DP peer changes required for multi-chip MLO.
This change includes
1) Adding MLO peer to global peer hash at ML context
2) Add ML peer to all partner chips id to objtable
Change-Id: I230a6c1b14484c587b190a9a318fe9ffb1caea11
Changes needed for MLO soc attach to pass chip_id,
dp_ml_context from upper layer.
This change also takes care of assigning appropriate
RBM id for IDLE link descriptors based on chip_id.
Change-Id: I8f5f08c524d91942e6e458f048700b7bdd900107
Changes to have HW cookie conversion context per
desc pool.
This context will be used to program CMEM of the
other SOC in case multi-chip MLO.
Change-Id: I5ec68813e8fcb6d124698a52f5553acf9a7b1795
For DA MC/BC RX frame, host should not use da_idx to access soc->ast_table
as this da_idx is not valid, OB accessing might happen.
Change-Id: I5c78d869e32536effe2635e561cb6881cdc97c38
CRs-Fixed: 3072841
Currently, to set checksum enable flags in Tx descriptor
we are checking the csum_enabled flag along with stack checksum
offload request. In case of roaming from latency-critical connection
to non-latency critical connection we request stack to calculate
checksum and set csum_enabled flag to 0. For some packets which
are already queued where the stack has not calculated checksum and
csum_enabled flag is set to 0, we will not set the checksum enable
flags in Tx descriptors for those packets.
To fix the issue remove the csum_enabled flag check and directly
check if the stack has calculated checksum for those packets or not.
Change-Id: I8d7754afc3d0a33315b85b0113cd3062e5783e28
CRs-Fixed: 3070858
For T-put test case, if near_full IRQ is fired, ring_near_full
flag will be set and host will always reap reo2sw ring as much
as possible, but if quota 0, this will lead to dead loop
in dp_rx_process_be.
stop reaping reo2sw ring if quota is 0 even ring_near_full is set.
Change-Id: Ifea885162be3ccc6ae0515fc3c2538c459372887
CRs-Fixed: 3067231
Avoid using ast_entry in intra_bss handling, instead use
da_peer_id directly from the msdu_metadata
Change-Id: Ic586f297e8e393504d7d399cff7a67c3035aa11f
sw_exception bit will be marked in reo dest ring descriptor for
FW re-injected frame, get this bit and save it in skb->cb,
this bit value can be used for FISA further check.
there is no reo_dest_indication field in reo dest ring on beryllium,
so share same cb member for sw_exception and reo_dest_indication.
Change-Id: I2321121be7dda68ed19faca177d868c7e8ba1dbf
CRs-Fixed: 3056156
Take care of the MLO peer bit indication to be
concatenated with peer_id to access the peer map
object.
Change-Id: Ia603a728101e83829a8906d1b847f42389e78ca6
CRs-Fixed: 3039326
This change includes below
1) Changes needed to increase Tx rings to 4
2) Use WBM2SW4 ring for rx error in QCN9224
3) memset srng at alloc to avoid populating RBM_id
in per packet path and enable implicit RBM
Change-Id: Icbd5ac2378273b8f3c6adc41c611e29551fff22f
Currently the IRQ mask for tx completion near full
interrupt is not in sync with the tx completion rings
which are enabled for WCN7850.
Fix the mask for tx completion near full interrupt.
Change-Id: I1432191b260094060873406d48e04fde5b7bc35e
CRs-Fixed: 3052650
- New data structures are added for BE monitor support
- dp_mon_soc_be - to maintain soc level BE specific fields
- dp_mon_pdev_be - to maintain pdev BE specific fields
- dp_mon_desc_pool - to maintain descriptor pool
- Monitor ops are updated for 2.0 and corresponding dummy APIs
are added.
- dp_mon_filter_srng_type is enhanced for TxMON
Change-Id: I12a2fbc53e4eecc7a191b7aa925431298d0a9f54
CRs-Fixed: 2991276
The multicast echo check feature is moved to hardware in
Beryllium. Enable this hardware feature and also disable
the MEC handing code for Beryllium in the host.
Change-Id: I86d319963191f3ed77aba16dcccbc659906edd9f
wds in Beryllium is managed by hardware.
Make use of hardware managedwds and disable
the corresponding wds handling done in host
for Beryllium.
Change-Id: I39f23cb40c6c5f85ada8ce59c92ff2855bb18da3
In Beryllium the HW does the ast lookup and match
and sets the intra-bss bit in the msdu_desc_info
structure of reo_destination ring and WBM Rx release ring.
So, change the Beryllium code to make use of this
hardware assistance for intra-bss.
Change-Id: Ic7c89efc741fefe35603082309204fbe3c9a97c7
For STA mode when index based search is used ADDR_X
flag need to be disabled. This is needed to generate
HW mec notify events to FW
Change-Id: Ib074c474f6e06accf09adeb53b3a1f85e30d4076
Currently, rx packet capture events processing happens even
when feature is disabled by ini. This incurs per packet overhead
in rx path.
The fix is to move all the processing from rx path to packet capture mode
component. Send only wdi event from rx path, when feature is enabled by
ini.
Change-Id: I647256b85117cd3373950c78a5a0ae7d6710e4e2
CRs-Fixed: 2969123
FW has some usecases when it needs to enqueue frames into hardware. In
BE WLAN chips, some hardware TX desc fields are moved into Tx
banks, hence a TX bank is also needed to queue to HW.
Dedicate a bank for FW usage.
Change-Id: I1f19f0ef85aff4c7592b0f07de4631259da743a6
CRs-Fixed: 3016828
Below are the changes in HW headers for E1.5
1) WBM2SW release source enum changed back to lithium values
2) DSCP to tid table num is added in Bank register
3) MCAST ctrl value is moved from Bank to seperate register
Change-Id: I342c451d792b1618dcb62ca9d4c77dcf4d4beeac
Disable CP Stats for Beryllium emulation environment. These stats are
invoked heavily by userspace and need to be retrieved from the FW.The
userpace is holding the rtnl_lock while invoking these stats. This
prevents any additional commands to be sent while a stats command is
pending. Since in emulation environment, the turnaround time is quite
high, no iwpriv/ifconfig/iw command can be sent while the CP stats are
pending, making the driver in accessible from command line.
Hence, disable CP stats by simply returning 0 to the caller in emulation
environment.
CRs-Fixed: 2984362
Change-Id: I80aee6ce2bed1c37b964dd5e7194a66287301355
The following configurations are changed
- Change numer of WBM2SWRELEASE rings from 7 to 8
- Use configurable RBM value when enqueuing packets for TX. This is needed
since WBM release ring numbers do not have an easy mapping to RBM values
for HMT1.0.
Change-Id: Idcf9e48e00b7039331fc1837bb1e900b12f19eb3
CRs-Fixed: 2984362
Disable WBM2SW1 HW cookie conversion as this ring is for FW usage,
FW does not expect HW cookie conversion for ring descriptor.
Change-Id: Ic4e813a21c6bb0f89d56581941e3c7ab8e3cad54
CRs-Fixed: 2994029
Allow all raw frames to the upper layer without checking
for port authorisation. All checks in raw mode has to be performed
by the controller in case of raw mode.
Change-Id: Ica6df24b359790fcadc9bb7bbb4d7b5084930170
Add number of page desc check for TX/RX desc_pool de-initialization,
avoid unexpected assert in case SPT page_desc_list is not
initialized like SSR case.
Change-Id: I970f0e09a0631260e1cb0d1de23a1de3e8d13f24
CRs-Fixed: 2991334
The existing assertions for unmapped variable in
rx descriptor results in an undesired bug_on since
the unmapped value is 0 for active descriptors.
The fix is to modify this assertion so that bug_on will
be triggered only if the unmapped value is 1 in rx
desc.
Change-Id: I03b27e0e42ce3c42b9fa148da9258063b0209b08
CRs-Fixed: 2985248
(1)naming change in HW CC related function
(2)refinement for cookie ID generation regardless of
SPT page address 4k aligned or not
(3)move CMEM size check under cookie conversion macro
Change-Id: Ib32d802f5512e5facfa4130826406943fb3d27f1
CRs-Fixed: 2977304
Add the handlers to process the near-full irqs for
the rx, tx_completion, wbm_error and reo_status rings.
Change-Id: Ia5a2abb6d66a96e8dcb5c651d24769382db0d666
CRs-Fixed: 2965081
Implement core DP rx processing to functions in to corresponding
architecture specific be/li rx files. Keep common utility functions
in DP common files.
Change-Id: I40083e10772fd2b6ce2f1fa9e197f2ad92d0522a
CRs-Fixed: 2891021
