In whitelist roaming, the roam offload event is sent
for an BSSID with different SSID, however host driver
copies the connected bssid in the external auth event
to the userspace. This leads to preauth failure.
Cache the ssid from the beacon received as part of the
roam frame event before every roam auth offload event
and use that ssid for external auth events to userspace.
Change-Id: I634992baf0c98054897707aaf3b1265e17d46f04
CRs-Fixed: 3262859
Add sysfs entry to configure status and dscp values
used by application for regular traffic and last packet
to mark traffic end.
Change-Id: Ib0e0aaf64e24da3b402b695840850b01c19a4991
CRs-Fixed: 3207451
Add ucfg APIs to set/get feature status and dscp
values and structure to store values
Change-Id: I839c89696581b8aefd873a120d938a5cbbc32899
CRs-Fixed: 3255692
If particular channel's last scan time is less than the last_scan_ageout
threshold, skip that channel from ACS scan frequency list.
This change optimises the ACS scan time by reducing the number of
channels in ACS scan request to firmware.
Change-Id: Id81815035a89039ef1f492a622c5d89cb4aa298e
CRs-Fixed: 3239387
Currently in peer assoc, MCS rates are filled on basis of on-channel
TDLS connection BW. For cases such as TDLS offchannel on 6 GHz, the bw
can go till 160 MHz and in peer assoc those MCS rates for bw 160 MHz
should also be filled. As fix, if offchannel 6 GHz is supported then
fill the MCS rates for 160 MHz BW as well.
Change-Id: I00605bd66f403f0171e0f81b9108d6460ef109c5
CRs-Fixed: 3250792
When build assoc req, partner link has no pe session yet, so it just get
original ht cap from mac->mlme_cfg->ht_caps.ht_cap_info, which is got from
CFG_HT_CAP_INFO with default 364, BIT1 supportedChannelWidthSet is 0.
Assoc link has no such issue, since pe session is created when build
assoc req, pDot11f->supportedChannelWidthSet is reconfiged in
populate_dot11f_ht_caps.
Change-Id: Iec7b34d8364618948e9ac2a50462bcb4ede13433
CRs-Fixed: 3267261
If DUT only supports one link, it does not set the partner info
in the probe request. But it tries to match the partner info when
it receives the ML probe response no matter the peer supports more
then one link. It causes the matching failure if peer supports two
links.
To resolve this issue, using the DUT's num_partner_links to control
the iteration.
Change-Id: I0e30cf1b566641dfd7eff5678f8d46be99005d51
CRs-Fixed: 3265252
Add support to populate MLO assoc request with EMLSR
subfields like EMLSR padding delay, transition delay that
are extracted from FW during ext service ready event.
Change-Id: Id5def8da6bef92ff6bf2101a7b3e0d8fb0cf3050
CRs-Fixed: 3262939
This reverts Change-Id: Id1f5172a7fc1792c83c8c1c20127de815f7e4980
to avoid deadlock between cnss_pm_notify and unregister_pm_notifier
during soft driver unload.
Change-Id: Ic82db9dc0ca9d6686df99926335af27abc61cdb5
CRs-Fixed: 3266366
The dynamic MAC address update for non-MLO netdev is not
updating the self-peer MAC address which is causing
reference count leak during VDEV destroy.
For non-MLO netdev always update the self-peer MAC address
and for MLO netdev, update self-peer MAC address only
on the link adapter which is associated to MLD adapter.
For non-MLO netdev, send MLD MAC address as NULL in the
request sent to FW set MAC address.
Change-Id: I37a4fdaef0fb8b274769295fd8a920ebd45ffae4
CRs-Fixed: 3265957
Based on new requirement add an INI to enable/disable
get wifi features support.
Change-Id: I45ec54ac781724c2eaffa657f203db3abae2b74e
CRs-Fixed: 3266164
Based on the new requirement, add support to get requested
feature set info from different feature components.
Change-Id: I1bfc097c8ae8c4ab678d4dc07b7932cf3272d851
CRs-Fixed: 3262868
Currently driver creates sysfs features file if fw provides
file name in oem data event, but it tries to free without
any condition, this leeds to an unexpected behaviour if
fw does not provides file name in oem data event.
To address above issue, free wifi features sysfs file only
if fw provides file name in oem data event.
Change-Id: Ida6a69846638ba6edd5d0e5322323ef66433b364
CRs-Fixed: 3266097
Currently host driver creates wifi kobject based on dump in
progress feature flag, because of this, other features can not
use this wifi kobject.
To address this issue, create wifi kobject if platform driver
does not creates this.
Change-Id: I0ce3616cd229e58de5ab929555be6e1a9eb09c6a
CRs-Fixed: 3262667
When radar is detected in EasyMesh agent, it should update its current
operating frequency as disallowed due to radar detection to EasyMesh
controller through channel preference report frame.
Indicate operating frequency to SON when radar is detected, so that
EasyMesh agent can notify it to EasyMesh controller.
Change-Id: I83de68c8a3aecd3588d14f59081d6676304093b9
CRs-Fixed: 3262578
To avoid unmeaningful roaming, when low RSSI trigger,
only roam when rx linkspeed is also bad.
Steps:
1. F/W indicates feature supported by:
wmi_service_linkspeed_roam_trigger_support
2. App sets vdev rx link speed threshold by vendor cmd.
3. Bus_bw_work gets rx link speed from data path periodically.
4. If found rx link speed change from good to poor, or poor to good, send
to F/W.
5. F/W low rssi roaming is triggered only when both RSSI and link speed are
poor.
Change-Id: I38c60c55cca80ad9c71fcffda6712ac5984daef0
CRs-Fixed: 3264981
Add a debug print in wlan_hdd_main.c to to differentiate
between hard and soft driver unload.
Change-Id: Ia1f2c7d90e86c03e94a2ef20d8d7eef5acc316f0
CRs-Fixed: 3266415
Driver is able to get rates info per MSDU, which can
exclude special frames like ARP, DHCP, etc. This change
is to refill the rates info parsing by rateflags from FW,
including legacy rate, MCS, NSS, BW, preamble, GI, etc.
Change-Id: I129d5f0dc48758d1a92ac0c3622c1761cdae8286
CRs-Fixed: 3257425
If driver SSR has happened after system suspend then RTPM lock
acquired during system suspend is not getting released which
leads to mismatch in RTPM reference count.
Use RTPM prevent suspend sync API to ensure system is in
resume state before acquiring RTPM prevent suspend lock
and in the driver SSR sequence, call to RTPM lock deinit
cleans up any acquired lock.
Change-Id: Icf1d564aa74d9c081a71fe173895e4d29b95c90b
CRs-Fixed: 3254539
Parse and store new ACS vendor attribute
QCA_WLAN_VENDOR_ATTR_ACS_LAST_SCAN_AGEOUT_TIME in SAP ACS
config.
Change-Id: If50224780192ed7b587505e973a8dabeab3459b2
CRs-Fixed: 3239372
Currently sap is not starting if all channels configured as coex
unsafe and if restriction mask is not set.
This change is to select unsafe channel if restriction mask is
not set and start the sap.
Change-Id: I4ccf887655066da6d6b50715f631dde6edfda598
CRs-Fixed: 3260305
Currently, host driver validates pe_session in lim to handle
set key response and send the set context response to sme if there
is no valid session. This is fine for STA, P2P and SAP modes as
there would be a valid session. But host driver does not need to
send set context response for NAN iface in NAN pairing protocol
as it doesn't have a valid pe_session and peer does not exist for
NAN iface. So, exempt the pe_session validation for NAN interface.
Change-Id: Iff3ca8b6a281fc0ab94ed8be683ae507e20a214e
CRs-Fixed: 3257689
