Remove the dependency on dedicated config flag for the
use of new API versions in ASM and ADM open commands.
Dependency is now on ADSP service version only.
Change-Id: I2e7bcec675bafb9ad9e2a10df4ccc1e52bb72c92
Signed-off-by: Dieter Luecking <dieterl@codeaurora.org>
Hard coded stream id fails rtac call for subsequential gapless stream
which uses stream id other than default value. To get/set rtac for
gapless session successfully, we need to update the stream_id as a part
of asm apr header with correct value populated from asm session table.
Change-Id: If4afd73b4cf11bf91730a58ae6dff03efb04519d
Signed-off-by: Weiyin Jiang <wjiang@codeaurora.org>
Add support for LPASS Audio HW vote needed for low power AMIC
VA usecase.
Change-Id: If6642d418dbf2cc9773fbd0ec0fe35c30afac140
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Add support for virtualized ION frontend driver for audio.
Virtualized ION driver currently is designed to extract
physical memory through hypervisor abstracted ion layer,
which can be shared between APPS and ADSP directly.
Change-Id: I3c664ec3c3a99ce092da6ee103a3b2de4073664f
Signed-off-by: Timothy Sham <tsham@codeaurora.org>
A new module called DAM is introduced to achieve common shared
memory for SVA use cases in LPI. Add new mixer control interface
to provide support for STHAL to configure the data that LSM gets
from AFE to be either processed or unprocessed.
Change-Id: I8556413257c6a2aee4739bcd89ffd130805af0c5
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Extend the encoder configuration to support aptx
adaptive R2.
Change-Id: I17d7adb62539d9f59222fd0c992424ba98395383
Signed-off-by: Zhou Song <zhous@codeaurora.org>
Add MI2S/TDM AFE senary port IDs for Kona target.
Change-Id: I8dafa4516c31040aad0bca30cfdc9acbdf460bf1
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Add check for mfc channel count before issuing mfc
media format command.
Change-Id: I0541d6651ecfcc90562ec0d9a632d039e34658cf
Signed-off-by: Dhananjay Kumar <dhakumar@codeaurora.org>
Add mixer control to configure multi channel map for
each backend separately.
Change-Id: Ie114fa38ee5ce47841cda4cd7f31349905f5c2c7
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Add multi channel map support per afe port.
Change-Id: Ib032d1c81d918417f516131f11c500e4f6668b39
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Add support for incall stereo capture for voice uplink
and downlink capture
Change-Id: Id23448990170b8215f547073608cd6a998d479ae
Signed-off-by: Arun Mirpuri <amirpuri@codeaurora.org>
IID support is set from user space during boot up
which can come in parallel with AFE set clock requests
due to which param payload is set in difference with
the actual set param command as per instance id support.
Change-Id: I07e45fda0943cac814f25c16da930dfae5d209a6
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Add support for speech codec which is similar to a2dp aptx adaptive.
Change-Id: Ibfbcf086f009fdb561e26aaf92cefc92f1bd16ca
Signed-off-by: Zhou Song <zhous@codeaurora.org>
Updates to send VAD enable or disable to AFE port.
Send VAD and island configuration based on the ports
on which these features are supported in Vipertooth
machine.
Change-Id: Ib3e6d46fed3bf9e822f350c9ec0dc629cd82547e
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Support group tdm multi lane configuration for TDM interface.
With valid lane mask tdm interface support delivery audio channels
through different data lines.
Change-Id: I63e8ba1106b89c6bcaca0a8359a1def696c334ad
Signed-off-by: Cong Tang <congt@codeaurora.org>
Payload size validity is not checked before using it in array index.
Check payload size to avoid out-of-boundary memory.
Change-Id: Ic0b06bb331fc1753ff7543bb218ab12d6a4a3ca8
Signed-off-by: Kunlei Zhang <kunleiz@codeaurora.org>
Trigger xt logging getparam at every playback close
and store data. When app queries sys/class node, return
stored values and reset to 0 for some params as per
app requirement.
Change-Id: Ice1a3e9a7e03062390f1c36184a971635e55d450
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Implement get param for AFE_PARAM_ID_SP_RX_TMAX_XMAX_LOGGING
in order to get excursion params from DSP.
Change-Id: I5129938c51c6f6ede9d4703d13be60d04d26f5e3
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
With speaker protection in v-validation mode, speaker
samples can be tested in early factory mode. Add
support for v-validation feature from driver.
Change-Id: I92493d6d2784cf4dd58021746bffe01180f89d23
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add support to process ec at channel count other than the
playback channel count by providing ability to set downmixed
channel count and downmixing weights to be used to downmix
ec ref data obtained from playback path.
These configs would be used to explicitly configure MFC module
present in ec ref path, for usecases where ec processing cannot
be done at playback channel count due to algorithmic or resource
limitations.
Change-Id: Iaa80a0f0da3697c55751b2201578252d6466d3b5
Signed-off-by: Dhananjay Kumar <dhakumar@codeaurora.org>
When ADSP is in power collapse or island state, it would fail
to access LPASS codec register.Vote for LPASS core to avoid
LPASS power collapse with pmruntime approach while accessing
LPASS registers & TLMM.
Change-Id: I74d037e499fb6f1245b9a1bd1b0a77200608c27b
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Handle media format update events from ADSP in case of DSP loopback.
Change-Id: I4004759cc77a05f46106d359417f97f0326af19d
Signed-off-by: Ralf Herz <rherz@codeaurora.org>
Allow to mark entries in a channel map as unused to prevent mixing other
channels in that slot.
Change-Id: I06f7de932dec4d30b2d6cfe04460d07ddad89049
Signed-off-by: Ralf Herz <rherz@codeaurora.org>
Add support for Aptx Adaptive decoder. Introduce flag
to indicate ABR feedback decoder configuration to
differentiate from regular decoder configuration.
Change-Id: I272e0a9572a56e878f7ad1385514b3be7010145a
Signed-off-by: Chaithanya Krishna Bacharaju <chaithan@codeaurora.org>
FLUENCE_EF module in COPreP topology doesn't support
44.1Khz sample rate. Set sample rate to 16Khz for
VPM_TX_DM_FLUENCE_EF_COPP_TOPOLOGY, which contains
FLUENCE_EF module.
Change-Id: I527da1a70cacba1014b2a706216172d12066b909
Signed-off-by: kunleiz <kunleiz@codeaurora.org>
Add voice MHI driver to support the following features -
1. Allocate and map mailbox memory needed for voice call
packet exchange.
2. Send memory mapped addresses to ADSP.
3. Vote MHI host driver at start and stop of a voice call.
Change-Id: I8ef8bc270acacab9b80bca7addccdf73bd572adf
Signed-off-by: Vikram Panduranga <vpandura@codeaurora.org>
Add a new API for mapping DMA resources
that needs to be attached to existing
SMMU SID.
Change-Id: I7a513d24ea30a5ead318e856e4c5317743fd0021
Signed-off-by: Vikram Panduranga <vpandura@codeaurora.org>
Enhance Channel Mixer control for MultiMedia Frontends to
get custom channel mixer coefficients from userspace and
use it during device routings to control stream to device
channel mappings.
Change-Id: Ifedac25de5ae6bad1092b66ec405bba66a80f608
Signed-off-by: Cong Tang <congt@codeaurora.org>
Signed-off-by: Dhananjay Kumar <dhakumar@codeaurora.org>
VA macro on Kona has three TX codec DMA interface. The
current AFE driver only supports two codec DMA interface.
Add support to enable the third one in AFE driver.
Change-Id: Ie0f6241ef37bc03ad9adb1c4fe82f82468caec25
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
VA macro in Kona has three DMA TX ports. Add a new VA
DMA TX CPU DAI in the DSP DAI driver to use it on Kona.
Change-Id: Ic144dbed1bd63af6f0150f854fdb74d57e156839
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
BT sink devices have a limitation on the packet sizes
they can receive and handle from BT sources. AAC encoder
can produce output frames which can vary in size based on
content being encoded. If frame size exceeds MTU size of
BT sink device, it will lead to incorrect decoding of
frames in BT sink.
Add a frame configuration parameter (MTU/Peak bitrate)
for AAC encoder to solve this problem.
Change-Id: Ia7795049e982400b0b3657b0b3a8990fc6920e38
Signed-off-by: Aniket Kumar Lata <alata@codeaurora.org>
- AFE_LOOPBACK_TX BE is the dummy backend created to
establish the EC reference capture path. While
opening COPP pass playback port id instead of
AFE_LOOPBACK_TX to get reference stream data from
AFE RX port.
- Add session type support in creating new COPP and
while checking for existing COPP.
CRs-Fixed: 2080421
Change-Id: I979f3ce1009cc18ff14130bebb8bd51a78fbe5ac
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
