Currently, the QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS
attribute is not present in the nla policy structure.
Change-Id: Ibbbd8bb7cf9cb3a814564cb9022795e34a5a11b0
CRs-Fixed: 2755706
If STA is on 5G channel, starting P2P GO on a different 5G DFS channel
should be rejected, but it's not, due to it didn't check the P2P GO
specific configurations, but only check the one for SAP.
To fix it, use P2P GO specific API to check the force scc status
for P2P GO mode.
CRs-Fixed: 2769182
Change-Id: Ibb3bb5e6e7f8a64e4483bdef863ce1f4294da9eb
If FW asserts before cfg80211 resume, cfg80211 resume will skip calling RTPM
put, which finally results a usage count mismatch. To fix it move RTPM put call
at the beginning of cfg80211 resume to make sure its always called and RTPM usage
count is in sync.
Change-Id: If0c9fbe094de16d103cd58ed4db3b08b76adb3cf
CRs-Fixed: 2728742
In wmi_fill_rso_start_scan_tlv(), the fixed param header is
overwritten with 0. So this causes roam scan mode command to
fail.
Don't overwrite scan start fixed param in
wmi_fill_rso_start_scan_tlv(). Also add some additional debugs.
Change-Id: I8ae7053e77d5694bade7e4a84fb4028d8224354c
CRs-Fixed: 2771951
Previous Logic:
Once a beacon report req is received, dut sta scans one channel
at a time & report immediately, then move to next channel.This
logic adds some additional delay as scan request and beacon
reporting will be done every channel.
New Logic:
Once a beacon report req is received, dut sta issue sta including
all the valid frequencies in the scan filter so that only single
scan req should be sent to FW.
After the scan is completed for all the channels, populate the
results so that it can be transmitted via beacon report.
Further, in sme_rrm_scan_request_callback, the logic to compute
valid_result was removed as even if RRM scan response is
received after roaming to different AP, the message shall be
posted to PE for rrm cleanup.
Change-Id: I48cb3106e35fb9a441a44a160a6ee6f75f64b81b
CRs-Fixed: 2770859
When NDI do hdd_ndp_peer_departed_handler() or hdd_stop_adapter(),
it will invoke hdd_cleanup_ndi() to pause NDI net_dev TX queue,
the NDI is in disconnection status, so only pause TX queue but not
set netif_carrier_off() will let kernel trigger TX watchdog
unexpectedly.
Use WLAN_STOP_ALL_NETIF_QUEUE_N_CARRIER instead of
WLAN_STOP_ALL_NETIF_QUEUE to set netif_carrier_off() then no
TX watchdog will be triggered.
Change-Id: Ic4a9954b383c34795bda70296f6af977f450bdfd
CRs-Fixed: 2765520
When __hdd_soc_remove is called from platform driver, for
removing the driver, request runtime sync resume before setting
unload_in_progress flag, such that runtime resume can happen.
Also, remove wlan_hdd_validate_context to skip unload_in_progress
flag check and have only SSR check during resume callback.
Change-Id: I545c6e10f9c18ff44c05a5d284aa9b82c7ec5ed5
CRs-Fixed: 2750981
3 ini:
roam_data_rssi_threshold_triggers
roam_data_rssi_threshold
rx_data_inactivity_time
If there's rx activity during latest rx_data_inactivity_time
and avg of data_rssi is better than roam_data_rssi_threshold, then
suppress roaming triggered by roam_data_rssi_threshold_triggers: low
RSSI or bg scan.
Change-Id: I5b41c4119e61392b50e52ab8ccb8650e5758f3b3
CRs-Fixed: 2768053
Don't send additional twt parameters in the vendor command if the
twt setup request failed in the firmware.
CRs-Fixed: 2767101
Change-Id: I318ecd9dfbaec85eec0c8dabbb640415da6631f1
sme_context structure uses union of TWT callback functions with
different signatures. This causes a cfi check failure. Remove the
union of callbacks and define them separately.
CRs-Fixed: 2763856
Change-Id: Ic40a572e363ea13f2defe29e25a16e15c5bff06e
In some case, the L2 header length is not exactly equal
to ETHERNET_HDR_LEN 14 bytes, actually it could be with
extra 4 bytes 802.1Q tag, so assume L2 header length just
14 bytes is not correctly in FISA aggregation.
Use L2 header length fetched from RX PKT TLV to handle FISA
correctly.
Change-Id: I254f5faa4548b74bf1a6d7a188c15b52b12711b8
CRs-Fixed: 2770284
Issue: Currently, host calculates he_caps based on assoc resp
he caps. In case assoc resp doesn't have he_caps host will
set peer mode vht and vdev mode he which may cause issue due
to different peer and vdev modes.
Fix: Consider beacon he params if he params not present in
assoc resp to keep vdev and he param same.
Change-Id: Id3df1eae85d30334d5d877c6ddd737989813f7c8
CRs-Fixed: 2769783
After the pre-CAC is done, SAP is switched to DFS channel. Post
this if a radar event is received, tx is blocked for the vdev
and channel switch to non-DFS channel is triggered. The
dfs_cac_block_tx flag is not reset on successful channel switch
to non-DFS channel causing packets received from network stack
to be dropped.
Fix is to reset dfs_cac_block_tx flag on receiving channel
switch response event.
Change-Id: I4e5fe0490d4c81b45c648a50c0b8508a7c11fa5a
CRs-Fixed: 2764008
Set default value of INI enable_subfee_vendor_vhtie to 1
to enable SU Bformee in vendor VHTIE by default.
Change-Id: I8a916495dd5c6ddfe78840dc6f35976fbdbbf8ba
CRs-Fixed: 2769257
1) In function hdd_process_genie(), there is a chance for
the 2 incoming parameters, encrypt_type and
mc_encrypt_type, not initialized due to an error
condition.
2) Remove some of the local variables that are not used
anymore in the following functions:
__wlan_hdd_cfg80211_del_station
hdd_features_init
hdd_cleanup_present_mode
hdd_update_regdb_offload_config
__wlan_hdd_cfg80211_scan
hdd_softap_stop_bss
Change-Id: If719b0fc4b09dc5fc88479a4a5ce327ebbc00168
CRs-Fixed: 2768860
Currently when next sta info get is done, the for loop updates
current sta info outside of the lock, which may lead to
undefined behavior.
To address above issue update the current stats info inside
the lock.
Change-Id: Idf33b9271379d34696f35c714bdf2d42446bd688
CRs-Fixed: 2755355
Variable roam_now in function csr_neighbor_roam_process_handoff_req()
is initialized as 0 and never be assigned a new value, so it will
always fall to csr_scan_for_ssid() when roaming happen with LFR2.0
enabled.
CERT case MBO-5.2.6 requires BTM reassociation happen within a short
time, otherwise AP will disassociate it and fails this case, it takes
more time if we do roaming scan after BTM response and roaming
candidate bss is ready.
When it is propagated from legacy branch, roam_now is a return value
from csrNeighborRoamProcessScanResults(), but after converged, this
function has no return value, and none zero roamable_ap_count can
indicate candidate ap is ready and we can roam now.
Change-Id: I5f2bd85abf0f7c1488ae729fc48332a92b4d133d
CRs-fixed: 2762476
This is a change for typo about LFR configuration. It uses ini -
"mawc_roam_ap_rssi_threshold", the correct is
"mawc_roam_rssi_high_adjust".
Change-Id: I7e29287b84559f58f13d191d6288534196b894da
CRs-Fixed: 2768752
The logging macros implicitly takes care of embedding function name
in the log, hence there is no need to include __func__ again.
Getting rid of redundant __func__ reduces driver memory footprint.
Change-Id: I878671f03be0727bca3bca5dfd82eae4e353c6e1
CRs-Fixed: 2768575
The logging macros implicitly takes care of embedding function name
in the log, hence there is no need to include __func__ again.
Getting rid of redundant __func__ reduces driver memory footprint.
Change-Id: Idf4685539991f65205f19b27551cef699230c82e
CRs-Fixed: 2768575
User requests station stats using QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO
command. Presently host request peer stats from FW when user request
station stats for STA mode. FW doesn't support peer stats for STA mode.
Hence clean up the code for get station vendor command for STA mode.
Change-Id: Ie815690edae543dbedbf73f13c4c157197efad87
CRs-Fixed: 2768301
Adds support for sme_abort_roaming for ROAM_OFFLOAD_V1.
Also fix compilation error for ROAM_OFFLOAD_V1.
Change-Id: I06247b1118b7dee32ff392b247e2e08e32dbaf9f
CRs-Fixed: 2768397
While querying for the channel width, the opclass is
extracted from the country opclass. If opclass is not
found then 20Mhz channel width is considered for connection.
This fails the cert test case when AP sends the global
opclass in ECSA.
Change is done to search in the global opclass if the
opclass is not found in the country specific opclass.
CRs-Fixed: 2768075
Change-Id: I24b585af7174a31fe800d6453bbfe18dc5f24af1
Currently line number is not useful in the logs and to print
the line number consumes lot of memory in driver text area size.
To reduce the driver size add feature flag to enable/disable
line number logging in the driver.
Change-Id: Ie11e3425cb61edad09c0da0337d0daa18e2a56d6
CRs-Fixed: 2766244
