Update the uidle wd timer load value to 18. This change will allow
a 15us wd timer per hardware recommendation.
Update fal1 threshold value to take the minimum of 15 or the
current setting which takes line time and target idle time into
consideration. The target idle time is also being updated from 10us to
40us.
Change-Id: Ia8d9c2070813beef18fdf342526d82cf8f82989b
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
During back to back mode set, current driver logic fails
atomic check during resource allocation with test only if
previous commit also with modeset, has tagged resources for
allocation but did not commit the resources yet. Since client
invoking atomic check before previous mode set commit complete
is an expected scenario now, instead of failing atomic check,
this change allows resource allocation for next commit also go
through by pollong till the first mode set is complete.
Change-Id: I1261b7d205bb0d886085664fab3664162a419c99
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
Vblank refcount can reach out of sync with below case
1. event_thread triggers the vblank_enable
2. commit_thread triggers the modeset
2.a modeset resets the vblank refcount with mode_set
3. event_thread triggers the vblank_disable
Event 2.a resets the vblank refcount and vblank disable
request after 2.a is going to fail. This can be fixed
by avoiding concurrency between mode_set call and vblank
request.
Change-Id: Ibb810ec90e81d63feee443f1c37dd736d5cfac0d
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Allocate DSI/LUTDMA buffers from VRAM when IOMMU is not
available. Add checks in msm_gem to avoid few operations
when aspace is not available due to no IOMMU. Parse the
VRAM size from device tree, when available.
Change-Id: Iedf5749b71c2e772ac5434048520a34705c54b45
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add debug capability to dump clocks before entering pm suspend.
This will help debug invalid register access when clocks are off
during adversarial test cases.
Change-Id: I80d19b751a3b9a1de0cc64699a21a1852d614ced
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Add a CRTC property to request the VM to acquire/release
HW resources.
Display driver in trusted VM boots up without HW ownership. Set
the default value of the property as RELEASED to handle resource
assignments.
Change-Id: Iea651a2fea902d95d4b954052af4ef016af15a91
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
VM switches during TUI usecase are expected to be seamless i.e without
display reset. In SDE language, this translates to respective display
drivers not tearing down the HW pipeline while releasing the HW.
In Primary VM, this taken care by keeping the DRM pipeline alive when
TUI is active.
In Trusted VM, since the client creates and destroys the display per
session, checks are needed to bypass the physical encoder disable(s).
Change-Id: Iac42f02806962405c9364b1ffed85778229977e9
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Add a new hw catalog flag to indicate target support for
trusted VM. Currently, the flags is set for Lahaina target.
Change-Id: Idb56492758ef580673b2ebf44fecd577a2876f1b
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Current SDE driver allows staging of rect1 only configuration. When a
real plane is disabled sspp multi rect configuration is not updated.
This can lead to iommu faults and ping pong timeouts as framebuffer of
disabled plane is unmapped. This change fixes it by updating multi rect
config accordingly when a plane is disabled.
Change-Id: I67ae45ad0e607184c7fc49f4b220220ba1d8a2ae
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
CWB may trigger frame missed message if interrupts
are disabled on specific CPU. WB2 will only find single
interrupt status for two posted start triggered frame.
SDE driver will start checking the xin client clock
status for wb2 timeout case to trigger the valid
frame done status.
Change-Id: I16a99667116732002e6dec8a18330f8b45199387
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Trusted VM will be assigned MDSS HW access dynamically only on TUI
use case start boundary. So, any HW access during the boot sequence
will result in stage2 faults. But SDE driver initializes few HW
blocks during the boot up sequence. This change fixes them by either
skipping those accesses, if those registers expected to be programmed
by the Primary VM or postponing those accesses until the HW is
assigned.
Change-Id: Ic85238c5d734e9ac993072374c1b0ae661708fca
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Assign default drm device for dma buf_attach when
IOMMMU is not present and for stage-2 only buffers.
Avoid setting lazy_unmap for stage-2 only buffers as
it doesn't have any impact without nested translations.
Assign default drm device when no device is found to
support transitions between secure usecases where
the nested context banks might not be attached back
at the prime_fd_to_handle time. These buffers would
be attached with the correct context bank device
during the delayed_import.
Change-Id: I9ccb38876d7843b4411762c7b8006ae8fca85391
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
sde_connector_init will return an ERR_PTR if connector
creation failed, so need to use IS_ERR_OR_NULL to check
the return value.
Change-Id: I4fee5a624261898bbd079c54705e6eaebc71bac6
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
ICC frameworks may not be enabled for all the OS
environments. SDE is expected to work in the environments
where ICC paths are not defined e.g Trusted VM. Except
mnoc bus, SDE is keeping all the other paths optional.
This change adds mnoc bus to the optional list.
Change-Id: I1e3d31a3b0f49fb32041bc7e2192b014f6497267
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Adds a DT property to indicate trusted VM execution
environment and support catalog parsing for the same.
Add helper API to read the value.
Change-Id: I9194618b6f080119f1f15271a9b3c7edf938ca08
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Existing cwb enable detection logic relies on
crtc id matching with each encoder->crtc. This
may not be available on first power on commit
because it updated after encoder_atomic_check
call. This patch fixes the cwb enable detection
logic by checking the encoder_mask on crtc_state.
It also fixes the cwb concurrency with mode_set
and secure display.
Change-Id: I70f656dd9e7d94d3ba761c25745b473a1c204173
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Allow caller to specify the default value of the enum
property while installing with msm prop layer. It is
not always the case that the default value to be the
first entry.
Change-Id: Ie0bb1ad7479e3e07810b3d817fdf618b1935858c
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Register for getting a blocking notified call when the display cooling
device mitigates. Update the current brightness to the thermally allowed
level.
Change-Id: I20945a20751646e6d9bbf8bb7e7039c6ce43c306
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
Add display cooling device interface, which will enable to register a
cooling device and send a blocking notifier call when there is a new
mitigation request.
Change-Id: I59e4a7190f637fba7f63e47ff495242718cc3c9b
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
Current dp_mst_bridge has variables that are accessed by both
check phase and commit phase, which causes racing issues. This
change will add private state to dp_mst_bridge to separate check
phase and commit phase.
Furthermore, this change is a partial rollback of commit 2446602565ec
("drm/msm/dp: add private state to dp_mst_bridge") where active_enc_cnt
is removed. In this change we retain the encoder availability check in
mode_valid.
Change-Id: I8ac05cf5f1755375e4e9f34e42dbaea1d23bac64
Signed-off-by: Xiaowen Wu <wxiaowen@codeaurora.org>
Signed-off-by: Sankeerth Billakanti <sbillaka@codeaurora.org>
The single "port" refcount has been split in 2 on 5.4. MST sim
layer is only getting the topology refcount but never initializes
or obtains references for the memory allocated for this port.
Add the new refcount logic required on 5.4 to MST sim layer.
Change-Id: I6e25c048fa26352c4fb718996514a1ca91432408
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
Add function to parse pll_codes from dfps_data_region, and the
pll_codes are used as trim_codes for RFI.
Change-Id: Ic81529cd685f17012809fb68cefc4b36cb1172ca
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
This change adds the support for checksum collection and notifies
to user space as part of drm event.
Change-Id: Ib2a6c38c74d1fb60d274cdb685b74979202604eb
Signed-off-by: Lakshmi Narayana Kalavala <lkalaval@codeaurora.org>
Change updates the DSI DPHY and CPHY settings as per
hardware recommendations.
Change-Id: I3472ab0214c2c915a3f68893dd4b19edd36bb26d
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
QSEED scalar block HW revision is constant for a given MDSS revision.
Both SSPP and DS HW files invoke this API to read the revision register
at various points of time. Expose this revision information through
DT binding and maintain in the catalog to avoid repeated register
reads.
Change-Id: I95c0a5242cfda0aaa4ec5c2ff5c7cc0bed191b59
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Rename the property to qseed_sw_lib_rev to indicate that it
represents the qseed sw library revision that is compatible with
the targets qseed hw version.
Change-Id: I5a588dc20cf4a4f76f5c71301538bfc630ea220d
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Log the status of the call to kobject_uevent_env so we know
whether the uevent was sent successfully to the userspace.
Change-Id: I4fd5f9b51d9771dab399e322d678411f824c8aba
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
A frame trigger with posted start may have two frames
in wait state due to irq disable on that CPU. In such
case, frame_done count can reach till 2. Allowing count
only till 1, can cause the release_fence trigger miss
and a buffer is held by DPU driver.
Change-Id: I42c10b064ebcaff136591975f3010c11f99a0731
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Return ERR_PTR with -ENODEV when the USBPD module is not
enabled. This allows the DP driver to handle the failure
correctly and prevents any potential NULL pointer
dereferencing in the clean up path.
Change-Id: I4fbc559276bebe770a27935243a59c10c1bb5491
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
Treating hw version as a signed int results in a negative
number when major version is more than 7, leading to errors
when comparing versions in the driver. Fix this by making
sure all HW version definitions and variables are unsigned.
Change-Id: Ic77183f85e5408092e05817cf95df5b0f0fcac75
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
SDE driver started supporting multirect mode with rect_1 only
configuration. In such case, master plane can not trigger
pipe fetch halt independently. This change removes the pipe
fetch halt check completely because it was only done for
master plane without buffer flip usecase. AXI fetch halt
provides similar functionality during idle power collapse
and suspend-resume.
Change-Id: I79d9d0eac2de95f1bb88561c7cc259e0cc4b2ca4
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
