In case of STA + SAP, when STA connect to a new AP, the SAP
initiate channel switch to the new channel of the STA. During
this transition period DUT will be in MCC scenario and thus
firmware changes the TBTT of SAP to get 50% channel time.
Due to this peer STA connected to DUT-SAP may miss all 5
beacons containing CSA info and when it comes out of hw-dtim
mode after 5 beacon misses the DUT SAP has already moved to
new channel and thus as SAP is not on the old channel the peer
STA will receive Heart beat failure.
To avoid this Heart beat failure on peer STA, increases the
default value of channel switch count (g_sap_chanswitch_beacon_cnt)
to 10 to increase the probability of receiving beacons with
CSA info.
Change-Id: I2e5182c299f2a100c9919ffc123aa6b1290324f9
CRs-Fixed: 2227704
Add GRO support and make it configurable through INI(GROEnable).
GRO and LRO are mutually exclusive. Only one of them can be enabled.
And disable GRO during following conditions
1) Low TPUT scenario
2) Concurrency cases
3) For Rx packets when Peer is not connected
Change-Id: I15535827a03953231670d4138235c4876b16e045
CRs-Fixed: 2098772
INI item "gBmpsModListenInterval" is not used and hence remove
it from source code.
Change-Id: I32cae84a200541e9028667f16736ce5394bae4b7
CRs-Fixed: 2232887
Change ce_service_max_yield_time ini to us granularity to have
yield time of us order as well.
Change-Id: Ib9e421ad61b660194459c2ee44b2d36a07a21e61
CRs-fixed: 2086153
Add ini support to change ce service max rx indication flush num
to handle given number of rx indication at a time to maintain
napi yield timelines. This is used to tune the yield time based on
system needs.
Change-Id: Ib66f23c83d64f2bc16a352067816512c3d8defef
CRs-Fixed: 2068367
Add ini support to change ce service max yield time, so that we can
tune the napi SWI context of execution based on the system needs and
add a variable in napi stats to record max time taken in NAPI poll.
Change-Id: Id2b47bcecb777b98e0b1192135ae140b681d387d
CRs-Fixed: 2055074
Update the usage type of gTxAggSwRetryBE, gTxAggSwRetryBK,
gTxAggSwRetryVI, gTxAggSwRetryVO, gTxAggregationSizeBE,
gTxAggregationSizeBK, gTxAggregationSizeVI, gTxAggregationSizeVO
from external to internal.
Change-Id: Idd4c6d9f3c03fef9e3d3600871c20ad419bac6b0
CRs-Fixed: 2230035
Add ini "gEnableSecondaryRate" to Enable/Disable control
for Secondary Retry Feature Set.
It is a 32 bit value such that the various bits represents
different values.
Change-Id: I1348465932f32ee19cd3efb2347ca8d2f59e0904
CRs-Fixed: 2219933
Video/audio wireless application needs to tune parameters
per AC based. Config the number of TX sw retry per AC via
driver INI configuration file. It helps to improve the
video/audio performance in noisy environment.
Change-Id: Icffb5174b265b6453021b0d0a8ad3e12b695847a
CRs-Fixed: 2212954
Video/audio wireless application needs to tune parameters
per AC based. Configure A-MPDU subframe parameter per
AC via driver ini configuration file.
Change-Id: Id63be7aacf6465edee08f7a2f4c8a119f9bd6346
CRs-Fixed: 2212932
Function hdd_wlan_get_ibss_mac_addr_from_staid() is currently located
in wlan_hdd_wext.c, but this function is independent of wireless
extensions, so relocate it as part of the plan to omit wlan_hdd_wext.c
from the build when wireless extensions is not enabled.
Change-Id: If005f7c2295a519b891d3718799f6f826d59e97f
CRs-Fixed: 2229490
Currently wlan_hdd_wext.h defines some IE-related macros, but these
macros are independent of wireless extensions, so relocate them as
part of the plan to properly featurize wireless extensions.
Change-Id: I34b2b220087e946f662741fe549a980884b97842
CRs-Fixed: 2227954
Function wlan_hdd_set_mon_chan() is currently located in
wlan_hdd_wext.c, but this function is independent of wireless
extensions, so relocate it as part of the plan to omit wlan_hdd_wext.c
from the build when wireless extensions is not enabled.
Change-Id: I187305c1f01c7a3cb72f55a0ee885c4f4f0277aa
CRs-Fixed: 2227097
Add change to allow randomizing mac address used in STA mode RTT
ranging using ini param control.
Change-Id: Ief3814ef758476d2617d8176daade2128c2b250a
CRs-Fixed: 2205953
Currently there is no provision to decide delay between two roam
scans in firmware. With these new ini's, driver wants to expose
control to decide delay between roam scans:
Add ini "min_delay_btw_scans" to set minimum duration allowed between
two consecutive roam scans. Fw should not allow roam scan if duration
between two consecutive roam scan is less than min_delay_btw_scan.
Add ini "roam_trigger_reason_bitmask" to set default value of
bit-mask containing roam_trigger_reasons for which
min_delay_btw_scans constraints should be apply.
Change-Id: I2af9d5dc8e6919eeb90251d3d744e3f07705e776
CRs-Fixed: 2221779
Currently hdd_display_stats_help() is a public function exported by
wlan_hdd_wext.h. But this function is only used internally within
wlan_hdd_wext.c, so remove the public prototype and instead make the
function static.
Change-Id: Iaed10720f0f325794481bbb7ad9f743deb6b7b15
CRs-Fixed: 2227013
Add new ini item "enable_ftopen" to enable/disable FT open
feature. There is no ini currently to disable only FT open.
Change-Id: I18280d9de77857b15698eb233ba4ec71089beb06
CRs-Fixed: 2214766
The SoftAP VSTA feature was introduced to overcome a limitation in a
prior version of WLAN hardware. Since the WLAN hardware supported by
this driver does not have this limitation, remove the feature code.
Change-Id: I1f2fe31b294fb7b2da1fa8619b3380412c5d872e
CRs-Fixed: 2224817
The driver supports a "SSR injection" feature that is used during
testing to validate certain recovery features. Currently this feature
is protected by a generic WLAN_DEBUG feature flag, and in addition
there are two separate debug ioctl handlers which have duplicate
code. In order to better support a finer level of configurability
introduce a new configuration flag and consolidate to a single
implementation of the feature under that flag.
Change-Id: I73e8dd4580ca53d129ae0181ffc46d011699f3dc
CRs-Fixed: 2224815
Add new ini item "ho_delay_for_rx" to set delay Hand-off
period. For LFR 3.0 roaming scenario, once roam candidate
is found, firmware waits for minimum this much duration
to receive pending rx frames from current BSS before
switching to new channel for handoff to new AP.
Change-Id: Ided9a81e9402259f5df6b42926b3fa336b6bb4d0
CRs-Fixed: 2221748
Currently, Logic to reject concurrent ACS scan is present
in Hdd context and variables for this context is common for
both softaps(softap1 and softap2). Due to this in case of dual
band SAP mode, if an ACS scan is in progress for softap1 then
driver rejects any ACS scan on softap2, which is not acceptable.
Fix is to move logic to reject concurrent ACS scan from
hdd context to adapter context.
Change-Id: I9d2b437523ef6ac5794e7952ac6cd35d1c2f778b
CRs-Fixed: 2206499
Whenever hw_mode=any is set in hostapd.conf, BAND_ALL is sent to
HOST driver from hostapd. ICM module doesn't support BAND_ALL
and so HOST driver internally changes the band to BAND_2G or BAND_5G
based on acs_freq_band and update the channel list and ch_width
accordingly.
ICM module supports BAND_ALL now so don't do any optimization on
band in HOST driver.
Change-Id: Ia0b554f72ba0d5063ff622edbe1fa7113b984142
CRs-Fixed: 2224675
Currently non-linear, non-tso TX data is not handled correctly,
only the non-tso, single linear data is supported. the frag paged
data in skb is missed while packet length for HW access
is entire packet length, HW DMA failed.
temporarily to linearize skb so that non-linear data could be TX
correctly.
Change-Id: Ic0f2b7a0b021ca190c870551a66181f50ae72c65
CRs-Fixed: 2180318
Suspend/Resume unit test IOCTLs and other unit test features are only
enabled in defconfig debug builds and always disabled in production
builds. Add CFG INI item to disable these test IOCTLs even in defconfig
build such that by default on all build combinations unit test IOCTLs
are always disabled.
Change-Id: I71a63d2b85800b630d7c18eb77a3cffddcd66fbb
CRs-Fixed: 2221874
There is a chance that kernel can trigger suspend while
connection in progress. If driver allows this suspend, this can
result in fw panic.
Specific scenario:
If driver allows suspend to go when it waits for probe response,
fw least expects suspend indication as fw is in vdev start state.
This unexpected suspend indication in vdev start state can cause
fw panic.
Hold wakelock till the completion of association to fix this issue.
Change-Id: I168ead2ab1ef4fff1d9af3f3142c82536c3f4798
CRs-Fixed: 2217140
After SSR, FW clear its txrx connectivity stats.
In host, as adapter is intact, host connectivity
stats counts are still available. Now if the set
stats command is used again, then host increments
its counts start from its last saved value, i.e.,
count before SSR, and FW increments its count from 0.
This sends a mismatch of packet counts b/w
host and FW to framework that creates ambiquity.
To address the issue, reset the host counts so that after SSR
both FW and host start increment their counts from 0.
Change-Id: I11f849d6f00abe11f3bb8947cc81e47a3bc004fa
CRs-Fixed: 2202890
Issue is under AP-AP MCC config, mcc event is not sent from wlan
to IPA driver. mcc mode is decided with the help of connection
table. But for AP mode, mcc mode is checked and updated before
connection table is updated by adding the SAP vdev entry.
Fix is to make ipa mcc mode check and notification when connection
table is updated. Since block is not allowed when conn table is
updated, a new work_struct mcc_work is introduced.
Change-Id: I935222e26bb3f6b31685f52b75084b034daccad2
CRs-Fixed: 2075876
Currently hdd_set_peer_rate() is implemented in wlan_hdd_wext.c with a
prototype defined in wlan_hdd_wext.h. But the only client is located
in wlan_hdd_hostapd.c, and since that is where the "master mode"
ioctls are handled, relocate hdd_set_peer_rate() to wlan_hdd_hostapd.c
and make it static.
Change-Id: I5ec9c43b29fafc75cb35f1ee465c86acbc6b3b2c
CRs-Fixed: 2219456
Refactor the Green AP configuration so that it can be easily excluded
when the feature is not enabled, and to support transition to the
converged configuration model that is under development.
Change-Id: I275833f4c60c315937a6fba3f403eb54925e151c
CRs-Fixed: 2218656
Since camelCase is frowned upon in the Linux coding style, rename
field enableGreenAP in struct hdd_config.
Change-Id: Ie541289f79b2bfe9f2bf490bbcde7e0649e0395d
CRs-Fixed: 2218692
Refactor the hdd portion of the Green AP feature so that it can be
easily excluded when the feature is not enabled.
Change-Id: I986c5ab7640b3182a12bef93748affefba067251
CRs-Fixed: 2216247
Recent change in hdd_is_tx_allowed function causes failure in Tx of WAPI
Auth frames. Add check in this function to allow Tx of WAPI auth frames
so that device can connect to a WAPI AP.
Change-Id: Id5d4d31385309381383dec432698a8ac625845ad
CRs-Fixed: 2217090
Change the MIN, MAX and Default values of the ini
CFG_TX_SCH_DELAY_MIN to 0, 5 and 2 respectively.
Change-Id: I27d6110d69ba885535933e31dcca4e08865a7dc8
CRs-Fixed: 2216634
There is 1ms TX delay enabled in TX sch module if
frames queued in FW SW queue are less than 32.
This results in Tx delay in FW, and causes response time higher.
Add ini configuration to enable/disable Tx delay.
Change-Id: Ic180431ed2d0848df3dbb144f6b2bd70db61e5f4
CRs-Fixed: 2214307
Change the OCE WAN weightage to 2% of the scoring weightage and change
the slot size to 15 and fill the values for each slot in INI.
Change-Id: Ic67cde29a9dfdfaf6022bab106432ef2950e2340
CRs-Fixed: 2208283
Currently the HDD Green APIs do not have a consistent prefix. In
preparation for refactoring this feature, rename the HDD Green AP APIs
to have a consistent prefix.
Change-Id: Ib4d9a6db6ffacd9e19277d95f4976805d0bb6fa3
CRs-Fixed: 2216246
The AP auto shutoff feature controlled by INI item nAPAutoShutOff is
obsolete, so remove it.
Change-Id: I9e96bee36acc1ea1ac6f775ae04b31929bcb8406
CRs-Fixed: 2215925
Use in_compat_syscall() to query the syscall type, so it works properly
on all architectures. Also maintain backward compatibility with older
kernel.
Change-Id: Ife19c9874dcacc18c5d19c1175988bee66ea1cdd
CRs-Fixed: 2215566
Currently NUD events are used by Framework to detect
the Network Reachability. Framework issues disconnection
for NUD_FAILED event.
Now, NUD events are tracked within driver to detect the
reachability and based on TxRx traffic, driver takes decision
to issue disconnection.
Change-Id: I461610c220288ff1fd718bb7bc2dd8375588505c
CRs-Fixed: 2195796
Currently HDD defines function hdd_wlan_get_freq() which uses
it own static table to perform channel to frequency mapping. This
duplicates functionality provided by the converged regulatory
function wlan_reg_chan_to_freq(), so remove hdd_wlan_get_freq()
and update its only client to use wlan_reg_chan_to_freq().
Change-Id: I6fcb11b9b967ab77dcd7c8d0c1bc185ee3c18913
CRs-Fixed: 2215576
