Add a in_use flag to identify if a rx desc is associated
with a valid nbuf and use this flag while freeing the nbuf.
Change-Id: Iace002ecadfd95ce60b7d1eaebc42194a433963b
CRs-fixed: 2044907
Currently all Host collected DP statitics are synced to upper layers
on per-packet basis; This is causing significant CPU overhead.
Add a flag which can be controlled through iwpriv to enable/disable
updating of these statistics from DP to higher layers
Change-Id: I983c6d91803c83c1efd49c5535769a0c10fbc9b5
CRs-Fixed: 2064113
Enable qdf_assert on rx error path to detect corruption issues.
Also add a magic word in rx_desc and compare on rx indications
to detect any corruption issues early in the path
Change-Id: I4df1220f19c891928f9687f40de6f2118b530db2
CRs-Fixed: 2004658
This is a temporary WAR in host for multicast loopback check
until we finalize on exact design, and host or firmware will
take care of this
Change-Id: I4d2d1b0f5d2a78d4c8716740b74c4fee22c28e96
CRs-Fixed: 2039038
Modify the legacy LRO implementation to use the implementation
in QDF instead. This is to avoid code duplication and to unify
the LRO implementations for Napier and Helium.
CRs-Fixed: 2042812
Change-Id: I38e9da3b54392a1c5781133916361aac3875d43d
Move excessive per packet logging inside undefined compile flag.
Eventually need to remove this debug logging.
Change-Id: If1470a4c780b4b718346982a69d6e5fb60e2287f
CRs-Fixed: 2049401
Changes include
1. nss_cfg parameter to dp_soc.
2. nss_enabled field for pdev.
3. cdp api to enabled nss offload config.
4. skip rx ring configuration when nss enabled.
5. skip timter /interrupt configuration if
nss is enabled.
6. peer map/unmap event hander.
Change-Id: Ic4a919b6b7e846e18cb15ebcb94f8736a751ecb5
1.Add QDF_TRACE_STATS for datapath stats to remove
module prints.
2.Fix Stats indentation for better readability.
3.Add missing stats
a. Update Packets on Rx side on per-ring basis.
b. Add stats for features (TSO/SG/RAW/Mesh)
c. Add packet type count on Rx.
Change-Id: Ief1719b67330f729ff60703ec2be26bc5e4201e9
CRs-Fixed: 2034876
Perform software based smart mesh filtering on rx packets indicated
as error packets with invalid peer. All such packets from NAC
sent to umac through monitor interface.
Change-Id: I8e4b40f74088bb8820d6ab6681756835e400d4ef
CRs-Fixed: 2017269
Add ring_packets variable to collect packet count on rx
path. This stat variable is incremented on
per ring - per core basis.
Change-Id: If8b51a757b28c231a6444e6b7f2e336b8c0cdd8e
CRs-Fixed: 2035142
Add support to make WDS source port learning in lithium datapath
to be configurable.
Change-Id: I63eb64d6f46560a31f8e40a806d05d1dceddd784
CRs-Fixed: 2004658
Add support to extract LRO information provided by
the hardware and utilize the support provided by QDF to
perform LRO.
Change-Id: I00a26573a450e9c32586b3d5fb656dbfe802cfac
CRs-Fixed: 1107169
Add Invalid Peer stats on rx side
Add aggregation stats missing on Tx
API to update Rx Errors
Change-Id: Ib757ee7b89d9b9113e1a41b5a520faabb9ff28bb
CRs-Fixed: 1114641
Add API to handle NAWDS packets on tx side.
Add API to handle invalid peers and pass them to umac.
Change-Id: Ie8c2508e4f51c7d6969c9eb6439919c57dd427d4
CRs-Fixed: 2008205
Reduce DP poll interval to 10ms and change per-packet prints in Rx path to debug level.
Also fixed HAL macros used to setup Rx buffer descriptors.
Change-Id: I112393a3f021b275dbe9da9df9c1bac584a96f3f
CRs-Fixed: 2026389
This change is for supporting monitor mode VAP. All the monitor mode ring
is configured. The related monitor mode ring includes:
-monitor mode buffer ring
-monitor mode destination ring
-monitor mode status ring
-monitor mode link descriptor ring
The packet is not sent to monitor mode ring unless the monitor mode VAP is
configured. This release support Multiple VAP - AP/STA VAP plus Monitor
VAP configuration. The status ring is not used in this release. However,
the ring is tested and the ring is moving and there are TLV's in the ring.
Change-Id: I782ee0c3b998d8b3bbac79b5e7fdecdbff15fa93
CRs-Fixed: 2013049
Ampdu count is populated in pdev
but zeroed before printing. Fix it to
be populated in peer and aggregated
in pdev before printing
Change-Id: I51d8f1968a87c0b9dbf53928acd1bbef45acc7ec
CRs-Fixed: 2025785
pkts should be forwarded from one STA to another
STA belonging to same VAP from within the driver
Change-Id: I68eb0dd91f7ac54352b4882ffdb9d5d53d627db1
Conflicts:
dp/wifi3.0/dp_rx.c
dp/wifi3.0/dp_types.h
Conflicts:
dp/wifi3.0/dp_rx.c
Change-Id: I68eb0dd91f7ac54352b4882ffdb9d5d53d627db1
Setup all TID queues during rx peer init
Add support to handle ADDBA HTT msg
Allow pkts to be fwd to stack even if peer isn't found
Change-Id: Icdfec2eeaa3e0ca62202ed278cd63209b8f79cb2
CRs-Fixed: 2016138
Add command to set mapid for each VAP using:
iwpriv athX s_dscp_mapid N
Add command to change tid values in PDEV maps using:
iwpriv wifiX s_dscp_tid_map <MAP_ID> <TOS> <TID>
Change-Id: I510a40e71ecec5c453dd2dff1b13fd5ebedbe98a
CRs-Fixed: 1108452
Add per peer stats
Add support to update APSTATS
Change QDF_TRACE to DP_TRACE for improved readablility
Change-Id: I4be2adf2a1d7f978eb2961a544435d525c97923d
CRs-Fixed: 1114641
This change includes:
- Adding the hooks to send LRO and hash configuration to the firmware
- Configuring the REO remap registers
Change-Id: I6d83e2a2365647f2c7a6440bd1d4b42fa7df7eff
CRs-Fixed: 1094775
Added support to filter out received packets on mesh vap based on
rx filter setting.
Change-Id: Ibc541324d928a9d006531c8908f4792e0c7d854e
CRs-Fixed: 2003389
print complete RX TLVs in human readable format
when ever we encounter an error in RX path
Change-Id: I054556fd599db75b94eadb7647f4cd589cbfb700
CRs-Fixed: 2003183
Added suport to extract per packet rx stats from tlv headers and to send
them to upper layers in predfined format.
Change-Id: If8aea2038939162a11ab869b585a0b203a396d71
CRs-Fixed: 2003389
Add or update WDS peer entry whenever source address of the
received pkt does not match with the peer table entries.
Change-Id: I7798a5b795777451f534be7d25d5f9b930f5c305
CRs-Fixed: 1117405
API to handle pkts received on vdev which has RAW mode
enabled. Currently supports only MPDU with single MSDU.
Change-Id: Ife00699646bd97c5de0021fc32db434a544058f6
CRs-Fixed: 1111781
Add RX HAL APIs to retrieve the mcs, sgi & tid info
from the rx TLV headers and display them on per packet
basis.
Change-Id: Ic6ced3ad0728183437014c0e6c2a8afbdbead1c2
CRs-Fixed: 1101961
peer meta-data is copied across TLVs of individual MSDUs
of A-MSDU, This has to be saved and used till last msdu
of the MPDU.
Change-Id: Id30938eebd8f98716bf9625553aea2cd774104d0
CRs-Fixed: 2002766
We should always ensure memory allocation for rx nbufs
should always happen from phy address 0x50000000 and above
else drop the nbuf and try for a new nbuf.
Change-Id: I675a0f1289e04f720949ad9b6917bbb733270a78
CRs-Fixed: 2003174
- Ensure the head and tail pointers are reset after
processing the packets on each vdev
- Ensure the network buffer is null terminated when
processing the null queue
Change-Id: I7bfab46b7fc6054e782f7f1fc09dd56a58e46a4d
CRs-Fixed: 2001835
Add Tx completion status value to the logging
of Tx completions. In addition dump Rx meta-data
and first few bytes of Rx packet only on NAPIER
EMULATION platform. This is only to facilitate
faster debug from the logs, and will be disabled,
once we have more stability.
Change-Id: I69d9e2fd6ad32efe01b8e56f355db5ed6d4d2e70
CRs-Fixed: 1116939
Added a separate loop to dequeue the rx pkts and relinquish
REO and rx-Refill ring faster. Additionl rx processing is
moved to a different per vdev loop.
CRs-Fixed: 1098453
Change-Id: I43b1fa302cf7e7c77f6114ea491306c0b724e365
The MC BC packets cause a NULL REO queue descriptor exception,
and hence are directed to the ring that is configured to receive
this exception from REO. As of now, this error is directed to
WBM release ring. Add handling to pass these packets to stack
instead of dropping them, when received on the WBM release ring.
Note that, the final fix may be route these to REO exception ring
from which the driver may need to pass them to stack.
CRs-Fixed: 1098153
Change-Id: If544911e7882a9f5e7dbffa5ef705618e9fcbbda
Seperate the dp peer object allocation from setting the peer's
default routing and default rx tid queues.
This change is to address a race condition where the HTT peer map
message arrives before the peer object is created.
Change-Id: Ibb0671d29ffac41fd06bb8a88476f37120d99ccb
CRs-Fixed: 1089662
Add support for replenishing the rx buffers using the host to
firmware buffer ring.
This includes adding a flag QCA_HOST2FW_RXBUF_RING:
When QCA_HOST2FW_RXBUF_RING is enabled the host will do the following:
- Allocate the refill buffer ring (HTT_HOST1_TO_FW_RXBUF_RING) and
populate it with
rx buffers
- Send the refill buffer ring configuration to the firmware
- Allocate the rx DMA ring (HTT_RXDMA_HOST_BUF_RING), leave it empty.
- Send the rx DMA ring configuration to the firmware
When QCA_HOST2FW_RXBUF_RING is disabled, the host will do the following:
- Allocate the rx DMA ring (HTT_RXDMA_HOST_BUF_RING), and populate it with
rx buffers
- Send the rx DMA ring configuration to the firmware
CRs-Fixed: 1074199
Change-Id: Iec05a973cd9d628c742e3aaa16b8dabc7797625d
