Client can choose to run an encode session to acheive maximum
performance rather than maximum quality.
Add the handling to configure video core accordingly for the
configured video session.
Such configuration is only applicable for non-realtime session.
Change-Id: Ife290b377c844e5b1d3be93b2509c787f8e05c59
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Enable HFI_PROP_SECURE when secure session is enabled
in encoder. Same behaviour as Decoder.
Change-Id: I5edfe3d735fda8edea9e491ae17546945b4431a1
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
- To determine if session is admissible, check only the
decoder input width/height and encoder crop width/height.
- Update session MBPF Calculations.
- Amend work mode setting to consider decoder input width,
height and GOP size.
Change-Id: If4053c222de2a55ad5b85a8ab96c12c47b145aa3
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
- misc fix for setting frame qp, min qp, max qp.
- seperate LEVEL database entry for encoder and
decoder as max level supported by encoder is 6_0,
but decoder supports upto 6_2.
Change-Id: Ia0a0a717e73e55a8b6933421e3eb55c3831524b2
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Encoder supports downscale with scaling ratio upto 1/8 of width
and 1/8 of height. So added necessary scaling checks at streamon.
Change-Id: I3a29b43c79cf4e693ba2c0d9f98ec24410d50fbd
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Add strict check in msm_vidc_check_mbpf_supported() to
reject image session, if total image load exceeds 16K.
Added msm_vidc_print_insts_info() support to print all
running instance info, if new session is rejected due
to mbpf/mbps checks.
Change-Id: I98bab985fcf4f4d20c6f263c48e0c701ec86ab6f
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Decoder supports dynamic low latency. When client configures the
video session in low latency mode, driver would configure the
firmware such that HFI_CMD_SETTINGS_CHANGE is triggerred on
sync frame boundary.
Change-Id: Ie70eaaeb8ad420db926f0d99f77723476deee400
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
[1] Irrespective of layer encoding type P or B, always
caliberate gop size to have gop size multiple
of sub gop size.
[2] Do not cap enh layer count value to max 1 value when
cvp is disabled.
Change-Id: I10f602202ce007707c0fee76d9f847db70798754
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
min VBV delay value supported is changed from 100 to 200
in firmware. Pick up the change in driver.
Change-Id: I200bdd4c35aa463d64baee0fa2ca330dc1eb0ad2
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
[1] Added return type to strict_check() api and bail out if
strict_check fails.
[2] Fix all the failures with #1.
[3] Added WARN_ON() for strict_check failure.
[4] Ensured &core->lock is acquired before calling below api's.
- __write_register
- __write_register_masked
- __iface_cmdq_write_relaxed
- __suspend
- __resume
- venus_hfi_core_init
- venus_hfi_core_deinit.
Change-Id: I7f0a3ca6c2aec2758220c90bff9260367f10820b
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Add support to honor client enablement of csc custom
matrix and set csc coeff to video firmware.
Change-Id: I14d702eb7033541aa439bebe11df7fc4aa49ffdb
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Deprecate custom pipe setting and use the hfi setter
to configure it alongwith other configurations.
Change-Id: Iffbd25df89f43cf77c1fa85ffa97601a31998410
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Latency property is set to firmware during streamon output port,
if set as part of initial configuration by client.
During runtime, the property is set as and when configured by
client.
1. Make the latency property dynamic for decoder.
2. For encoder, the same gets set to firmware with regular
v4l2 set properties.
3. For decoder, set the property explicitly during streamon
output port.
Change-Id: I35990614b95e57f113ddacfc2272cad6ae0dde82
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Allow max 1 enh layers when cvp metadata is disabled for HB
layer type.
Change-Id: If6e33462e8be36a4ca1fb1f253875678b697c05a
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Added support for V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN_10_STILL_PICTURE.
It willbe used in 10bit image encoding usecases.
Change-Id: I14877547f1f4792eefb0ea6bcecf2643627c125a
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
- check total mbps is within range(including current session)
- check total mbpf is within range(including current session)
- image session:
- decode: Only non-secure allowed
- encode: check basic image_encode requirements
- wxh should be within allowed cap range
- only linear fmt
- input & output is 512 aligned
- only CQ bitrate mode
- GOP size should be zero
- b-frame count is zero
- timedelta based RC disabled
- still-pic profile for 8bit and main10 for 10bit
- interlace resolution should be less than (1920*1088)/256.
- reject odd input or output resolution
- output resolution is with in inst->cap [min, max] range.
- current session mbpf is less than inst->cap[MBPF].max
Change-Id: I81c46950a8ef5b64bf5ac94564613998b1079b52
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
Fix the issue where bitrate cap database value is
incorrectly updated to dynamically client set layer bitrate
value when layer bitarte is not set.
Change-Id: I0f66c056c8ea0d053f8347dd003b61193258687e
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
[1] Add support to adjust and set blur type and blur
resolution.
[2] Modify flip to not allow dynamic flip enablement
when external blur is enabled.
Change-Id: I730f452c143ba8c8e15402d1c1ec3a0617bd583c
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Modify cap values for below properties:
[1] VBV Dealy: default as 300, min as 100, and max as 300
[2] Peak bitrate: default as avg bitrate set by client.
Change-Id: Ic9533e8a40e789128e5baa975bf1a0355e373e08
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
add extra size for input meta buffer
when ROI metadata is enabled.
add dependency of rate control and
color format.
Change-Id: Icefd3f9e319d596f88090cee331417c0b2946180
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
- enable conditional compilation based on defconfig
- compile only needed files based target & vpu variant
- enabled stubs to avoid compilation issues, for all
target variant and vpu types
- add support for qcv(same lunch combo) for different
PT & VT chipsets.
Change-Id: Ic446349fd1532885d7a2e94895d807c62f1ab6e4
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
- subscribe for dpb list property in combined
mode on output port.
- copy dpb list property payload from fw to
static array.
- using this array, mark read_only list buffers
as non-reference if not part of array. if count
of such buffers is greater than output min count,
send to fw for release.
- once fw returns them, destroy these buffers.
- unmap stale output mappings due to lazy unmap feature.
- unify release internal functions into common function.
Change-Id: Id32f04efb19eecaff453cc4383ee8296a0246263
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Need to increase debug timeout incase more debug logs were
enabled. This is to avoid sync cmd timeout.
module_param_cb supports to register custom set/get callbacks.
So using this feature to increase various timeout values,
incase more logs were enabled.
Change-Id: I194c077c2ba00af2403d487a3dcfbb48f119b478
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Avoid adjusting, sanitizing, and setting mark and use ltr
controls to fw for input port static case.
Change-Id: I8ac7fd9537ff0c5ddce0ff0f4d0337cb19dd83d2
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
For max-qp, set_min_qp is called,
correct the same.
Change-Id: I2ff7d6557a033fa45343b131fd68cae1eaf6d796
Signed-off-by: Manikanta Kanamarlapudi <kmanikan@codeaurora.org>
- Account for V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY
ctrl value to decide HFI_PROP_DECODE_ORDER_OUTPUT property value.
- Set encoder run time properties on raw port
- Some logging changes.
Change-Id: I5eef81b484e81b69031854a3a8665de4be7f98f9
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Add support to deliver HFI_PROP_BUFFER_TAG via FTB metadata buffer
to receive HFI_PROP_DPB_TAG_LIST from fw via FBD metadata buffer.
Change-Id: Id9eeee26135379975f55923505d9c91905fa0b9e
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
- Allow HB layer encoding type
- fix dynamic setting of I Frame QP and Peak Bitrate.
This reverts commit 4ef2b8899d.
Change-Id: I4d63dd424c68d388709684c649ef492ce2489caa
Following changes are added with this:
1. Handle and adjust session priority.
2. Session addmission based on priority.
3. Power (clock and bus) scaling based on priority.
4. Handle s_parm influence on priority.
Change-Id: I12dec5fb03d733f07b0b0a24b4d74d1ccd4bf791
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
