Enable bits in WMI_INIT command to let the FW know about host's
capability to support notify frame feature. If the feature is enabled,
host can mark certain TX frames as "notify frames" for hardware and they
need not be sent to FW. FW depends on this capability exchange to decide
whether to install HW rules for frames to be sent to HW.
Change-Id: I7158e79ae0fbdc73a2f4096ae1577337e8291246
CRs-Fixed: 3209399
Since more than one components depend on reap timer of
monitor status ring, add bitmap to record the trigger
sources of the timer and refine the APIs/calling functions
accordingly.
With this change:
When a new start request comes, if the source is
CDP_MON_REAP_SOURCE_ANY, skip bit set, and start timer
if any bit has been set in the bitmap; while for the
other sources, set the bit and start timer if the bitmap
is empty before that.
When a new stop request comes, if the source is
CDP_MON_REAP_SOURCE_ANY, skip bit clear, and stop timer
if any bit has been set in the bitmap; while for the
other sources, clear the bit and stop timer if the bitmap
is empty after that.
Change-Id: Idaa7837c4b93b247ff2236aa5072d309fa9548c2
CRs-Fixed: 3190347
This enables the option to configure when a peer's
TID queue needs to be flushed. This is required to
discard packets that are no longer useful to the application.
Change-Id: I558debff043fc0c8038e5f5f2c815b64c90e1561
CRs-Fixed: 3130422
Use CONFIG_SAWF macro to prevent linking dp_set_delta_tsf in
low memory profile.
Change-Id: I07b75f893e6d043839225d9b7288823b6ef2f823
CRs-Fixed: 3211426
For telemetry agent, some more statistic support is required.
Hence, add support for telemetry agent required stats.
Change-Id: Ieb2210a4a5dfe6fa0a0dd46a85f2d9ae483bb746
CRs-Fixed: 3210797
Add WMI command for tx peer filtering. This command is needed to send
the mac address to FW for which tx monitor peer filtering is needed
to be done.
Change-Id: Ia141fba81ba240b7f4ca015eb9251e3485294bb6
CRs-Fixed: 3199493
Add ini support to configure TC ingress filter priority
value which would be used for TC based dynamic GRO.
Change-Id: I1742f4539353939e3a40ff4096b3f833f2029b12
CRs-Fixed: 3206817
Add cdp api to get accumulated pdev tid stats along with per tid
total tid rx and tx stats.
Change-Id: I7862c4265f199d0588d8865c5ed97e06010dd79f
CRs-Fixed: 3207499
Define a new function to calculate HW delay so that same logic
can be used to calculate delay by other modules.
Change-Id: Id3740bcaa2cd558b89ab02d8e88d5947eb5997b1
CRs-Fixed: 3198305
HW Tx delay to be calculated in microseconds based on the timestamp
provided by HW. A new type of hist bucket is added for this delay.
Change-Id: I3cae5e78459f675b5ac7f670bdec950f9a62c78f
CRs-Fixed: 3202312
Rate limit the log in non-TQM Tx completion path and add a counter
to increment whenever Tx completion status is received and release source
is non-TQM.
Change-Id: I8968ccc7a499577bd4fdfaef78e6520b00c12503
CRs-Fixed: 3201403
-Some of the lite monitor enums can be used outside of
lite monitor feature, make such enums generic.
-Some enums are redundant, remove such enums and make use
of existing ones
Change-Id: I5125384ac5c4c55a57998fb5be5ee1ecb3e61147
CRs-Fixed: 3190754
During frequent channel changes in corner case we observe
that mpdu ppdu id does not match dest ring curring ppdu id.
Such mpdus are dropped. Add stats to count such dropped mpdus.
Change-Id: If52e81f4e718ce0d7f83a41f4f0121394525b9df
CRs-Fixed: 3144784
In VoIP cases, no or minimal packet drop is expected during
roaming. Currently, data packets are dropped in host if they
are received after roam sync indication from firmware and before
peer map indication is received due to invalid peer.
This change allows rx UDP data packets during roaming before
peer map indication is received from FW if peer's auth_status
received in roam_sync_indication from FW is authorised.
Change-Id: Ic518b7cd0aef48a2b0f8c923a2e20838b07f3d1f
CRs-Fixed: 3168603
add tags straight from ppdu_info to headrom for mpdu
tags are positioned per msdu_index within mpdu headroom.
Change-Id: I4863a7929ffd2e0a5d7f91f31ab6059f2b882de4
CRs-Fixed: 3183692
In QCN9224, when 11v DMS feature is enabled use
FW based DMS support instead of SW based WAR.
Change-Id: Icc5b9740f71bd00862e06950e4fe49c663d513b4
CRs-Fixed: 3182547
Currently, in case where AP advertizes BA window size
which is different than our max supported BA window size,
the HW gets configured for BA window size advertized by
the AP, whereas the ADDBA response indicates the window
size of the STA, which is less than the AP.
This mismatch leads to the BA bitmap to be incorrect.
Fix this by exposing an API from datapath for the update
of the final BA window size which is populated in the
ADDBA response.
Change-Id: I81a039f47a775990b426e9aca1daaaa9bdb6e88f
CRs-Fixed: 3187941
After enable and disable of both radio, If second radio is enabled
then the instance_id from wlan driver is passed wrongly to IPA driver
which is in leading to initializion of first radio on IPA driver side.
Fix is to take the instace id based on psoc id and set the prod and cons
pipes based on instance_id instead of IPA given handle.
Change-Id: I26f4f3fbd23284e79a380d212ad07aceac50f053
CRs-Fixed: 3179306
Per peer extended stats are maintained as a histogram having 10
delay buckets. Each packet will fall into one of these buckets as per the
delay calculated. These buckets are now increased to 13 as per requirement.
Change-Id: I7f9a01c21b748a0f589bb44e6f7dd69a1c5702a7
CRs-Fixed: 3163423
Drop 3 address multicast packet on rx when vdev is
has drop_3addr_mcast enabled.
Change-Id: I726bdc9383ea6e5a052a5d754e8f48c98f9ce874
CRs-Fixed: 3163011
Currently, data stall detection is without control over
individual data stall events.
INI variable, gEnableDataStallDetection is converted from
boolean to unsigned int which provides control over events
across FW and host with each bit corresponding to different
data stall events.
Bit 0: Enable all data stall events if set.
Bit 1-30: mapped to data stall events. Used when Bit 0 is 0
Bit 31: Enable aggressive timeout for WLM Mode.
Change-Id: I4656520accd1589e77d5054eaa0a3cb8e63b14b2
CRs-Fixed: 3174906
RSSI calibration parameters are received as part
of WMI event from FW, update these parameters to
monitor pdev via CDP interface.
Change-Id: I5060795918571763ad467aae93729040fbca96a1
CRs-Fixed: 3147897
Add function to setup/reset lite monitor filters
whenever lite monitor mode is enabled/disabled
respectively through cmd line.
Also add function to configure rx header tlv dma length.
Change-Id: Ia5d8bc36e1d033b3e15737bb6b9854f6a7cdd5df
CRs-Fixed: 3143570
With new configuration changes for enable_peer_extended stats, update
code to peer_extended_stats naming for clean codebase.
Change-Id: I97a7ee331042232098382683fefebd05e6b099c3
CRs-Fixed: 3149920
Populate punctured pattern from WIFIPHYRX_COMMON_USER_INFO_E
And get puncture type from puncture pattern.
Change-Id: I3a5ba4c7c478d15cf3c3cfdcfd0573775ae342ca
CRs-Fixed: 3166010
This feature can be enabled runtime using sysfs interface.
Support is added to dump and clear the histogram stats.
The lower delay regions has to be more granular to indicate any
medium related issues for time sensitive XR applications.
Change-Id: I0a44a54d12d92ce016de349810cb2bedebaf9a58
CRs-Fixed: 2981006
Populate rate index in user specific rx ppdu indication.
Also correct the computation of total retries in rx ppdu indication.
Change-Id: I07c55260def9d2f1490729b6390bca3d98085c63
CRs-Fixed: 3156428
Add support to send unit test command to FW to dump
stats on suspend failure due to pending tx completions.
Change-Id: I6afb69a862c366c66a1e1f3dc009964272dfb75a
CRs-Fixed: 3151458
The per packet info feature can be enbaled to support enhanced
stats independent of mesh mode.
Change-Id: I852e7a958c520901b6f418d30deb53fa2f68fb68
CRs-Fixed: 3079000
Display phyrx aborted undecoded frame count and the aborted
reason statistics as part of pdev rx mon stats.
Change-Id: Ia86074e62af3179855734b47801715abd1899fe1
CRs-Fixed: 3123540
Update enhanced Tx stats from Tx HTT PPDU completion path in WKK.
Define and use function pointers for architecture specific
functionality.
Change-Id: I4ba443647dbd81c83e899c0f88c5d9a4cc695e14
CRs-Fixed: 3132255
Define macro for maximum mcs values for 11AX and 11BE.
Also move bandwidth enums to cdp header file.
Change-Id: Ic24b9fa459b160702fa35162955c6bcdf678c97f
CRs-Fixed: 3134964
Enable usage of delta_tsf for SAWF. This will be used to compute tx
delay. Also, add support to update sawf stats in tx completion.
Change-Id: Idab7fbd5217175167ecdeee21cf5dc9daf1415d6
CRs-Fixed: 3135773
