap stats.
Also rename spcl_vap to scan_spcl_vap to better reflect
funtionality.
Change-Id: I7d7f636209f6aa12cca0a3e808d7ae1fac9f397d
CRs-Fixed: 3009837
This patch adds the function dp_update_msdu_to_list to dp_mon_ops
struct. This is needed for supporting tx capture module in NSS
offload.
Change-Id: Id36aa6d1442eed4112585807e8798fc28ccdc424
-Add flag to inidicate special vap configuration
-Add frame type counters while processing tlv
WIFIRX_MPDU_START_E
-Add function to update special vap rx stats
-Add dp pdev param to enable/disable special vap
stats reset
-Add function to reset special vap stats
-Add fucntion to get special vap stats
-Add CDP function to retreive special vap stats
Change-Id: Ia5de6743e472dc86c9e66b9e789c909a57025e35
CRs-Fixed: 3005425
PATCH[7/7]:
This patch consists following changes:
-Conditionally compile all monitor destination ring related code
Macro used QCA_MONITOR_PKT_SUPPORT
-Add QCA_ENHANCED_STATS_SUPPORT macro to conditionally compile
enhanced stats support
-Use QCA_MCOPY_SUPPORT and QCA_TX_CAPTURE_SUPPORT macros
to conditionally compile MCOPY and Tx capture features
respectively
-Use QCN_IE macro to conditionally compile BPR
feature
-Use QCA_ADVANCE_MON_FILTER_SUPPORT macro to conditionally
compile advance monitor filter feature
-Fix vdev attach issue for special and smart monitor vap
-Fix status ring initialization issue.
Change-Id: I0deaa28a9a54bf34b0f41e6dd510fdd8d4992db2
CRs-Fixed: 2983780
PATCH[6/7]:
This patch consists following changes:
-Move monitor related pdev variables to struct dp_mon_pdev
-Move monitor relted soc variables to struct dp_mon_soc
-Move cookie to monitor link desc va to monitor file
-Add APIs to access monitor related variables
-Add dummy APIs to build without monitor support.
Change-Id: I032a480b1383d061f984cee3ba6b10ac7a0ff350
CRs-Fixed: 2983781
PATCH[5/7]:
This patch consists following changes:
-Monitor vdev context allocation while vdev attach and free
while vdev delete
-Monitor peer context allocation while peer create and free while
peer delete
-Move monitor vdev timer function to monitor file
-Move monitor reap timer handler function to monitor file
-Move monitor timer related variables to monitor file
-Add timer init/deinit and start/stop in monitor file.
Change-Id: I9c7910671d3678c53ca9ec44a57bc10e892008d9
CRs-Fixed: 2983994
PATCH[3/7]:
This patch consists following changes:
-Move struct cdp_mon_ops to dp monitor file
-Add new function for dp monitor soc cfg initialization
-Move full monitor mode function to dp monitor file
-Move vdev set monitor mode function to dp monitor file
-Move config debug sniffer function to dp monitor file
-Move set advance monitor filter function to dp monitor file
-Set monitor delayed replenish entries for target types
Change-Id: If8dac4eedc0c8eb4e956df34c7c3adae8712c840
CRs-Fixed: 2983939
