Add storage for EHT mac and phy capabilities as
per 11be D1.0 and update the EHT mac and phy capability
sizes.
Change-Id: I67224b35b701235374772e9975375e695f3ed959
CRs-Fixed: 3000166
In WMI INIT, check whether firmware supports the ack event or
not. If it supports then enable driver support and send it to
firmware during WMI INIT.
Change-Id: Icfdee6bc06e6a393de880b87fdab70665ea7c8b4
CRs-Fixed: 2987898
Currently host is populating secondary channel list from master
channel list based on ap power type. In case fw doesn't support
extd cc event then secondary channel list will not have 6g freq,
which may break legacy 6g handling.
Fix is to add validation check for ext cc event support, copy
secondary channel list from ap power type in case ext cc event
is supported by fw else copy secondary channel list from reg
current channel list.
Change-Id: I2e13be2936b624ccbee5e8e426987355076a0062
CRs-Fixed: 2987951
Add TWT service bit capability support to check whether firmware
supports ack event or not. If firmware doesn't support ack event
then service bit capability will become 0 and whenever TWT
command comes, host will not wait for ack event and sends command
in a legacy way.
This support is mainly added to handle new host and old firmware
combination.
Change-Id: I55d373c2e017130b58a4b332da16f0eda8f34eba
CRs-Fixed: 2987749
Changes to derive chain phase values out of Hardware
reported agc gain and target reported AoA phase calibration
values. AoA for RCC to be supported based on target shared
capability. AoA phase delta & ibf cal values are shared by
target upon every channel change via WMI event.
Change-Id: Ic4fca3731b795e07a511388f6dbb15a46d676a77
Check the below service bits and set in psoc if the service is supported
by FW.
WMI_SERVICE_RTT_AP_INITIATOR_STAGGERED_MODE_SUPPORTED
WMI_SERVICE_RTT_AP_INITIATOR_BURSTED_MODE_SUPPORTED
Change-Id: I13504958bf31b2d645d915b4db20719bdc9a4133
CRs-Fixed: 2969195
Modify APIs target_if_dbg_print_samp_msg() and
target_if_dbg_print_samp_param() to use the
new formats for spectral_samp_msg and
target_if_samp_msg_params, respectively.
CRs-Fixed: 2961953
Change-Id: Ib0776c2189e9ca1dc33d38f2a7609aa6d15959ee
Add a new API free_samp_msg_skb(), to free
SAMP msg buffer, if error in phyerr processing
for 160/80p80 MHz modes. Call this API from
reset_160mhz_delivery_state_machine(), to
avoid redundancy.
CRs-Fixed: 2961987
Change-Id: I3a0488997e474fef6f4f57e3fbfd1a163c91ac7b
Add API target_if_spectral_populate_samp_params_gen2() to
populate fields in target_if_samp_msg_params, using
search fft report and target_if_spectral_rfqual_info
fields.
CRs-Fixed: 2961986
Change-Id: Iad970483f6183d2e52d97e6c3ddf8f146845fbe4
Add API target_if_spectral_populate_samp_params_gen3() to
populate fields in target_if_samp_msg_params, using
Spectral report, search fft report and spectral scan
summary report.
CRs-Fixed: 2945300
Change-Id: Idce57af9a198773491f6c6bc7303641ec0fb15a7
Modify struct target_if_samp_msg_params to only include
fields to fill the new SAMP message format, which
are not present in the per-session report-level
info and detector map structures.
CRs-Fixed: 2961956
Change-Id: I54f69bb63c5b64a59cb83b9f205c74c83475fc14
Add sscan_detector_list struct to store the number
of detectors and detector list for a given Spectral
scan mode and channel width, based on the target type.
Initialize this struct during target_if_pdev_spectral_init.
CRs-Fixed: 2961954
Change-Id: Ia920438429579c096349a0170d15e288d46cf9a9
Add API target_if_spectral_get_start_end_freq to set
start and end frequencies in the per-session
detector level map, based on spectral scan
cfreq1/cfreq2 and operating BW.
API target_if_populate_detector_start_end_freqs handles
population of the start and end frequencies per-detector,
in a session.
CRs-Fixed: 2961957
Change-Id: I68a052db6643d92c22e7ee671f4e46af33c2fa08
Replace numerical values with macros, for indicating
position and size of Spectral FFT report fields, in
target_if_consume_sfft_report_gen3().
Change-Id: I81994ebb0d642bc4cbebe2b24aabcae567ae6a9c
CRs-Fixed: 2945319
Modify prev_tstamp variable in target_if_spectral
structure to an array and index it based on detector ID.
Also, modify target_if_spectral_verify_ts() to include
detector_id parameter and compare current timestamp with previously
received sample on per-detector level, to check discrepancy.
Change-Id: I9f6382909ac0661323db54f160f1350cb8bd8153
CRs-Fixed: 2945318
Add target_if_spectral_get_num_fft_bins() to find the
number of FFT bins, from the Spectral FFT size.
It will adjust the number of FFT bins according to
Spectral report mode.
Change-Id: I8f81f2b784d71387f951c38701af6cf4443246e0
CRs-Fixed: 2945316
Add API to fill FFT bin start and end indices to the
detector map, depending on the values of cfreq1 and cfreq2.
This is to handle samples where the frequency of
Detector 0 is greater than that of Detector 1.
Fill the start and end indices for bins such that
the bin_pwr array is in increasing order of
frequencies but the order of detectors same as
that sent by the HW.
Add API target_if_update_session_info_from_report_ctx(),
to populate the per-session information in the
consume report context. This includes population of
start and end bin indices on per-detector level,
start and end frequencies on per-detector level
and cfreq1/cfreq2 on per-report level,
Change-Id: I044c6961e5f710089b0192876e8717f9127b497f
CRs-Fixed: 2945315
Find the last_raw_timestamp and adjusted_timestamp
as part of the FFT report processing API.
Change-Id: Ibc7fd524ca897ead3b4b8ca25ba6e6487154305d
CRs-Fixed: 2945307
Fill per-session information in per_session_det_map and
per_session_report_info, with per-report and per-detector
level information, respectively.
These intermediate structures help in filling the
SAMP message.
Change-Id: Ib194fde3567ce76710e010febf729746fedf7a2c
CRs-Fixed: 2945297
Add a new API target_if_fill_samp_msg, to populate
the Spectral SAMP message and detector level
information, using pdev_spectral_det_map
and per_session_report_info. Send the SAMP message
to upper layers when completely filled.
Change-Id: If43494fe4a09dbfeb9aea6cb0fa20b406d81e390
CRs-Fixed: 2945282
Refactor target_if_consume_spectral_report_gen3()
and divide the functionality into individual
functions.
This will be under OPTIMIZED_SAMP_MESSAGE flag, which
is unset by default for all profiles, till
development is complete.
Change-Id: I07e753dcaff6e81dfc8739df4e691d871c921581
CRs-Fixed: 2945171
A state machine checks if spectral reports are
in order for gen3 spectral 160/80p80. Currently,
this state machine has four states.
Modify this state machine to have only two states and
change associated APIs accordingly.
Change-Id: I754758fdf0529394c63fe371f54db79d52459999
CRs-Fixed: 2945161
Define a map with per-detector information, that is
keyed by the detector ID from Spectral FFT report.
Use per-detector information from this map to fill
the Spectral SAMP message.
Define struct per_session_report_info, for per session
info that needs to be filled at report level within
SAMP message.
Change-Id: I9f73bd904cc3d4cac42d21b89b1ceb586da7f911
CRs-Fixed: 2945158
Modify the API to include Validation and
processing of Spectral search FFT report.
This will be under OPTIMIZED_SAMP_MESSAGE flag, which
is unset by default for all profiles, till
development is complete.
Change-Id: I250867e2c002f491f51a36416ea9ca5ae0bc5508
CRs-Fixed: 2945132
Modify target_if_consume_sscan_summary_report_gen3() to
include validation and processing of Spectral summary
report.
This will be under OPTIMIZED_SAMP_MESSAGE flag, which
is unset by default for all profiles, till
development is complete.
Change-Id: Ice88b8e74ed714515f21b9b232aa0088fbb54d1d
CRs-Fixed: 2945124
Handle DCS-AWGN event and take actions accordingly:
For STA mode, if the interference locates on primary 20MHz,
disconnect from AP; otherwise, find a max interference free width
and trigger channel change.
For SAP mode, if the interference locates on primary 20MHz,
try to select a random interference free channel and trigger channel
change (stop SAP if no channel is selected); otherwise, find a max
interference free width and trigger channel change.
Change-Id: I33e79f454b459b12ad84f8b0f3259403037464ee
CRs-Fixed: 2958675
Currently the 6G edge channel feature is MCC specific.
Make the 6G edge channel feature common for WIN and MCC.
Change-Id: I723b6db1d74dca5a911eede4ec6e6167f6b3e6bc
CRs-Fixed: 2976871
This reverts change-id I176b9c09106cc0d7f5cfbc474912e4a48d633ff2.
The 0 count chan avoid event is used to clear all previous reported
chan avoid freq range, so it can't be skipped.
Change-Id: Ie01d88c353a7f71bbee70ae67f54147ea147f6d4
CRs-Fixed: 2970061
Add parameter 'bool sync' for wlan_cfg80211_crypto_add_key()
to indicate whether or not to add key synchronously.
If it's set to true, wait until install key complete event
is received.
Change-Id: I9a69d486665fb3f65a5720ccfbfb638c09329418
CRs-Fixed: 2865832
Add mcs rate, gI type and other SU sig info to cfr metadata.
For Tx based capture mcs rate & gI type is applicable
MCS For legacy mode
0: 48 Mbps
1: 24 Mbps
2: 12 Mbps
3: 6 Mbps
4: 54 Mbps
5: 36 Mbps
6: 18 Mbps
7: 9 Mbps
8: invalid entry
MCS for HT, 0-7: MCS0-MCS7,
MCS for VHT, 0-9: MCS0-MCS9,
MCS for HE, 0-11 MCS0-MCS11, 12-13: 4096QAM
GI:
0: 0.8 us
1: 0.4 us
2: 1.6 us
3: 3.2 us
ltf_size:
0: he_ltf_1_x
1: he_ltf_2_x
2: he_ltf_4_x
dcm: Indicates if DCM set
0: No DCM
1: DCM
sgi: Indicates if short gI used
0: No short gI
1: short gI
beamformed: Is packet beamformed
0: non-beamformed
1: beamformed
stbc: Indicates if stbc applied
0: No STBC
1: STBC
Coding:
0: BCC
1: LDPC
Change-Id: If6ab4b4878ab24406aba0e890ec08a2dae2b4634
Fix the compilation error post movement of CFR files to
cmndev and rename cfr init deinit APIs to be chip
independent. Also port fixes from component_dev.
CRs-Fixed: 2938886
Change-Id: I2f5637f5717ce5154e3b642c3ade646794e99602
Move CFR to common project and rename the files as it will
be shared with other targets as well. Fix checkpatch errors
too.
Change-Id: I66481848036212aedab74c9c18848070ac1a3511
When obss scan is enabled, FW will trigger scan periodically by
a timer. If a scan was triggered, FW need to access host memory
for data transfer. Occasionally, suspend may happen during one
scan, then FW is unable to access host memory and fw will crash.
So disable the obss scan before suspend.
Change-Id: Ie507da929a3701473cb57888e96e702e34d4c95a
CRs-Fixed: 2927239
When host failed to find out vaddr by paddr from FW, output more
information for debug further.
Change-Id: I65c4965c12c2ffa3fe2a26a82df01d1b91501c73
CRs-Fixed: 2925194
Driver gets vdev by wlan_objmgr_pdev_get_first_vdev and returns wrong
vdev in some platforms, and then gets wrong channel/phy_mode. This
change gets vdev by id and fix this issue.
Change-Id: I814d516361238afbd0345bc362c286d1cb55a7d4
CRs-Fixed: 2933525
Separate the common fields of csi_cfr_header and update
the logic of calculating the cfr_metadata_len.
Move cmn header update code to single place.
CRs-Fixed: 2916901
Change-Id: I97d99df45f667f4ed3b80264b12d3d09a3bcae95
Sometimes firmware sends spectral events repeatedly with
wrong vdev. This causes continuous error logs are
written to kmsg.
Replace info prints in target_if_consume_spectral_report_gen3()
with debug level prints.
Change-Id: I2ca4be7d0d13e841a6dbd4efbc02ecd2b12893f8
CRs-Fixed: 2926759
