Add command support to not send ADDBA REQs.
The corresponding WMI VDEV param ID to set the
VDEV param has been added.
Change-Id: Id53f8101a61ccc0aba2a9a6735d1c6942ba3592d
CRs-fixed: 2188560
Under low memory conditions skb allocation sleeps
and results in kernel work queue watchdog.
Increase the wmi timeout to check if the system
recovers to allocate the SKB.
Change-Id: Ie4e42fdc71703c687ba2e5a4d995481ea7931c97
CRs-Fixed: 2158198
Add support to send the per chain rssi to upper layer
for each beacon and probe responses.
Change-Id: Ife6cb9e8e65591baf485c54a985f84d842400321
CRs-Fixed: 2177638
Firmware will use this configuration to enable/disable the
CCK transmission. By default, the CCK Tx is enabled.
CRs-Fixed: 2191524
Change-Id: I165c3ea10ea3734fc81e7d25fe8ad676afd1b2c1
Added extender service support for obss and obss color
Collision offload support.
Change-Id: Ifd249b3bbf4510297f15beb33df13d6c4f9d7d0e
CRs-Fixed: 2185238
Current Spectral module uses qdf_print. To improve the control over
logging, use module level logging
CRs-Fixed: 2165341
Change-Id: I205991347453c4dcc424ba1958e309b7c5fb71a0
As part of converged architecture wmi_service_enable is converged
and should be used instead of WMI_IS_SERVICE_AVAILABLE. The events
also need to be defined as part of array for mapping to converged
event id's.
Change-Id: I9ab342a5cf6e665a3eb90eeef6d10bf3c145049d
CRs-Fixed: 2186338
Change WMI initialization sequence to support WMI modularization.
TLV and Non-TLV modules calls WMI module registration based on target type.
WMI attach will call respective attach routines based on registration.
Change-Id: Id56446f491d129758537913d2d5d6633f8dec918
CRs-Fixed: 2179854
Remove dependency on WMA layer for green AP component by registering
green AP events through target_if layer.
Change-Id: I8fe9079c6ba6b23cd5f1d98a7d1b333fde31f19b
CRs-Fixed: 2178143
command:-
1. "iwpriv athx s_txpow param1 param2"
2. "iwpriv athx g_txpow param1"
param1 = frame_type<<8+frame_subtype param2 is power_value
if subtype == 0xff means set all subtype of that frame type
Change-Id: I8c68e1ca6a5829a3f0cf01b2c32c3332e1010243
CRs-Fixed: 2175241
Increase the maximum value of unit test arguments to 100 to include
support DL OFDMA RU allocations for testing / debug.
Change-Id: I33ed8d53931e33cc00069653ea38b543339203c0
CRs-Fixed: 2175616
In extract_ndp_confirm_tlv & extract_ndp_ind_tlv, ndp_cfg len &
num_ndp_app_info is from fw. If they are greater than the actual
length of buffer sent in FW, OOB access and info leak would occur.
Add sanity checks for ndp_cfg_len and num_npd_app_info with the
actual length of the buffer from TLV header in functions
extract_ndp_confirm_tlv & extract_ndp_ind_tlv to prevent OOB access.
Change-Id: I9ecf55a3606036d3e1f0916c948c4360475965fa
CRs-Fixed: 2176968
WMI service handle is not attached for all Pdev with recent
WMI changes. Fix host panic due to missing WMI service handles
for all Pdev.
Change-Id: Ic6107120ea4a49e49b86ebbfe385e440de3f49a9
Add a faked WMI layer for OCB unit test on platform does not
support OCB feature.
CRs-Fixed: 2177563
Change-Id: I35b272faa21f3b225eb036c06a15b06ab4b389ae
The pulse_delta_peak of chirp radar is not zero, which is one more radar
detection rule for ETSI chirp. Driver need delta peak related information
from FW for ETSI chirp radar detection.
Two more fields pulse_delta_peak and pulse_delta_diff are added in
wmi_dfs_radar_event_fixed_param.
Change-Id: Ief8dbea1c1336f45a24195853d5e1356bf3cad27
CRs-Fixed: 2179933
Currently WMI handler for WMI_PHYERR_EVENTID is used to handle DFS and
spectral scan phy errors; but Rome FW still uses WMI_PHYERR_EVENTID
and WMI_DFS_RADAR_EVENTID and does not have spectral scan phy errors.
Restore WMI_PHYERR_EVENTID and WMI_DFS_RADAR_EVENTID as Rome FW
requirement.
Change-Id: I23ca4ff6c9be0ba6a0f21f0e0ef9161b1942f629
CRs-Fixed: 2160431
Add WMI support for enabling/disabling the FW scheduler APIs and stats
per peer for MU and OFDMA
Change-Id: I185ca6ff5b564fc9b83007fd4e37da82b5c9976e
CRs-Fixed: 2169179
removing Length check temporarily
as existing length check is not applicable for HK.
In HK, CTL bin file size for 5G is 26556 bytes and
for 2G is 5852 bytes. 1.7K is the maximum payload size supported by TLV.
To support, we add header info: seq, endflag, total_len
before each chunks. Total bin files are transferred
as multiple chunks with header info on the top.
Change-Id: I7aedf85d6ee66a99cb4b6dca464dbe02caec371b
Add WMI support to set SU and MU TX beamforming sounding interval on
host driver in addition to enabling/disabling the above ability.
Change-Id: Ic3ea109e47c0df13db2c919bbcdf5fc7d6164698
CRs-Fixed: 2169176
Add min, max, reg max, antenna gain and max tx power to channel
field of WMI command for scan, vdev start. Max tx power is set
to reg max power. It is set to TPC on IE for MCL STA case.
Change-Id: I416b94f68a9c5db925a9ef8c731350ba27caa7a1
With gcc 5+ utilized for driver building, more coding errors are
detected, some of which are valid issues.
Fix all those errors in one shot.
Change-Id: I263c70d4bff9ec0c3076103001cd7f2ccc8e0d1a
CRs-Fixed: 2176076
Added a WMI command to add and del peer from the list
of non associated clients for which the RSSI stats
need to be populated
Also added event handler to extract the rssi stats
from the WMI event
Change-Id: I9880c74798c13a52e1498b81735ad78f86fa41b8
CRs-Fixed: 2148773
wmi_mgmt_cmd_record is used to add WMI mgmt cmd record. But mgmt
cmd tx comp record is missing due to mismatch of is_management_record.
Fix is to change is_management_record WMI cmd id to match those who
call wmi_mgmt_cmd_record. In wmi_unified_cmd_send, mgmt cmd record
add is no longer needed since already added in wmi_mgmt_cmd_record.
Change-Id: I41daf428ac0848dabaf4d87e3ecb7dca5e1c2774
CRs-Fixed: 2168104
Recently change "qcacmn: Add SAR power limit configuration"
(Change-Id: I0a214a2af780e9dd8c381c4e9eaa7d8cab6ef853) added the
ability to dynamically configure Specific Absorption Rate (SAR) power
limits. Now add the ability to retrieve the current active power
limits.
Change-Id: I7a6071dee71300daa3a217780ff3523604a11795
CRs-Fixed: 2161451
Support to send WMI_ADDBA_CLEAR_RESP_CMDID in tlv format is
lacking in HK. Add the necessary support.
Change-Id: Ic5bda1cd69531ce7eb6f61751b12626b788c02a1
CRs-fixed: 2174262
Add new WMI EVENT, SW FILS Discovery Alert Event, to get
firmware trigger to transmit FILS Discovery Frames.
Add WMI command to send FD frame buffer to firwmare.
Add WMI command to set FD period interval in mili seconds.
Change-Id: I8cb6279ec4431b9236bd32c548228a0dc6598664
CRs-Fixed: 2118098
HK needs support for sendaddba/senddelba cmds. These commands
need to be sent to the FW in tlv format. Make the necessary
changes.
Change-Id: Ia069a05dbbd710393ecab31c5bd2c1bcf28d0e1e
CRs-fixed: 2171669
Add ini to configure BTM offload configuration
which is sent to firmware as part of RSO start
via wmi btm config cmd.
Change-Id: I69c792705b208014af8f1878f7645d957dde6c06
CRs-Fixed: 2105112
After driver init, if not interface is created and the stop modules
gets called, the wmi debugfs dir is removed. After this it is not
created again during start modules. Due to this the wmi debugfs will
be unavailable after this.
Fix the wmi debugfs entry creation when interface creation timeout
happens after driver init.
CRs-Fixed: 2164039
Change-Id: Ib1a9c655b5144b11d506a09268918b63f82adcc0
The wmi data buffer offset passed to record command and event
buffer uses different offset and type for command and event.
Change the recorded wmi data buffer type to uin8_t pointer
for both, wmi command and wmi event record.
CRs-Fixed: 2164395
Change-Id: Ie759248a6a32632dd93f751a856a0588d9a11c25
DISA feature has been moved to a CLD component under the converged
driver model. Point the wmi API's and structures to the newly defined
files. Define new API's to extract parameters from event buffer.
Change-Id: Ia47d3682217e7ce9c021bb2db8319483c881b3b2
CRs-Fixed: 2161963
Add Objmgr ID and related definitions to support the newly
defined DISA component in CLD.
Change-Id: Ibbe5db39c01dae94cad5af5f4dccd2611c5b06d4
CRs-Fixed: 2159599
Refactor NAN target_if to make it wmi-type agnostic. Specifically
do not access wmi structures in NAN target_if. All the access to
wmi structures should happen in tlv and non-tlv specific wmi files.
Change-Id: I944b678fc501723d7cd26c9b21c4cc6ddb7fda4e
CRs-Fixed: 2159876
fwhdr_abstrct: Use Host based TARGET_TYPE instead of firmware
defined TARGET_TYPE. It will abstract dependency on bmi_msg.h.
Change-Id: I76d744db27df730a3a91a243adfc07fc17d77487
CRs-Fixed: 2140921
Invalid memory accessed in WMI_REQUEST_STATS_CMD, and it
causes kernel panic in the system.
Fix the invalid memory access in WMI request
stats function.
Change-Id: Id838569fd5667b118aecc03f7af5e5f9f146b2a6
CRs-Fixed: 2162279
For big endian based offload radios, the key installed using
WMI_VDEV_INSTALL_KEY_CMDID requires to be code swapped as the
copy engine for big endian platform does byte swap operation
on the received key before sending it down to FW.
The big endian conversion is carried out
in ol_if_vap.c for big endian platform specific radios.
However, it is observed that an additional copy
is carried out in the WMI layer that is overwriting
the converted key with old key, in the non-swapped form.
Hence move the big endian operation to the WMI layer to
ensure uniform functioning of the API
Change-Id: I9ee16572d08045b0f55b0de190efba5c6806031c
CRs-Fixed: 2161682
