Currently, the vdev connection status is checked by getting
the bss peer of that vdev, and if the bss peer is in associated
state then vdev connected status is sent as true. It can happen
vdev is present and bss peer is deleted after getting the bss peer
from vdev pointer. Then bss peer can not be dereferenced to get the
its status.
Instead remove all the duplicate api's tdls_is_vdev_connected,
pmo_core_is_vdev_connected, and wlan_vdev_is_connected with
wlan_vdev_is_up. wlan_vdev_is_up gives success status
if associated.
Change-Id: I863c3c0689f329870bd08c813813c16956135209
CRs-Fixed: 2424996
Legacy WNI CFG items are refactored into new CFG implementation.
PMO uses a wma callback which uses cfg_get API to get listen
interval. Listen interval is now part of the MLME component's
private object. Define API's to get this value and use it instead
of the callbacks.
Remove WMA callback implementation and use new API that gets
listen interval from MLME component.
Change-Id: I797001ea14cc654f9daee3ce297e1ad0c0a08f2a
CRs-Fixed: 2386725
By design, when APF is supported by target, RA filtering need
not be configured. Legacy code handled this by passing INI value
of RA rate limit value to WMA and intersecting it with APF
enabled flag. Change Iabb75b46fce64b2c4a7a303848d7cb6b4714253b
replaced this implementation by a single check in PMO. So remove
the WMA legacy code since it has no purpose now. Also remove
unused PMO prototypes pmo_update_ra_limit and
pmo_update_target_service.
Cleaunp the WMA code that intersects RA rate limit and APF
variables.
Change-Id: I870a1271a627d47242000f5e04068e628f567216
CRs-Fixed: 2379745
Change I47cce6123566b67d4aa0c56f1cf6738f4fdbf77d ("qcacmn: Initial
power manager offload skeleton") included a prototype for function
pmo_dump_wow_ptrn(), but not an implementation. Since subsequently
an implementation was never added, remove the unused prototype.
Change-Id: I4fda06ef5cabdbff069e542319a9d5296a0e932a
CRs-Fixed: 2380102
Fields nlo_in_progress and nlo_match_received in struct
pmo_vdev_priv_obj are unused, so remove them.
Change-Id: I4152e55e407628bbcc32118aa702770a401cfe3b
CRs-Fixed: 2379076
Update the PMO packet filter APIs to make sure the parameter names
in the prototypes match the ones in the implementations and in the
documentation.
Change-Id: I7fd924d17edb54c690e8ef5b85d4829a4a165edc
CRs-Fixed: 2379075
LPASS is driver specific feature which is controlled by INI item
and similarly NAN is also driver specific and not vdev specific
hence decouple PMO lpass and nan feature get APIs from vdev to
psoc.
Change-Id: I152f8b909cf85e412c2fa72a2e7147a1505e60e1
CRs-Fixed: 2361991
Currently if a vdev is destroyed, wow patterns are not
getting cleared for that vdev, so when a new vdev is
created, host tries to configure new wow patterns for
this new vdev but due to FW limitations on number of
wow patterns that can be maintained at FW, FW is not
able to act on this filter and will not maintain this
new wow filter.
To resolve this issue, clear the wow patterns for the
vdev before it gets destroyed.
Change-Id: Iae7ad8b683c95d8eaf11355bc0e36b91cece2202
CRs-Fixed: 2344337
Based on cfg component, define PMO configures and add APIs to get or
set configures.
Change-Id: I9b9ff1f8701168787985cbcb219361a3f63c787f
CRs-Fixed: 2322176
This change Removes legacy APIs to modify vdev state machine and
add use new API to get vdev state.
Change-Id: I48aa3744dafc6d13a43a14e48de821c7dadf3a37
CRs-Fixed: 2314730
Add debugfs entry to get offload info (mc addr list, arp, ns etc.,)
for STA interface.
Change-Id: I8bf4491929b5ef04ed5ce19f4b0030945f0eb0c0
CRs-Fixed: 2203786
Update driver to use NAN config params based converged CFG
component. Cleanup hdd config references to nan ini params.
Change-Id: I5af85d68ee53ad557e64523f7a1719e328536926
CRs-fixed: 2290360
Add per module logging macros without function/line info
to avoid adding function/line info where it is not required.
Change-Id: Id808fef623b82cec38fc31071ef384f3ff0c92da
CRs-Fixed: 2278874
Map all enter/exit log macros to enter/exit QDF TRACE macro
to provide option to compile out enter/exit logs if required.
Change-Id: I0c6cd633705e820fcfeb47e3f81a3522c9ef1974
CRs-Fixed: 2274850
Currently while going to suspend, dtim parameters are not
correctly getting configured. Some other parameters to config
like the inactivity timeout are completely skipped as well.
Cleanly port the setting of dtim and other parameters during
suspend and resume.
Change-Id: Ic41a8ace3f5650e53f2dcaa416bfe241b87aa88d
CRs-Fixed: 2248160
In implementation of Android Packet Filter, functions, variables,
definitions are named after BPF, which stands for Berkely Packet
Filter. The term was more appropriate for Link Layer packet
filters implemented in the Linux kernel, known as Linux Socket
Filters.
The term BPF is obsolete now, so rename it with the
appropriate acronym, APF.
Change-Id: I9e02edbc580ffb2c559c8e864f54d255fc2d51a3
CRs-Fixed: 2191530
PMO should not know about vdev data path handle, but
pmo_unpause_all_vdev() need it, so register a wma callback to retrieve
the vdev dp handle instead of keep a copy in pmo vdev private context.
Refine current code to retrieve vdev dp handle using a wma callback
Change-Id: I1f668fff633a5e5cdfc478e7f619e9600930b333
CRs-Fixed: 2227384
Add support for getting cfg integer from PMO. Register callbacks
during pe_open/close so that PMO can query CFG int values for
calculating parameters like listen interval etc.
Change-Id: I52d165586576e547e175ba276e6b7225db5b27e0
CRs-Fixed: 2252661
Current ucfg API's that disables wow events accept a u32 bitmap
variable. A pointer to that variable is passed to core API where
it assumes it as a u32 array of 4 bytes. This will lead to out of
bound memory access.
Change wow enable/disable API's to accept wow event type as the
parameter.
Change-Id: I220aaddfea62ab96f121014d0d65a1406988c946
CRs-Fixed: 2233108
wma_is_service_enabled can't get valid service bitmap if call in
hdd_update_pmo_config, use psoc_ctx->caps.unified_wow instead to check
pattern id per vdev and legacy d0 wow capability.
Change-Id: If7bf316f482c49253fc4b95b94e172727b27ffd1
CRs-Fixed: 2225847
Change Ie062ada403f8a31aebcde691396987ad9e5352b5 introduced level-
specific logging wrappers to support compiling out entire levels of
logging messages. Migrate the PMO logging wrappers to consumer these
new APIs instead of QDF_TRACE.
Change-Id: I3f46450e76cc6422a0877e95785bfd41e4c0af0c
CRs-Fixed: 2208536
In order to better align with the other PMO logging wrappers, and the
rest of the driver, rename the following macros:
* PMO_ENTER -> pmo_enter
* PMO_EXIT -> pmo_exit
Change-Id: I9186c1425f22c5a8d4fc98f048a9d487b6095797
CRs-Fixed: 2206650
In order to conserve firmware memory when various filtering features are
not in use, update the target configuration provided to firmware based
on the intersection of various filtering features and host
configuration.
Part 1
num_wow_filters = ARP/NS offload enabled ? 2 : 5
bpf_instruction_size - BPF enabled ? 0 (auto) : 0xffffffff
Part 2
num_packet_filter = Packet Filter enabled ? 12 : 0xffffffff
Change-Id: Ie8cb4ae44c83b115b249e22ebd7146278ed70612
CRs-Fixed: 2199297
Recent changes in Power Management and Offload (PMO) have removed the
need for a configurable maximum number of WoW filters. Remove the
following relevant fields:
* maxWoWFilters
* CFG_MAX_WOW_FILTERS_MAX
* WMA_STA_WOW_DEFAULT_PTRN_MAX
* max_wow_filters
* ol_ini_info
Change-Id: I99cc74731d6373258dc65473a8342bda0ab2786b
CRs-Fixed: 2199452
In order to conserve firmware memory when various filtering features are
not in use, update the target configuration provided to firmware based
on the intersection of various filtering features and host
configuration.
Part 1
num_wow_filters = ARP/NS offload enabled ? 2 : 5
bpf_instruction_size - BPF enabled ? 0 (auto) : 0xffffffff
Part 2 (pending firmware support)
pkt_filter_num = Packet Filter enabled ? 12 : 0 (disabled)
Change-Id: Ic6624ff04598b53d8321e4864618b12b9702780f
CRs-Fixed: 2196997
Building CLD3.2 with a performance configuration results in several
"potentially uninitialized" warnings. Initialize the relevant variables
to avoid the warnings.
Change-Id: If97b67d50ebe2b7465fd2cc5a6a44488e4cb25a7
CRs-Fixed: 2200294
Provide PMO-specific device capabilities to PMO. This allows PMO to do
intersections between configuration and device capabilities.
Change-Id: If0a199f9be466d16cef900a29b14b73a2a4e52d0
CRs-Fixed: 2197828
pmo_core_wow_enter(), pmo_core_wow_exit() and struct
pmo_wow_enter_params are all dead code. Remove them.
Change-Id: I254a0bad794ffc1170a2799918e1627a3e01e340
CRs-Fixed: 2199462
It is really common to want to update or read from the PMO private
context, but doing so requires several lines boilerplate code. Because
this boilerplate is in so many places, mistakes like using the wrong
lock operation, or forgetting to use locks at all, are a always a
danger. Add pmo_psoc_with_ctx() to address this deficiency, which
retrieves the private context pointer, locks on entry, and unlocks on
exit. Usage is like so:
struct pmo_psoc_prov_obj *psoc_ctx;
pmo_psoc_with_ctx(psoc, psoc_ctx) {
/* use psoc_ctx */
}
Which is equivalent to:
struct pmo_psoc_prov_obj *psoc_ctx;
psoc_ctx = pmo_psoc_get_priv(psoc);
qdf_spin_lock_bh(&psoc_ctx->lock);
/* use psoc_ctx */
qdf_spin_unlock_bh(&psoc_ctx->lock);
Change-Id: I6a3ccbfbfb57c589d44c7eae57e2ed8272dae3ee
CRs-Fixed: 2197722
Change "qcacmn: Rename enum tQDF_ADAPTER_MODE" (qca-wifi-host-cmn
Change-Id I20f1b6d1a0ab4b8fe6a85cefdff96a49e2f4652c) renamed enum
tQDF_ADAPTER_MODE to QDF_OPMODE. Update all references to use the
new name.
Change-Id: Ic6f663dac11a100f168b2626c7c0fbcaccbfca4f
CRs-Fixed: 2141065
Checkpatch reported multiple instances of block comments not aligning
on "*" so fix them.
Change-Id: I082f62f59fe16d84ba013adbbfcd2e9bf1985e3c
CRs-Fixed: 2122901
The Wow pattern id should be identified unique for different vdevs of
legacy firmware, and latest firmware accept same Wow pattern id on
different vdevs.
This change is to differentiate this behavior using
WMI_SERVICE_UNIFIED_WOW_CAPABILITY flag, and supply a set of APIs to
manipulate pattern id.
Change-Id: I5fe7623a309a0c3baa14fb7312107c057e994462
CRs-Fixed: 2103017
Info level logs are logged on console, hence change PMO logs in
wlan_pmo_suspend_resume.h to debug log level to avoid excessive
console logging.
Change-Id: I77edb26ce3eb61573bba830787fe0ffb32eb6281
CRs-Fixed: 2116321
Currently, a hard-coded enhanced multicast filter configuration is being
sent to firmware. Instead, create a set of enable/disable APIs, and
configure enhanced multicast filter based on advertised firmware
capability.
Change-Id: I488b4a921612e1081266be8831be098d755375f9
CRs-Fixed: 2078615
